Find the answer to your Linux question:
Page 2 of 2 FirstFirst 1 2
Results 11 to 16 of 16
Originally Posted by reed9 Well, everything looks ok. eth0 is showing up as your wireless interface. Does this return any available wireless networks? Code: su - ifconfig eth0 up iwlist ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Just Joined!
    Join Date
    Jan 2011
    Posts
    9

    Quote Originally Posted by reed9 View Post
    Well, everything looks ok. eth0 is showing up as your wireless interface.

    Does this return any available wireless networks?
    Code:
    su -
    ifconfig eth0 up
    iwlist eth0 scan
    Yes it does:
    Code:
    eth0      Scan completed :
              Cell 01 - Address: 00:24:56:D4:56:71
                        ESSID:"2WIRE473"
                        Protocol:IEEE 802.11bg
                        Mode:Master
                        Frequency:2.427 GHz (Channel 4)
                        Encryption key:on
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                                  11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                                  48 Mb/s; 54 Mb/s
                        Quality=50/100  Signal level=-71 dBm  
                        IE: WPA Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (1) : TKIP
                            Authentication Suites (1) : PSK
                        Extra: Last beacon: 166ms ago
              Cell 02 - Address: 00:0D:72:23:2A:01
                        ESSID:"2WIRE651"
                        Protocol:IEEE 802.11b
                        Mode:Master
                        Frequency:2.437 GHz (Channel 6)
                        Encryption key:off
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s
                        Quality=41/100  Signal level=-76 dBm  
                        Extra: Last beacon: 123ms ago
              Cell 03 - Address: 00:1E:8C:3E:7F:BB
                        ESSID:"Megyeri"
                        Protocol:IEEE 802.11bg
                        Mode:Master
                        Frequency:2.462 GHz (Channel 11)
                        Encryption key:on
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
                                  11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                                  48 Mb/s; 54 Mb/s
                        Quality=68/100  Signal level=-59 dBm  
                        Extra: Last beacon: 23ms ago
    The one I want to connect to is "Megyeri" if that changes anything. :P (WEP encrypted)

  2. #12
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    The wireless appears to be working fine then. How are you wanting to connect? Using rc.conf? Using a network manager like wicd?

    The basic command line way would be
    Code:
    su -
    iwconfig eth0 essid "Megyeri" key 1111-1111-1111-1111
    dhcpcd eth0
    (Replace the string of 1's with your 128-bit wep hex key.)

    Or for 64 bit hex
    Code:
    iwconfig eth0 essid "Megyeri" key 11111111 
    dhcpcd eth0
    Or for a WEP passphrase
    Code:
    iwconfig eth0 essid "Megyeri" key s:mykey 
    dhcpcd eth0
    In rc.conf you could do
    Code:
    eth0="dhcp"
    wlan_eth0="eth0 essid Megyeri" key s:mykey
    or you can use netcfg. Using wifi-select with netcfg is handy.

  3. #13
    Just Joined!
    Join Date
    Jan 2011
    Posts
    9
    Code:
    iwconfig eth0 essid "Megyeri" key 11111111 
    dhcpcd eth0
    I type this in and got the same error
    Code:
    Error for wireless request "Set ESSID" (8B1A) :
          Set failed on device eth0 ; Operation not supported.
    EDIT: I tried eth1 and I got something else, I than tried pacman -Syu and got the "package not found" or whatever. I am going to try putting eth1 as my wireless in /etc/rc.conf and see if that helps.

    EDIT2: I have to go again soon, I am going to try a couple things and will reply when I get back from school. Thank you for the help so far.
    Last edited by tethyrian; 01-19-2011 at 01:15 PM.

  4. #14
    Linux Guru reed9's Avatar
    Join Date
    Feb 2009
    Location
    Boston, MA
    Posts
    4,651
    Hmm. It seems like that may be an issue with firmware.

    Can you try again and then post the output of dmesg
    Code:
    su -
    ifconfig eth0 up
    iwconfig eth0 essid "Megyeri" key 11111111
    dhcpcd eth0
    (Again replace the 1's with the appropriate key)

    And then for the dmesg output in a text file
    Code:
    dmesg > dmesg.txt

  5. #15
    Just Joined!
    Join Date
    Jan 2011
    Posts
    9
    Quote Originally Posted by reed9 View Post
    Hmm. It seems like that may be an issue with firmware.

