Results 1 to 4 of 4
Hello everyone! I have a problem with my UPS (Mustek Powermust 1000) software winpower! I have installed the linux version of winpower and it should look like this . It ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 06-07-2008 #1
Hello everyone! I have a problem with my UPS (Mustek Powermust 1000) software winpower! I have installed the linux version of winpower and it should look like this. It shows only my computer name but i can`t see the information above. I am using it with the usb cable! Can you please help me to make it work? On windows works fine! Thanks!
- 06-09-2008 #2
You need to add more detail for anyone to assist you to get it running.
You should also read http://tldp.org/HOWTO/html_single/UPS-HOWTO/
and Linux.com :: Adding a UPS to a desktop Linux machine and do a gogle search for others.
I have looked at your vendors s/w, if your running it correctly (assuming it does indeed work) there should be a USB associated with the UPS device. Mine looks like this (run "lsusb" to get your details).
Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptable Power Supply.
Also just do "dmesg >/tmp/dmesg-output.txt" and append a copy of /tmp/dmesg-output.txt file - this will assist further.
- 06-09-2008 #3
Hello! I am using gnome! I have tried to install knutclient but it fails! Firts i installed Network UPS Tools (nut). It dont`t appear in lsusb (it`s only my ptrinter and my webcam).
- 06-09-2008 #4
I am sorry i didn`t see it...here is my lsusb for the UPS:
Bus 001 Device 005: ID 0665:5161
driver = /usr/lib/ups/driver/megatec_usb port = /dev/hiddev0 desc = "Local UPS"
# /etc/init.d/upsd start Starting NUT UPS drivers failed