OK, so I got new memory for my machine... and I put it in
Noticed the soundcard was loose, it wobbled in its slot, took it out, put it back in (the same slot) and tightened screw.
Now my sound doesn't work!!
When I first installed redhat it wouldnt work cause i have onboard sound and it was trying to use that rather then SB Live!.... i had a friend root into my box and fix it... worked like a charm but he hasnt been online latley...
So... what do I do to change it so it uses my SB live?
PS. I _need_ my mic to work as well.... I do net coferencing... my friend was able to get that to work too... a mic jack is in the sb live!
here is the output os lsmod - which people ask for alot when thers soundcard issues
[root@Uberleet-Terminal sbin]# ./lsmod
Module Size Used by Tainted: PF
emu10k1 69032 0 (autoclean)
ac97_codec 13640 0 (autoclean) [emu10k1]
sound 74228 0 (autoclean) [emu10k1]
soundcore 6404 7 (autoclean) [emu10k1 sound]
radeon 116132 1
agpgart 47776 3
binfmt_misc 7400 1
vmnet 23720 6
vmmon 28084 0 (unused)
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
iptable_filter 2412 0 (autoclean) (unused)
tulip 43840 1
iptable_mangle 2776 0 (autoclean) (unused)
iptable_nat 21720 0 (autoclean) (unused)
ip_conntrack 26976 1 (autoclean) [iptable_nat]
ip_tables 15096 5 [iptable_filter iptable_mangle iptable_nat]
sg 36524 0 (autoclean)
sr_mod 18136 0 (autoclean)
microcode 4668 0 (autoclean)
ide-scsi 12208 0
scsi_mod 107160 3 [sg sr_mod ide-scsi]
ide-cd 35708 0
cdrom 33728 0 [sr_mod ide-cd]
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [keybdev mousedev hid]
usb-uhci 26348 0 (unused)
usbcore 78784 1 [hid usb-uhci]
ext3 70784 2
jbd 51892 2 [ext3]
We'll need the output of lspci as well.
[jon@Uberleet-Terminal sbin]$ ./lspci
00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 02)
00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 04)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY
02:02.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
02:04.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
02:04.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
02:06.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 04)
Your motherboard is very strange... do you know why it has three PCI buses?
Anyway, check your mixer settings. It might be that your sound is simply muted.
It's an ABIT motherboard... 3 pci busses, no idea.
Anyways... I wish it was as simple as it being muted. I checked the mixer before I ever posted here because well... we all know... the mixer can get jacked around with for some unknown reason sometimes...
Anyways... I hope someone has some ideas
Does it seem like it's working, only that you don't actually get the sound, or is it clearly not working? Ie., what happens if you run "ps aux >/dev/dsp"?
[jon@Uberleet-Terminal jon]$ ps aux >/dev/dsp
heres some new info to my problem -- the un-touched /etc/modules.conf file
alias eth0 tulip
alias usb-controller usb-uhci
alias sound-slot-0 emu10k1
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&$pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 $
A guy on linuxquestions.org told me to add
alias sound-slot-1 snd-emu10k1
above snd-emu10k1 snd-pcm-oss ----- but it didn't do a damn thing....
any more suggestions?
It is strange indeed. Can you check your logs for any weird kernel messages? Also, just to be absolutely sure, can you send the output of "aumix -q"?
o[jon@Uberleet-Terminal jon]$ aumix -q
vol 60, 60
pcm 100, 100
speaker 70, 0
line 67, 67, P
mic 0, 0, R
cd 67, 67, P
igain 67, 67, P
ogain 72, 72
line1 67, 67, P
dig1 67, 67
phin 67, 0, P
phout 67, 0
video 67, 67, P
Yeah, I didn't think that there were going to be any errors there. Anyhow, did you find any kernel messages? Try reloading the modules and so and see if that logs anything.