    Can you try again and then post the output of dmesg
    Code:
    su -
    ifconfig eth0 up
    iwconfig eth0 essid "Megyeri" key 11111111
    dhcpcd eth0
    (Again replace the 1's with the appropriate key)

    And then for the dmesg output in a text file
    Code:
    dmesg > dmesg.txt
    I still get the cannot set error when I do iwconfig, here is the dmesg:
    Code:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
     BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
     BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
     BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
     BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
     BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
     BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
     BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
     BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    DMI 2.3 present.
    last_pfn = 0x1f7d3 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
      00000-9FFFF write-back
      A0000-BFFFF uncachable
      C0000-CFFFF write-protect
      D0000-EFFFF uncachable
      F0000-FFFFF write-protect
    MTRR variable ranges enabled:
      0 base 000000000 mask FE0000000 write-back
      1 base 01F800000 mask FFF800000 uncachable
      2 base 0FEDA0000 mask FFFFE0000 write-through
      3 disabled
      4 disabled
      5 disabled
      6 disabled
      7 disabled
    PAT not supported by CPU.
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
     modified: 0000000000000000 - 0000000000002000 (usable)
     modified: 0000000000002000 - 0000000000010000 (reserved)
     modified: 0000000000010000 - 000000000009f000 (usable)
     modified: 000000000009f000 - 00000000000a0000 (reserved)
     modified: 0000000000100000 - 000000001f7d3800 (usable)
     modified: 000000001f7d3800 - 0000000020000000 (reserved)
     modified: 00000000e0000000 - 00000000f0007000 (reserved)
     modified: 00000000f0008000 - 00000000f000c000 (reserved)
     modified: 00000000fec00000 - 00000000fec10000 (reserved)
     modified: 00000000fed20000 - 00000000fee10000 (reserved)
     modified: 00000000ffb00000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-000000001f7d3000
     0000000000 - 0000400000 page 4k
     0000400000 - 001f400000 page 2M
     001f400000 - 001f7d3000 page 4k
    kernel direct mapping tables up to 1f7d3000 @ 15000-1a000
    RAMDISK: 1f641000 - 1f7c33bc
    ACPI: RSDP 000fc9b0 00014 (v00 DELL  )
    ACPI: RSDT 1f7d3fd3 00040 (v01 DELL    CPi R   27D5091C ASL  00000061)
    ACPI: FACP 1f7d4c00 00074 (v01 DELL    CPi R   27D5091C ASL  00000061)
    ACPI: DSDT 1f7d5800 03107 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
    ACPI: FACS 1f7e4000 00040
    ACPI: APIC 1f7d5400 00068 (v01 DELL    CPi R   27D5091C ASL  00000047)
    ACPI: MCFG 1f7d53c0 0003E (v16 DELL    CPi R   27D5091C ASL  00000061)
    ACPI: BOOT 1f7d4fc0 00028 (v01 DELL    CPi R   27D5091C ASL  00000061)
    ACPI: SSDT 1f7d43e6 002C2 (v01  PmRef  Cpu0Ist 00003000 INTL 20030522)
    ACPI: SSDT 1f7d420e 001D8 (v01  PmRef  Cpu0Cst 00003001 INTL 20030522)
    ACPI: SSDT 1f7d4013 001FB (v01  PmRef    CpuPm 00003000 INTL 20030522)
    ACPI: Local APIC address 0xfee00000
    0MB HIGHMEM available.
    503MB LOWMEM available.
      mapped low ram: 0 - 1f7d3000
      low ram: 0 - 1f7d3000
      node 0 low ram: 00000000 - 1f7d3000
      node 0 bootmap 00016000 - 00019efc
    (10 early reservations) ==> bootmem [0000000000 - 001f7d3000]
      #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
      #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
      #2 [0001000000 - 0001550444]    TEXT DATA BSS ==> [0001000000 - 0001550444]
      #3 [001f641000 - 001f7c33bc]          RAMDISK ==> [001f641000 - 001f7c33bc]
      #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
      #5 [0001551000 - 0001557188]              BRK ==> [0001551000 - 0001557188]
      #6 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
      #7 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
      #8 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
      #9 [0000016000 - 000001a000]          BOOTMAP ==> [0000016000 - 000001a000]
    Zone PFN ranges:
      DMA      0x00000000 -> 0x00001000
      Normal   0x00001000 -> 0x0001f7d3
      HighMem  0x0001f7d3 -> 0x0001f7d3
