Hi, here is the bootinfoscript run again... I temporarily installed windows bootloader for using my system...
sdc is the pendrive...
Code:Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub Legacy
Boot sector info: Grub Legacy (v0.97) is installed in the boot sector
of sda5 and looks at sector 433130829 of the same hard
drive for the stage2 file. A stage2 file is at this
location on /dev/sda. Stage2 looks on partition #7
for /boot/grub/menu.lst.
Operating System:
Boot files: /grub/grub.cfg
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: Grub Legacy
Boot sector info: Grub Legacy (v0.97) is installed in the boot sector
of sda7 and looks at sector 433130829 of the same hard
drive for the stage2 file. A stage2 file is at this
location on /dev/sda. Stage2 looks on partition #7
for /boot/grub/menu.lst.
Operating System: Arch Linux ()
Boot files: /boot/grub/grub.cfg /etc/fstab
sda8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdc: ___________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 122,879,999 122,673,152 7 NTFS / exFAT / HPFS
/dev/sda3 122,880,000 409,599,999 286,720,000 7 NTFS / exFAT / HPFS
/dev/sda4 409,600,000 488,397,167 78,797,168 5 Extended
/dev/sda5 * 409,600,063 409,889,169 289,107 83 Linux
/dev/sda6 409,889,233 411,881,229 1,991,997 82 Linux swap / Solaris
/dev/sda7 411,881,293 441,874,584 29,993,292 83 Linux
/dev/sda8 441,874,648 461,875,509 20,000,862 83 Linux
/dev/sda9 461,875,573 488,397,167 26,521,595 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop100 squashfs
/dev/loop101 c5cde46a-6ce5-4d67-88b7-b174c00518f1 ext4
/dev/loop102 c5cde46a-6ce5-4d67-88b7-b174c00518f1 ext4
/dev/loop103 squashfs
/dev/loop104 10253631-26b0-431b-ba1c-b53a50f94b17 ext4
/dev/loop106 squashfs
/dev/loop107 f37332e5-1216-4775-9ce6-1d0b69ffeeaf ext4
/dev/loop109 squashfs
/dev/loop110 squashfs
/dev/mapper/arch_lib-modules 10253631-26b0-431b-ba1c-b53a50f94b17 ext4
/dev/mapper/arch_root-image c5cde46a-6ce5-4d67-88b7-b174c00518f1 ext4
/dev/mapper/arch_usr-share f37332e5-1216-4775-9ce6-1d0b69ffeeaf ext4
/dev/sda1 BCCEB8C3CEB8776C ntfs System Reserved
/dev/sda2 A632CE3732CE0C6D ntfs Windows
/dev/sda3 A6D060A8D0608103 ntfs Stuff
/dev/sda5 b3d7f31e-7f0c-42a1-86cc-60902c8d691d ext4
/dev/sda6 cdb3bcaf-bc79-4481-a77d-86e77a2132fb swap
/dev/sda7 0297b703-fadd-405b-9b1d-670e6c5f018d ext4
/dev/sda8 61390451-78c6-4db1-9a0b-d166873a4487 ext4
/dev/sda9 9beac6df-1556-49c1-87ed-9032f84d887b ext4
/dev/sdc 0E7F-EA43 vfat ARCHER
========================= "ls -R /dev/mapper/" output: =========================
/dev/mapper:
arch_lib-modules
arch_root-image
arch_usr-share
control
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/disk/by-label/ARCH_201108 /bootmnt udf (ro,relatime,utf8)
/dev/loop109 /repo/core/x86_64 squashfs (ro,relatime)
/dev/loop110 /repo/core/any squashfs (ro,relatime)
/dev/mapper/arch_lib-modules /lib/modules ext4 (rw,relatime,user_xattr,acl,barrier=1)
/dev/mapper/arch_root-image / ext4 (rw,relatime,user_xattr,acl,barrier=1)
/dev/mapper/arch_usr-share /usr/share ext4 (rw,relatime,user_xattr,acl,barrier=1)
/dev/sdc /mnt/pen vfat (rw)
============================= sda5/grub/grub.cfg: ==============================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root 0297b703-fadd-405b-9b1d-670e6c5f018d
else
search --no-floppy --fs-uuid --set=root 0297b703-fadd-405b-9b1d-670e6c5f018d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
195.323730946 = 209.727259136 boot/grub/stage2 1
195.323324680 = 209.726822912 grub/grub.cfg 1
195.320728779 = 209.724035584 grub/stage2 1
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0297b703-fadd-405b-9b1d-670e6c5f018d
else
search --no-floppy --fs-uuid --set=root 0297b703-fadd-405b-9b1d-670e6c5f018d
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0297b703-fadd-405b-9b1d-670e6c5f018d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0297b703-fadd-405b-9b1d-670e6c5f018d
else
search --no-floppy --fs-uuid --set=root 0297b703-fadd-405b-9b1d-670e6c5f018d
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0297b703-fadd-405b-9b1d-670e6c5f018d ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0297b703-fadd-405b-9b1d-670e6c5f018d' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7 0297b703-fadd-405b-9b1d-670e6c5f018d
else
search --no-floppy --fs-uuid --set=root 0297b703-fadd-405b-9b1d-670e6c5f018d
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0297b703-fadd-405b-9b1d-670e6c5f018d ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BCCEB8C3CEB8776C' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 BCCEB8C3CEB8776C
else
search --no-floppy --fs-uuid --set=root BCCEB8C3CEB8776C
fi
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
# UUID=0297b703-fadd-405b-9b1d-670e6c5f018d
/dev/sda7 / ext4 rw,relatime,data=ordered 0 1
# UUID=9beac6df-1556-49c1-87ed-9032f84d887b
/dev/sda9 /home ext4 rw,relatime,data=ordered 0 2
# UUID=61390451-78c6-4db1-9a0b-d166873a4487
/dev/sda8 /var ext4 rw,relatime,data=ordered 0 2
# UUID=cdb3bcaf-bc79-4481-a77d-86e77a2132fb
none swap defaults 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
200.630785465 = 215.425665536 boot/grub/grub.cfg 1
206.533010960 = 221.763131904 boot/grub/stage2 1
196.622633457 = 211.121945088 boot/initramfs-linux-fallback.img 1
196.584707737 = 211.081222656 boot/initramfs-linux.img 2
206.531950474 = 221.761993216 boot/vmlinuz-linux 1
========= Devices which don't seem to have a corresponding hard drive: =========
sdb
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
