Results 1 to 3 of 3
So I started out trying to sync pacman, but that didnt work. I then tried to ping a website... That didn't work. I then read a bit online, opened my ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 08-23-2011 #1
- Join Date
- Aug 2011
Network Problems (Resolv.conf empty)
So I started out trying to sync pacman, but that didnt work. I then tried to ping a website... That didn't work. I then read a bit online, opened my resolv.conf file... All of the content (a template), was commented out. There was no data in the file at all. So... I guess I have to fill it out by hand. How can I go about doing this?
- 08-23-2011 #2
I would imagine Arch works like CRUX in that you could run as su:
# Generated by dhcpcd for interface eth0 search myisp.net nameserver 188.8.131.52 nameserver 184.108.40.206 search mynameserver nameserver 10.0.0.1
- 08-23-2011 #3
Example of network information from my /etc/rc.conf as you can see I use static IP and the router has IP 192.168.1.1
interface=eth0 address=192.168.1.2 netmask=255.255.255.0 broadcast=192.168.1.255 gateway=192.168.1.1