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
        0: 0x00000000 -> 0x00000002
        0: 0x00000010 -> 0x0000009f
        0: 0x00000100 -> 0x0001f7d3
    On node 0 totalpages: 128868
    free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 3953 pages, LIFO batch:0
      Normal zone: 976 pages used for memmap
      Normal zone: 123907 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    SMP: Allowing 2 CPUs, 1 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u2097152
    pcpu-alloc: s34776 r0 d22568 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1 
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127860
    Kernel command line: root=/dev/disk/by-uuid/be0e7436-fe13-4420-bae6-56a6a36080d1 ro
    PID hash table entries: 2048 (order: 1, 8192 bytes)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 2579580 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Initializing HighMem for node 0 (00000000:00000000)
    Memory: 501028k/515916k available (2895k kernel code, 14128k reserved, 1208k data, 408k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xdffd3000 - 0xff7fe000   ( 504 MB)
        lowmem  : 0xc0000000 - 0xdf7d3000   ( 503 MB)
          .init : 0xc1403000 - 0xc1469000   ( 408 kB)
          .data : 0xc12d3f1e - 0xc14022e0   (1208 kB)
          .text : 0xc1000000 - 0xc12d3f1e   (2895 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:512
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Fast TSC calibration using PIT
    Detected 598.459 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1197.78 BogoMIPS (lpj=1994863)
    Security Framework initialized
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    mce: CPU supports 5 MCE banks
    CPU0: Thermal monitoring enabled (TM1)
    Performance Events: p6 PMU driver.
    ... version:                0
    ... bit width:              32
    ... generic registers:      2
    ... value mask:             00000000ffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   0
    ... event mask:             0000000000000003
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    ACPI: Core revision 20091214
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
    Brought up 1 CPUs
    Total of 1 processors activated (1197.78 BogoMIPS).
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
    pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
    pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xdfffffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
    pci 0000:00:02.0: reg 10: [mem 0xdff00000-0xdff7ffff]
    pci 0000:00:02.0: reg 14: [io  0xec38-0xec3f]
    pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
    pci 0000:00:02.0: reg 1c: [mem 0xdfec0000-0xdfefffff]
    pci 0000:00:02.1: reg 10: [mem 0xdff80000-0xdfffffff]
    pci 0000:00:1d.0: reg 20: [io  0xbf80-0xbf9f]
    pci 0000:00:1d.1: reg 20: [io  0xbf60-0xbf7f]
    pci 0000:00:1d.2: reg 20: [io  0xbf40-0xbf5f]
    pci 0000:00:1d.3: reg 20: [io  0xbf20-0xbf3f]
    pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1e.2: reg 10: [io  0xed00-0xedff]
    pci 0000:00:1e.2: reg 14: [io  0xec40-0xec7f]
    pci 0000:00:1e.2: reg 18: [mem 0xdfebfe00-0xdfebffff]
    pci 0000:00:1e.2: reg 1c: [mem 0xdfebfd00-0xdfebfdff]
    pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1e.2: PME# disabled
    pci 0000:00:1e.3: reg 10: [io  0xee00-0xeeff]
    pci 0000:00:1e.3: reg 14: [io  0xec80-0xecff]
    pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1e.3: PME# disabled
    pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
    pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
    pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
    pci 0000:00:1f.2: reg 10: [io  0x01f0-0x01f7]
    pci 0000:00:1f.2: reg 14: [io  0x03f4-0x03f7]
    pci 0000:00:1f.2: reg 18: [io  0x0170-0x0177]
    pci 0000:00:1f.2: reg 1c: [io  0x0374-0x0377]
    pci 0000:00:1f.2: reg 20: [io  0xbfa0-0xbfaf]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:03:00.0: reg 10: [mem 0xdfdfe000-0xdfdfffff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:03:01.0: reg 10: [mem 0x00000000-0x00000fff]
    pci 0000:03:01.0: supports D1 D2
    pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.0: PME# disabled
    pci 0000:03:01.1: reg 10: [mem 0xdfdfc800-0xdfdfcfff]
    pci 0000:03:01.1: supports D1 D2
    pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.1: PME# disabled
    pci 0000:03:01.2: reg 10: [mem 0xdfdfc700-0xdfdfc7ff]
    pci 0000:03:01.2: supports D1 D2
    pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:01.2: PME# disabled
    pci 0000:03:03.0: reg 10: [mem 0xdfdfd000-0xdfdfdfff]
    pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
    pci 0000:03:03.0: PME# disabled
    pci 0000:00:1e.0: PCI bridge to [bus 03-04] (subtractive decode)
    pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
    pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:03 [bus 03-04]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    hpet clockevent registered
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:02: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    pnp 00:02: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    pnp 00:03: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    pnp 00:03: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    pnp 00:03: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
    system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
    system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
    system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    system 00:00: [mem 0x00100000-0x1f7d37ff] could not be reserved
    system 00:00: [mem 0x1f7d3800-0x1f7fffff] has been reserved
    system 00:00: [mem 0x1f800000-0x1fffffff] has been reserved
    system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
    system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
    system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
    system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
    system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
    system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
    system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
    system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
    system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
    system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:02: [io  0x04d0-0x04d1] has been reserved
    system 00:03: [io  0xf400-0xf4fe] has been reserved
    system 00:03: [io  0x1080-0x10bf] has been reserved
    system 00:03: [io  0x10c0-0x10df] has been reserved
    system 00:03: [io  0x10e0-0x10ff] has been reserved
    system 00:08: [io  0x0900-0x090f] has been reserved
    system 00:08: [io  0x0910-0x091f] has been reserved
    system 00:08: [io  0x0920-0x092f] has been reserved
    system 00:08: [io  0x0930-0x093f] has been reserved
    system 00:08: [io  0x0940-0x097f] has been reserved
    system 00:0b: [io  0x07b0-0x07bb] has been reserved
    system 00:0b: [io  0x07c0-0x07df] has been reserved
    system 00:0b: [io  0x0bb0-0x0bbb] has been reserved
    system 00:0b: [io  0x0bc0-0x0bdf] has been reserved
    system 00:0b: [io  0x0fb0-0x0fbb] has been reserved
    system 00:0b: [io  0x0fc0-0x0fdf] has been reserved
    system 00:0b: [io  0x13b0-0x13bb] has been reserved
    system 00:0b: [io  0x13c0-0x13df] has been reserved
    system 00:0b: [io  0x17b0-0x17bb] has been reserved
    system 00:0b: [io  0x17c0-0x17df] has been reserved
    system 00:0b: [io  0x1bb0-0x1bbb] has been reserved
    system 00:0b: [io  0x1bc0-0x1bdf] has been reserved
    system 00:0b: [io  0x1fb0-0x1fbb] has been reserved
    system 00:0b: [io  0x1fc0-0x1fdf] has been reserved
    system 00:0b: [io  0x23b0-0x23bb] has been reserved
    system 00:0b: [io  0x23c0-0x23df] has been reserved
    system 00:0b: [io  0x27b0-0x27bb] has been reserved
    system 00:0b: [io  0x27c0-0x27df] has been reserved
    system 00:0b: [io  0x2bb0-0x2bbb] has been reserved
    system 00:0b: [io  0x2bc0-0x2bdf] has been reserved
    system 00:0b: [io  0x2fb0-0x2fbb] has been reserved
    system 00:0b: [io  0x2fc0-0x2fdf] has been reserved
    system 00:0b: [io  0x33b0-0x33bb] has been reserved
    system 00:0b: [io  0x33c0-0x33df] has been reserved
    system 00:0b: [io  0x37b0-0x37bb] has been reserved
    system 00:0b: [io  0x37c0-0x37df] has been reserved
    system 00:0b: [io  0x3bb0-0x3bbb] has been reserved
    system 00:0b: [io  0x3bc0-0x3bdf] has been reserved
    system 00:0b: [io  0x3fb0-0x3fbb] has been reserved
    system 00:0b: [io  0x3fc0-0x3fdf] has been reserved
    system 00:0b: [io  0x43b0-0x43bb] has been reserved
