Hey, i installed gift, along with the openft-plugin, and giFT-ui....

when i run giftd, i get this error:
*** GIFT-FATAL: Failed to load interface subsystem

NOTE:
There may be another giFT daemon running on this host. Check to see if the
interface port (1213) is currently in use by another process.


BTW, Here's my config file:
================================================== ==============



# $Id: giftd.conf.template,v 1.2 2003/12/12 12:15:49 jasta Exp $
################################################## #############################

################################################## #############################
# MAIN

[main]

#
# Boolean determining whether or not this file has been reviewed and is
# complete. giFT will fail to start unless this is non-zero. This is done
# so that we can make sure you, at the very least, read through this file.
#
# Default: 0
#
setup = 1

#
# Space separated list of hosts to allow connection to giFT's interface
# protocol (running default on port 1213). This protocol is used for GUIs
# to communicate with giFT and could be considered a security risk to allow
# external connections.
#
# The following special keywords are supported:
#
# ALL - Synonym for 0.0.0.0/0
# LOCAL - Synonym for 127.0.0.0/8 192.168.0.0/16 172.0.0.0/11 10.0.0.0/8
#
# Bitwidth fields are optional.
#
# Default: LOCAL
#
hosts_allow = LOCAL

#
# Port on which to listen for user interface connections. Unless you have a
# special need to talk to the client on a non-standard port, just accept the
# default.
#
# NOTE:
# If you change this value, you will also need to modify the ui.conf
# configuration for the machine which will be making outgoing connections
# here.
#
client_port = 1213

#
# Determines whether or not to follow symbolic links. If this value is set
# non-zero, symlinks will be traversed and a directory inode tracking system
# will be used to ensure that giFT does not descend the same directory
# twice. If you do not have any symlinks or do not want them traversed, set
# this to 0 for a very minor efficiency gain.
#
# Windows users: this setting has no effect.
#
# Default: 1
#
follow_symlinks = 1

#
# Colon separated list of protocol plugins to load by default. If dynamic
# library support is enabled, the plugin specified will be stat'd to check if
# it is a loadable path. If that fails, the fallback method is to attempt to
# construct the fully qualified path based on the configured environment.
#
# NOTES:
# Without dynamic library support, this plugin must have been compiled into
# your giFT binary. With, this plugin must exist in the installed
# plugin directory. giFT -V will output this path to you, if you are not
# sure.
#
# Protocol names are case sensitive, so use OpenFT, not Openft.
#
# For example, to use the OpenFT and Gnutella protocols use:
#
# OpenFT:Gnutella
#
# Default: none
#
plugins = OpenFT

################################################## #############################
# DOWNLOAD CONTROLS

[download]

#
# Directory to store transfers while they are being operated on. Temporary
# state files are also kept here. It is recommended, but not required, that
# the incoming and completed directories are on the same partition (drive).
#
# Windows users: please use the following path specification:
#
# incoming=/[drive]/dir1/dir2
#
# For example, to refer to C:\Program Files\giFT\incoming, use:
#
# incoming=/C/Program Files/giFT/incoming
#
# Default (*nix): ~/.giFT/incoming
# Default (Windows): /C/Program Files/giFT/incoming
#
incoming = /file

#
# Directory which will contain files after they have successfully finished
# downloading.
#
# Default (*nix): ~/.giFT/completed
# Default (Windows): /C/Program Files/giFT/completed
#
completed = ~/filelib

################################################## #############################
# SHARE SUBMISSION AND UPLOAD CONTROL

[sharing]

#
# Maximum amount of uploads allowed from the same user at any given time. It
# is recommended that you keep this at 1 in order to prevent users from
# unfairly queueing your connection.
#
# Default: 1
#
max_peruser_uploads = 1

#
# Determines whether or not to hide directories which contain a leading dot.
# These directories are commonly meant to be "hidden" and thus should not be
# submitted to the network. Selecting 0 here will submit all directories.
#
# Default: 1
#
hide_dot_files = 1

#
# Colon separated list of fully qualified paths you wish to share. These
# directories will be recursed at giFT's startup and the files contained
# within will be subjected to an MD5 hashing. The results will be cached and
# will only be recalculated on a per share basis when the size or
# modification time in the cache and on disk disagree, or the file name is
# changed.
#
# Sanity notice:
# Do NOT share source directories! Remote nodes will refuse to index your
# shares if you are attempting to submit more than 64000 files.
#
# Security notice:
# Do not share directories which may contain sensitive information, such as
# ~ ($HOME). Also note that any directories shared here will be stripped of
# all but the last path element when submitted to other nodes for indexing,
# effectively "hiding" the directory prefix.
#
# Windows users: please use the following path specification:
#
# /[drive]/dir1/dir2:/[drive]/dir3/dir4 ...
#
# For example, to refer to C:\Program Files\giFT\shares and D:\shares, use:
#
# /C/Program Files/giFT/shares:/D/shares
#
# Default: none
#
root =

#
# Maximum amount of simultaneous uploads allowed. Setting this to -1 will
# cause giFT to not limit outgoing transfers. 0 effectively disables sharing.
# This may also be handled at run time via your GUI of choice.
#
# Default: -1
#
max_uploads = -1

#
# Controls when giFT periodically rescans your shared directories for any
# changes (new files, missing files, changed files, etc.) and communicates
# those changes to the underlying protocols. This parameter specifies how
# often (in seconds) you want that to happen.
#
# For your reference
# ==================
# 0 turns off periodic auto-resync
# 3600 one hour
# 86400 one day
# 604800 one week
#
# Default: 86400
#
auto_resync_interval = 86400

#
# Controls whether or not giFT should automatically share files that you have
# finished downloading. This feature significantly improves the network's
# abundance of files and helps ease the load on those sharing popular files.
# It's a Good Thing (TM), please leave it on.
#
# Avoid setting your completed directories through sharing/root, as that
# setting will duplicate recursion of the completed directory and cause
# generally undesirable results.
#
# Default: 1
#
share_completed = 1

################################################## #############################
# USER SPACE BANDWIDTH CONTROL

[bandwidth]

#
# Bandwidth throttling allows giFT to have some basic control over your
# bandwidth usage. This code operates in user space, and as a result can not
# guarantee perfect accuracy. If you wish to use this feature, please
# consider using a more reliable kernel space option first. As always, google
# should be able to assist you there.
#
# The following configuration switches control the maximum number of bytes
# per second allowed for the given stream direction. A setting of 0 will
# disable throttling for that direction.
#
# Default: 0
#
downstream = 0
upstream = 0


thanks,
keyshawn