Burnig suse 10.1

[gassman]

Hi i am running into some sort of error when i try to burn the suse.iso with k3b it says:

attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply full blanking procedure
write failed: Input/output error
fatal error during recording input/output error

and it wont burn as you can imagine so if anybody can be of assistance its much appreciated

[antidrugue]

What does "Show Debugging Output" gives you? (in K3B)

[gassman]

show debuging report gives me this:

System
-----------------------
K3b Version: 0.12.15

KDE Version: 3.5.1 Level "a"
QT Version: 3.3.5
Kernel: 2.6.16.13-4-default
Devices
-----------------------
LITE-ON DVDRW LDW-411S FS0H (/dev/hdg, ) at [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]

LITE-ON LTR-48246S SGS3 (/dev/hdh, ) at [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
Used versions
-----------------------
growisofs: 6.1

growisofs
-----------------------
Executing 'builtin_dd if=/home/eric/SUSE-Linux-10.1-GM-DVD-i386.iso of=/dev/hdg obs=32k seek=0'
/dev/hdg: "Current Write Speed" is 1.0x1385KBps.
:-[ WRITE@LBA=0h failed with SK=5h/ASC=64h/ACQ=00h]: Input/output error
attempt to re-run with -dvd-compat -dvd-compat to engage DAO or apply full blanking procedure
write failed: Input/output error

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdg=/home/eric/SUSE-Linux-10.1-GM-DVD-i386.iso -use-the-force-luke=notray -use-the-force-luke=tty -dvd-compat -speed=1 -use-the-force-luke=bufsize:32m

[antidrugue]

Try other modes than "AUTO" in "Writing Modes", and see if it gives you other errors in "Show Debugging Output".

Plus, did you try burning a dvd from the commandline and using the suggested
options? -dvd-compat -dvd-compat or to use dvd+rw-format -blank=full?

Or perhaps a firmware upgrade on the DVD drive would do the trick.