    system 00:0b: [io  0x43c0-0x43df] has been reserved
    system 00:0b: [io  0x47b0-0x47bb] has been reserved
    system 00:0b: [io  0x47c0-0x47df] has been reserved
    system 00:0b: [io  0x4bb0-0x4bbb] has been reserved
    system 00:0b: [io  0x4bc0-0x4bdf] has been reserved
    system 00:0b: [io  0x4fb0-0x4fbb] has been reserved
    system 00:0b: [io  0x4fc0-0x4fdf] has been reserved
    system 00:0b: [io  0x53b0-0x53bb] has been reserved
    system 00:0b: [io  0x53c0-0x53df] has been reserved
    system 00:0b: [io  0x57b0-0x57bb] has been reserved
    system 00:0b: [io  0x57c0-0x57df] has been reserved
    system 00:0b: [io  0x5bb0-0x5bbb] has been reserved
    system 00:0b: [io  0x5bc0-0x5bdf] has been reserved
    system 00:0b: [io  0x5fb0-0x5fbb] has been reserved
    system 00:0b: [io  0x5fc0-0x5fdf] has been reserved
    system 00:0b: [io  0x63b0-0x63bb] has been reserved
    system 00:0b: [io  0x63c0-0x63df] has been reserved
    system 00:0b: [io  0x67b0-0x67bb] has been reserved
    system 00:0b: [io  0x67c0-0x67df] has been reserved
    system 00:0b: [io  0x6bb0-0x6bbb] has been reserved
    system 00:0b: [io  0x6bc0-0x6bdf] has been reserved
    system 00:0b: [io  0x6fb0-0x6fbb] has been reserved
    system 00:0b: [io  0x6fc0-0x6fdf] has been reserved
    system 00:0b: [io  0x73b0-0x73bb] has been reserved
    system 00:0b: [io  0x73c0-0x73df] has been reserved
    system 00:0b: [io  0x77b0-0x77bb] has been reserved
    system 00:0b: [io  0x77c0-0x77df] has been reserved
    system 00:0b: [io  0x7bb0-0x7bbb] has been reserved
    system 00:0b: [io  0x7bc0-0x7bdf] has been reserved
    system 00:0b: [io  0x7fb0-0x7fbb] has been reserved
    system 00:0b: [io  0x7fc0-0x7fdf] has been reserved
    system 00:0b: [io  0x83b0-0x83bb] has been reserved
    system 00:0b: [io  0x83c0-0x83df] has been reserved
    system 00:0b: [io  0x87b0-0x87bb] has been reserved
    system 00:0b: [io  0x87c0-0x87df] has been reserved
    system 00:0b: [io  0x8bb0-0x8bbb] has been reserved
    system 00:0b: [io  0x8bc0-0x8bdf] has been reserved
    system 00:0b: [io  0x8fb0-0x8fbb] has been reserved
    system 00:0b: [io  0x8fc0-0x8fdf] has been reserved
    system 00:0b: [io  0x93b0-0x93bb] has been reserved
    system 00:0b: [io  0x93c0-0x93df] has been reserved
    system 00:0b: [io  0x97b0-0x97bb] has been reserved
    system 00:0b: [io  0x97c0-0x97df] has been reserved
    system 00:0b: [io  0x9bb0-0x9bbb] has been reserved
    system 00:0b: [io  0x9bc0-0x9bdf] has been reserved
    system 00:0b: [io  0x9fb0-0x9fbb] has been reserved
    system 00:0b: [io  0x9fc0-0x9fdf] has been reserved
    system 00:0b: [io  0xa3b0-0xa3bb] has been reserved
    system 00:0b: [io  0xa3c0-0xa3df] has been reserved
    system 00:0b: [io  0xa7b0-0xa7bb] has been reserved
    system 00:0b: [io  0xa7c0-0xa7df] has been reserved
    system 00:0b: [io  0xabb0-0xabbb] has been reserved
    system 00:0b: [io  0xabc0-0xabdf] has been reserved
    system 00:0b: [io  0xafb0-0xafbb] has been reserved
    system 00:0b: [io  0xafc0-0xafdf] has been reserved
    system 00:0b: [io  0xb3b0-0xb3bb] has been reserved
    system 00:0b: [io  0xb3c0-0xb3df] has been reserved
    system 00:0b: [io  0xb7b0-0xb7bb] has been reserved
    system 00:0b: [io  0xb7c0-0xb7df] has been reserved
    system 00:0b: [io  0xbbb0-0xbbbb] has been reserved
    system 00:0b: [io  0xbbc0-0xbbdf] has been reserved
    system 00:0b: [io  0xbfb0-0xbfbb] has been reserved
    system 00:0b: [io  0xbfc0-0xbfdf] has been reserved
    system 00:0b: [io  0xc3b0-0xc3bb] has been reserved
    system 00:0b: [io  0xc3c0-0xc3df] has been reserved
    system 00:0b: [io  0xc7b0-0xc7bb] has been reserved
    system 00:0b: [io  0xc7c0-0xc7df] has been reserved
    system 00:0b: [io  0xcbb0-0xcbbb] has been reserved
    system 00:0b: [io  0xcbc0-0xcbdf] has been reserved
    system 00:0b: [io  0xcfb0-0xcfbb] has been reserved
    system 00:0b: [io  0xcfc0-0xcfdf] has been reserved
    system 00:0b: [io  0xd3b0-0xd3bb] has been reserved
    system 00:0b: [io  0xd3c0-0xd3df] has been reserved
    system 00:0b: [io  0xd7b0-0xd7bb] has been reserved
    system 00:0b: [io  0xd7c0-0xd7df] has been reserved
    system 00:0b: [io  0xdbb0-0xdbbb] has been reserved
    system 00:0b: [io  0xdbc0-0xdbdf] has been reserved
    system 00:0b: [io  0xdfb0-0xdfbb] has been reserved
    system 00:0b: [io  0xdfc0-0xdfdf] has been reserved
    system 00:0b: [io  0xe3b0-0xe3bb] has been reserved
    system 00:0b: [io  0xe3c0-0xe3df] has been reserved
    system 00:0b: [io  0xe7b0-0xe7bb] has been reserved
    system 00:0b: [io  0xe7c0-0xe7df] has been reserved
    system 00:0b: [io  0xebb0-0xebbb] has been reserved
    system 00:0b: [io  0xebc0-0xebdf] has been reserved
    system 00:0b: [io  0xefb0-0xefbb] has been reserved
    system 00:0b: [io  0xefc0-0xefdf] has been reserved
    system 00:0b: [io  0xf3b0-0xf3bb] has been reserved
    system 00:0b: [io  0xf3c0-0xf3df] has been reserved
    system 00:0b: [io  0xf7b0-0xf7bb] has been reserved
    system 00:0b: [io  0xf7c0-0xf7df] has been reserved
    system 00:0b: [io  0xfbb0-0xfbbb] has been reserved
    system 00:0b: [io  0xfbc0-0xfbdf] has been reserved
    system 00:0b: [io  0xffb0-0xffbb] has been reserved
    system 00:0b: [io  0xffc0-0xffdf] has been reserved
    pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
    pci 0000:00:1e.0: BAR 13: can't assign io (size 0x1000)
    pci 0000:03:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
    pci 0000:03:01.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
    pci 0000:03:01.0: BAR 0: assigned [mem 0xdfd00000-0xdfd00fff]
    pci 0000:03:01.0: BAR 0: set to [mem 0xdfd00000-0xdfd00fff] (PCI address [0xdfd00000-0xdfd00fff]
    pci 0000:03:01.0: BAR 13: assigned [io  0x1400-0x14ff]
    pci 0000:03:01.0: BAR 14: assigned [io  0x1800-0x18ff]
    pci 0000:03:01.0: CardBus bridge to [bus 04-07]
    pci 0000:03:01.0:   bridge window [io  0x1400-0x14ff]
    pci 0000:03:01.0:   bridge window [io  0x1800-0x18ff]
    pci 0000:03:01.0:   bridge window [mem 0x20000000-0x23ffffff pref]
    pci 0000:03:01.0:   bridge window [mem 0x24000000-0x27ffffff]
    pci 0000:00:1e.0: PCI bridge to [bus 03-04]
    pci 0000:00:1e.0:   bridge window [io  disabled]
    pci 0000:00:1e.0:   bridge window [mem 0xdfd00000-0xdfdfffff]
    pci 0000:00:1e.0:   bridge window [mem 0x20000000-0x23ffffff pref]
    pci 0000:00:1e.0: setting latency timer to 64
    pci 0000:03:01.0: enabling device (0000 -> 0003)
    pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:03: resource 1 [mem 0xdfd00000-0xdfdfffff]
    pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
    pci_bus 0000:03: resource 3 [io  0x0000-0xffff]
    pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
    pci_bus 0000:04: resource 0 [io  0x1400-0x14ff]
    pci_bus 0000:04: resource 1 [io  0x1800-0x18ff]
    pci_bus 0000:04: resource 2 [mem 0x20000000-0x23ffffff pref]
    pci_bus 0000:04: resource 3 [mem 0x24000000-0x27ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1544k freed
    Simple Boot Flag at 0x79 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1295469756.633:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 982
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    serial 0000:00:1e.3: PCI INT B disabled
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 408k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ahci 0000:00:1f.2: PCI INT B disabled
    ahci: probe of 0000:00:1f.2 failed with error -22
    ata_piix 0000:00:1f.2: version 2.13
    ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    ata_piix 0000:00:1f.2: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
    ata2.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B103, max UDMA/33
    ata1.00: ATA-6: FUJITSU MHV2060AH, 00000096, max UDMA/100
    ata1.00: 117210240 sectors, multi 8: LBA 
    ata1.00: applying bridge limits
    ata2.00: configured for UDMA/33
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCC4244 B103 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
     sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
     sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    EXT3-fs (sda3): mounted filesystem with writeback data mode
    kjournald starting.  Commit interval 5 seconds
    rtc_cmos 00:06: RTC can wake from S4
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 151
    Linux agpgart interface v0.103
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    intel_rng: FWH not detected
    usbcore: registered new device driver usb
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input2
    ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
    [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    input: PC Speaker as /devices/platform/pcspkr/input/input3
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM] (35 C)
    ACPI: AC Adapter [AC] (on-line)
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
    ACPI: Power Button [PBTN]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
    ACPI: Sleep Button [SBTN]
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    agpgart-intel 0000:00:00.0: Intel 915GM Chipset
    agpgart-intel 0000:00:00.0: detected 7932K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    iTCO_vendor_support: vendor-support=0
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.3: setting latency timer to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 1-8: new high speed USB device using ehci_hcd and address 2
    ACPI: Battery Slot [BAT0] (battery present)
    yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0188]
    input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
    yenta_cardbus 0000:03:01.0: Socket status: 30000006
    pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
    yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
    cfg80211: Calling CRDA to update world regulatory domain
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
    iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    firewire_ohci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    Initializing USB Mass Storage driver...
    scsi2 : usb-storage 1-8:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    ieee80211: 802.11 data/management/control stack, git-1.1.13
    ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
    firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
    b44 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
    ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
    ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
    ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
    b44.c:v2.0
    sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 17)
    sdhci-pci 0000:03:01.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
    eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:14:22:e6:ad:16
    [drm] Initialized drm 1.1.0 20060810
    ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    ipw2200: Copyright(c) 2003-2006 Intel Corporation
    ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
    Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    MC'97 1 converters and GPIO not ready (0xff00)
    Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Intel ICH 0000:00:1e.2: setting latency timer to 64
    firewire_core: created device fw0: GUID 344fc00021b78d21, S400
    ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
    intel8x0_measure_ac97_clock: measured 52340 usecs (2522 samples)
    intel8x0: clocking to 48000
    i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    i915 0000:00:02.0: setting latency timer to 64
    [drm] set up 7M of stolen space
    composite sync not supported
    [drm] initialized overlay support
    composite sync not supported
    Console: switching to colour frame buffer device 160x50
    fb0: inteldrmfb frame buffer device
    registered panic notifier
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    EXT3-fs (sda3): using internal journal
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs (sda4): using internal journal
    EXT3-fs (sda4): mounted filesystem with writeback data mode
    Adding 1052248k swap on /dev/sda2.  Priority:-1 extents:1 across:1052248k 
    scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer           1.02 PQ: 0 ANSI: 2
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    sd 2:0:0:0: [sdb] 7813120 512-byte logical blocks: (4.00 GB/3.72 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
     sdb: sdb1
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    lib80211_crypt: registered algorithm 'WEP'

  6. #16
    Just Joined!
    Join Date
    Jan 2011
    Posts
    9
    Does this help at all? :\

    EDIT: I got it working, I am an idiot, I never put the drivers in the modules section of rc.conf, sorry for all the trouble.. Thank you for all the help.
    Last edited by tethyrian; 01-21-2011 at 01:12 AM.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •