Post your Conky or Applets with screenshots 2011

**MikeTbob** · 02-23-2011

Hey everyone, if you would like to share or just brag about your Conky, grellm, Apps and or just simple screen shots, this is the place for them.
I'll include a link to our last conky/screen shot thread here.
http://www.linuxforums.org/forum/cof...reenshots.html
If you need help uploading images to Linuxforums.org. here is another link that should help.
http://www.linuxforums.org/forum/lin...orums-org.html

So come on everyone, let us see your latest and greatest Desktops!
I stole one from Elijah awhile back and I like it, so I have been with it for awhile now.
Whole Desktop is KDE-4.6.0 on Gentoo Linux

Just Conky

.conkyrc

Code:

# Create own window instead of using desktop (required in nautilus)
own_window yes
#own_window_type override
own_window_transparent no
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
shadecolor #333333


# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
 
# fiddle with window
use_spacer right

# Use Xft?
use_xft yes
xftfont DejaVu Sans:size=8
xftalpha 0.8
text_buffer_size 2048
 
# Update interval in seconds
update_interval 3.0
 
# Minimum size of text area
# minimum_size 250 5
 
# Draw shades?
draw_shades yes
 
# Text stuff
draw_outline no # amplifies text if yes
draw_borders no
uppercase no # set to yes if you want all text to be in uppercase
 
# Stippled borders?
stippled_borders 3
 
# border margins
border_margin 9
 
# border width
border_width 10
 
# Default colors and also border colors, grey90 == #e5e5e5
default_color darkgrey
 
own_window_colour brown
own_window_transparent yes
 
# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right
 
# Gap between borders of screen and text
gap_x 10
gap_y 10
 
# stuff after 'TEXT' will be formatted on screen
 
TEXT
$color
${color #6666CC}SYSTEM ${hr 2}$color
$nodename $sysname $kernel on $machine
 
${color #6666CC}CPU ${hr 2}$color
${freq}MHz   Load: ${loadavg}   Temp: ${acpitemp}
$cpubar
${cpugraph 000000 ffffff}
NAME             PID       CPU%      MEM%
${top name 1} ${top pid 1}   ${top cpu 1}    ${top mem 1}
${top name 2} ${top pid 2}   ${top cpu 2}    ${top mem 2}
${top name 3} ${top pid 3}   ${top cpu 3}    ${top mem 3}
${top name 4} ${top pid 4}   ${top cpu 4}    ${top mem 4}
${top name 5} ${top pid 5}   ${top cpu 5}    ${top mem 5}
 
${color #6666CC}MEMORY / DISK ${hr 2}$color
RAM:   $memperc%   ${membar 6}$color
Swap:  $swapperc%   ${swapbar 6}$color
 
Root:  ${fs_free_perc /}%   ${fs_bar 6 /}$color 
sda2:  ${fs_free_perc /dev/sda2}%   ${fs_bar 6 /dev/sda2}$color
 
${color #6666CC}NETWORK (${addr wlan0}) ${hr 2}$color
Signal: $color${wireless_link_qual wlan0} / $color${wireless_link_qual_max wlan0}
Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s
${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 
25,140 000000 00ff00}$color
Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0}
${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr}
#${color #6666CC}LOGGING ${hr 2}$color
#${execi 30 tail -n3 /var/log/messages | awk '{print " ",$5,$6,$7,$8,$9,$10}' | fold -w50}
 
${color #6666CC}FORTUNE ${hr 2}$color
${execi 120 fortune -s | fold -w50}

**rokytnji** · 02-23-2011

Just another conky I run in Acer Aspire One ZG5 running Ubuntu 10.04 Netbook edition. Don't like the Netbook Look so running straight Gnome.

Code:

# Default colors and also border colors, grey90 == #e5e5e5
default_color white

own_window_colour black


# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_type normal
own_window_transparent yes
own_window_class Conky
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text
gap_x 4

gap_y 4

# stuff after 'TEXT' will be formatted on screen


TEXT
${color }$nodename ${hr}
${color #9fb6cd}Kernel:$alignr${color }$kernel
${color #9fb6cd}UpTime: $alignr${color }$uptime
${cpugraph 20,130 000000 ffffff}
${color #9fb6cd}Load: $alignr${color }$loadavg
${color #9fb6cd}Processes: $alignr${color }$processes
${color #9fb6cd}Running: $alignr${color }$running_processes
${color #9fb6cd}Highest CPU:
${color #ddaa00} ${top name 1}$alignr${top_mem cpu 1}
${color lightgrey} ${top name 2}$alignr${top cpu 2}
${color lightgrey} ${top name 3}$alignr${top cpu 3}
${color lightgrey} ${top name 4}$alignr${top cpu 4}
${color lightgrey} ${top name 5}$alignr${top cpu 5}
${color #9fb6cd}Highest MEM:
${color #ddaa00} ${top_mem name 1}$alignr${top_mem mem 1}
${color lightgrey} ${top_mem name 2}$alignr${top_mem mem 2}
${color lightgrey} ${top_mem name 3}$alignr${top_mem mem 3}
${color lightgrey} ${top_mem name 4}$alignr${top_mem mem 4}
${color lightgrey} ${top_mem name 5}$alignr${top_mem mem 5}
${color #9fb6cd}CPU TEMP:$alignr${color}${hddtemp /dev/sda}
${color #9fb6cd}MEM: $alignr${color } $memperc% $mem/$memmax
${membar 3,100}
${color #9fb6cd}ROOT: $alignr${color }${fs_free /}/${fs_size /}
${fs_bar 3,100 /}
${color #9fb6cd}HOME: $alignr${color }${fs_free /home}/${fs_size /home}
${fs_bar 3,100 /home}
${color white}link strength: ${color white} ${wireless_link_bar 7,50 wlan0}

${color #9fb6cd}${time %a, } $alignr${color }${time %e %B %G}
${color #9fb6cd}${time %Z, }$alignr${color }${time %H:%M:%S}
${color lightgray}${execi 40000 cal}
${texeci 60 pymetar EGBB}

http://i54.tinypic.com/357k57n.jpg

Edit: Below is Puppy 5.2 using Pwidgets. A conky style monitor in Puppy Linux. Just a point and click auto config. Running Openbox with fbpanel (my custom start button) with Rox Pinboard. This is on a IBM M41 Wireless Desktop in my Motorcycle shop that is a test bed for multiple AntiX,Puppy, and whatever else strikes my fancy. Think I have 7 distros installed on it so far on 2 IDE Hardrives multibooting with Grub4dos. Fun and games.

http://i52.tinypic.com/eijiw4.jpg

**rokytnji** · 02-24-2011

This is a different conky I have configured on my IBM M41wireless motorcycle shop single core Desktop running AntiX 11 Testing. I can minimise or maximise this one from Desktop in Icewm. This install is one that I try to break to find faults before AntiX 11 goes gold. Hence the newest kernel and running Sid repos. Like I said. A testing Distro.

screenshot.jpg

Code:

# set to yes if you want Conky to be forked in the background
background yes

cpu_avg_samples 2
net_avg_samples 2

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
font 8x12
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont DejaVu Sans:size=10

own_window_transparent yes
own_window_colour black

# Text alpha when using Xft
xftalpha 0.8

#on_bottom no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1

# Create own window instead of using desktop (required in nautilus)
own_window yes

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 200 
maximum_width 200

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 0

# border margins
border_margin 15

# border width
border_width 1

# Default colors and also border colors
default_color 000000
default_shade_color black
default_outline_color green

# Text alignment, other possible values are commented
#alignment top_left
alignment top_right
#alignment middle_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

gap_x 30
gap_y 15

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer right

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description               
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                       
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM       
#                                    battery. ACPI battery number can be     
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered               
#  cached                            Amount of memory cached                 
#  color             (color)         Change drawing color to color           
#  cpu                               CPU usage in percents                   
#  cpubar            (height)        Bar that shows CPU usage, height is     
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes             
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                 
#  exec              shell command   Executes a shell command and displays   
#                                    the output in torsmo. warning: this     
#                                    takes a lot more resources than other   
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-). 
#  execi             interval, shell Same as exec but with specific interval.
#                    command         Interval can't be less than             
#                                    update_interval in configuration.       
#  fs_bar            (height), (fs)  Bar that shows how much space is used on
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file     
#                                    system.                                 
#  fs_free           (fs)            Free space on a file system available   
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.             
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C 
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp
#                                    meaning temperature. n is number of the 
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example               
#  mails                             Mail count in mail spool. You can use   
#                                    program like fetchmail to get mails from
#                                    some server using your favourite         
#                                    protocol. See also new_mails.           
#  mem                               Amount of memory in use                 
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use             
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before
#                                    torsmo displays anything and puts output
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),       
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line       
#                    (height)       
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                   
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use               
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't
#                                    seem to be a way to know how many times 
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow
#  updates                           Number of updates (for debugging)       
#  upspeed           net             Upload speed in kilobytes               
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                 
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


## antiX additives examples. Add below Text##
##${color cccccc}battery: ${color cccccc}$acpiacadapter, ${battery_percent BAT1}%
##${color white}battery:${color white} ${battery}
##Witeless example##
#${color cccccc}Wireless:
#${color cccccc}essid: ${wireless_essid wlan0}
#${color cccccc}IP:${color cccccc} ${addr wlan0}
#${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0}
#${color cccccc}link strength: ${color cccccc} ${wireless_link_bar 7,50 wlan0}

# stuff after 'TEXT' will be formatted on screen

TEXT
${shadecolor a53d10}${font Swift:size=20}${color e6be6b}BIKER$font
${color e6be6b}${hr 2}$shadecolor
${font DejaVu Sans:size=14}${color ddd652}AntiX-M 8.5$font
${font DejaVu Sans:size=8}Mark Edelman
July 24, 2009$font
${color fdb341}$sysname $kernel
${color fdb341}Uptime: ${color green}$uptime
${color 000000}${hr 2}
${color red}CPU ${color ffffff}Usage: ${color red}$cpu%
${shadecolor 6B0000}${color black}${cpugraph 30,200 0000f4 f10a0a}$shadecolor
${color ffffff}Frequency: ${color gold}$freq ${color gold}MHz
${color 7091c1}RAM ${color ffffff}Usage: ${color 7091c1}$memperc%
${shadecolor 6B0000}${color black}${memgraph 30,200 f10a0a 7091c1}$shadecolor
${color 7091c1}$mem${color ffffff}/${color ffffff}$memmax
${color 7091c1}$buffers ${color 54f729} Buffered
${color 7091c1}$cached ${color d58e2b} Cached
${color orange}Swap ${color ffffff}Usage:
${color orange}$swap${color ffffff}/${color ffffff}$swapmax ${color ffffff}- ${color ffffff}$swapperc%
${color orange}$swapbar
${color ffffff}Free Space:
${color b555b2}/root:${color b555b2} ${fs_free /} ${color ffffff}= ${fs_free_perc /}%
${color b555b2}$fs_bar_free /home
${color 4ab1ab}/home:${color 4ab1ab} ${fs_free /home} ${color ffffff}= ${fs_free_perc /home}%
${color 4ab1ab}${fs_bar_free /home}
${color ffffff}Networking:
Up:${color 14f3ff}${upspeed wlan0} ${color ffffff} - Down:${color green}${downspeed wlan0}
${font DejaVuSansMono:size=8}${color ffffff}Running processes: ${color ffffff}$running_processes$font
${font DejaVuSansMono:size=8}${color ffffff}Name                ${color red}CPU%    ${color 7091c1}MEM%$font
  ${font DejaVuSansMono:size=8}${color ffffff} ${top name 1}  ${color red}${top cpu 1}  ${color 7091c1}${top mem 1}$font
    ${font DejaVuSansMono:size=8}${color ffffff} ${top name 2}  ${color red}${top cpu 2}  ${color 7091c1}${top mem 2}$font
    ${font DejaVuSansMono:size=8}${color ffffff} ${top name 3}  ${color red}${top cpu 3}  ${color 7091c1}${top mem 3}$font
${color ffffff}link strength: ${color b555b2 } ${wireless_link_bar 7,50 wlan0}
${color ffffff}${time %a %d %b %l:%M:%S%p}
${font Penguin Attack}${color b5550b}Conky ${color b5550b}$conky_version$font

**satya164** · 02-25-2011

conkyrc

Code:

# Conky settings #
background no
update_interval 1

cpu_avg_samples 2
net_avg_samples 2

override_utf8_locale yes

double_buffer yes
no_buffers yes

text_buffer_size 2048
#imlib_cache_size 0

temperature_unit fahrenheit

# Window specifications #

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below

border_inner_margin 0
border_outer_margin 0

minimum_size 200 250
maximum_width 200

alignment tr
gap_x 35
gap_y 35

# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no

# Text settings #
use_xft yes
xftfont Sans Serif:size=9
xftalpha 0.8
text_buffer_size 2048

uppercase no

temperature_unit celsius


default_color FFFFFF

# Lua Load  #
lua_load ~/.conky/clock_rings.lua
lua_draw_hook_pre clock_rings

TEXT
${voffset 8}${color FF6600}${font Sans Serif:size=16}${time %A}${font}${voffset -8}${alignr 50}${color FFFFFF}${font Sans Serif:size=38}${time %e}${font}
${color FFFFFF}${voffset -30}${color FFFFFF}${font Sans Serif:size=18}${time %b}${font}${voffset -3} ${color FFFFFF}${font Sans Serif:size=20}${time %Y}${font}${color FF6600}${hr}
${voffset 140}${font Sans Serif:size=10}${alignr}${time %H:%M}${font}${color}
Ubuntu 11.04 ${color FF6600}${hr}${color}
#${pre_exec lsb_release -ircs} ${color FF6600}${hr}${color}

Kernel: ${alignr}${kernel}
Uptime: ${alignr}${uptime}
Temperature: ${alignr}${acpitemp}°C
CPU1: ${cpu cpu1}% ${alignr}${color FF6600}${cpugraph cpu1 8,60 FF6600 FFFFFF}${color}
CPU2: ${cpu cpu2}% ${alignr}${color FF6600}${cpugraph cpu2 8,60 FF6600 FFFFFF}${color}
RAM: $memperc% ${alignr}${color FF6600}${memgraph 8,60 FF6600 FFFFFF}${color}

Top Processes ${color FF6600}${hr}${color}

${top_mem name 1}$alignr${color FF6600}${top_mem cpu 1}${color}${top_mem mem 1}
${top_mem name 2}$alignr${color FF6600}${top_mem cpu 2}${color}${top_mem mem 2}
${top_mem name 3}$alignr${color FF6600}${top_mem cpu 3}${color}${top_mem mem 3}

Now Playing ${color FF6600}${hr}${color}
${if_running banshee-1}
${scroll 50 3 ${exec banshee-1 --query-title | cut -f2- -d" "} ${color FF6600}by${color} ${exec banshee-1 --query-artist | cut -f2- -d" "} ${color FF6600}from${color} ${exec banshee-1 --query-album | cut -f2- -d" "} }${else}
Banshee Not Playing${endif}

Network Statistics ${color FF6600}${hr}${color}
${if_existing /proc/net/route wlan0}
Up: ${upspeed wlan0} kb/s ${alignr}${upspeedgraph wlan0 8,60 FF6600 FFFFFF}
Down: ${downspeed wlan0} kb/s ${alignr}${downspeedgraph wlan0 8,60 FF6600 FFFFFF}
Upload: ${alignr}${totalup wlan0}
Download: ${alignr}${totaldown wlan0}
Signal: ${wireless_link_qual wlan0}% ${alignr}${wireless_link_bar 8,60 wlan0}
IP Address: ${alignr}${addr wlan0}
${else}${if_existing /proc/net/route eth0}
Up: ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 8,60 FF6600 FFFFFF}
Down: ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 8,60 FF6600 FFFFFF}
Upload: ${alignr}${totalup eth0}
Download: ${alignr}${totaldown eth0}
IP Address: ${alignr}${addr eth0}
${endif}${else}${if_existing /proc/net/route eth1}
Up: ${upspeed eth1} kb/s ${alignr}${upspeedgraph eth1 8,60 FF6600 FFFFFF}
Down: ${downspeed eth1} kb/s ${alignr}${downspeedgraph eth1 8,60 FF6600 FFFFFF}
Upload: ${alignr}${totalup eth1}
Download: ${alignr}${totaldown eth1}
IP Address: ${alignr}${addr eth1}
${endif}${else}
Network Unavailable

Code for Conky Lua

Code:

--[[
This script draws percentage meters as rings, and also draws clock hands if you want! It is fully customisable; all options are described in the script. This script is based off a combination of my clock.lua script and my rings.lua script.

IMPORTANT: if you are using the 'cpu' function, it will cause a segmentation fault if it tries to draw a ring straight away. The if statement on line 145 uses a delay to make sure that this doesn't happen. It calculates the length of the delay by the number of updates since Conky started. Generally, a value of 5s is long enough, so if you update Conky every 1s, use update_num>5 in that if statement (the default). If you only update Conky every 2s, you should change it to update_num>3; conversely if you update Conky every 0.5s, you should use update_num>10. ALSO, if you change your Conky, is it best to use "killall conky; conky" to update it, otherwise the update_num will not be reset and you will get an error.

To call this script in Conky, use the following (assuming that you save this script to ~/scripts/rings.lua):
    lua_load ~/scripts/clock_rings.lua
    lua_draw_hook_pre clock_rings
]]

settings_table = {
    {
        -- Edit this table to customise your rings.
        -- You can create more rings simply by adding more elements to settings_table.
        -- "name" is the type of stat to display; you can choose from 'cpu', 'memperc', 'fs_used_perc', 'battery_used_perc'.
        name='time',
        -- "arg" is the argument to the stat type, e.g. if in Conky you would write ${cpu cpu0}, 'cpu0' would be the argument. If you would not use an argument in the Conky variable, use ''.
        arg='%I.%M',
        -- "max" is the maximum value of the ring. If the Conky variable outputs a percentage, use 100.
        max=12,
        -- "bg_colour" is the colour of the base ring.
        bg_colour=0xffffff,
        -- "bg_alpha" is the alpha value of the base ring.
        bg_alpha=0.1,
        -- "fg_colour" is the colour of the indicator part of the ring.
        fg_colour=0xFF6600,
        -- "fg_alpha" is the alpha value of the indicator part of the ring.
        fg_alpha=0.2,
        -- "x" and "y" are the x and y coordinates of the centre of the ring, relative to the top left corner of the Conky window.
        x=100, y=150,
        -- "radius" is the radius of the ring.
        radius=50,
        -- "thickness" is the thickness of the ring, centred around the radius.
        thickness=5,
        -- "start_angle" is the starting angle of the ring, in degrees, clockwise from top. Value can be either positive or negative.
        start_angle=0,
        -- "end_angle" is the ending angle of the ring, in degrees, clockwise from top. Value can be either positive or negative, but must be larger than start_angle.
        end_angle=360
    },
    {
        name='time',
        arg='%M.%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.4,
        x=100, y=150,
        radius=56,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%S',
        max=60,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.6,
        x=100, y=150,
        radius=62,
        thickness=5,
        start_angle=0,
        end_angle=360
    },
    {
        name='time',
        arg='%d',
        max=31,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=0.8,
        x=100, y=150,
        radius=70,
        thickness=5,
        start_angle=-90,
        end_angle=90
    },
    {
        name='time',
        arg='%m',
        max=12,
        bg_colour=0xffffff,
        bg_alpha=0.1,
        fg_colour=0xFF6600,
        fg_alpha=1,
        x=100, y=150,
        radius=76,
        thickness=5,
        start_angle=-90,
        end_angle=90
    }
}

-- Use these settings to define the origin and extent of your clock.

clock_r=65

-- "clock_x" and "clock_y" are the coordinates of the centre of the clock, in pixels, from the top left of the Conky window.

clock_x=100
clock_y=150

show_seconds=true

require 'cairo'

function rgb_to_r_g_b(colour,alpha)
    return ((colour / 0x10000) % 0x100) / 255., ((colour / 0x100) % 0x100) / 255., (colour % 0x100) / 255., alpha
end

function draw_ring(cr,t,pt)
    local w,h=conky_window.width,conky_window.height
    
    local xc,yc,ring_r,ring_w,sa,ea=pt['x'],pt['y'],pt['radius'],pt['thickness'],pt['start_angle'],pt['end_angle']
    local bgc, bga, fgc, fga=pt['bg_colour'], pt['bg_alpha'], pt['fg_colour'], pt['fg_alpha']

    local angle_0=sa*(2*math.pi/360)-math.pi/2
    local angle_f=ea*(2*math.pi/360)-math.pi/2
    local t_arc=t*(angle_f-angle_0)

    -- Draw background ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_f)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(bgc,bga))
    cairo_set_line_width(cr,ring_w)
    cairo_stroke(cr)
    
    -- Draw indicator ring

    cairo_arc(cr,xc,yc,ring_r,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,rgb_to_r_g_b(fgc,fga))
    cairo_stroke(cr)        
end

function draw_clock_hands(cr,xc,yc)
    local secs,mins,hours,secs_arc,mins_arc,hours_arc
    local xh,yh,xm,ym,xs,ys
    
    secs=os.date("%S")    
    mins=os.date("%M")
    hours=os.date("%I")
        
    secs_arc=(2*math.pi/60)*secs
    mins_arc=(2*math.pi/60)*mins+secs_arc/60
    hours_arc=(2*math.pi/12)*hours+mins_arc/12
        
    -- Draw hour hand
    
    xh=xc+0.7*clock_r*math.sin(hours_arc)
    yh=yc-0.7*clock_r*math.cos(hours_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xh,yh)
    
    cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
    cairo_set_line_width(cr,5)
    cairo_set_source_rgba(cr,1.0,1.0,1.0,1.0)
    cairo_stroke(cr)
    
    -- Draw minute hand
    
    xm=xc+clock_r*math.sin(mins_arc)
    ym=yc-clock_r*math.cos(mins_arc)
    cairo_move_to(cr,xc,yc)
    cairo_line_to(cr,xm,ym)
    
    cairo_set_line_width(cr,3)
    cairo_stroke(cr)
    
    -- Draw seconds hand
    
    if show_seconds then
        xs=xc+clock_r*math.sin(secs_arc)
        ys=yc-clock_r*math.cos(secs_arc)
        cairo_move_to(cr,xc,yc)
        cairo_line_to(cr,xs,ys)
    
        cairo_set_line_width(cr,1)
        cairo_stroke(cr)
    end
end

function conky_clock_rings()
    local function setup_rings(cr,pt)
        local str=''
        local value=0
        
        str=string.format('${%s %s}',pt['name'],pt['arg'])
        str=conky_parse(str)
        
        value=tonumber(str)
        pct=value/pt['max']
        
        draw_ring(cr,pct,pt)
    end
    
    -- Check that Conky has been running for at least 5s

    if conky_window==nil then return end
    local cs=cairo_xlib_surface_create(conky_window.display,conky_window.drawable,conky_window.visual, conky_window.width,conky_window.height)
    
    local cr=cairo_create(cs)    
    
    local updates=conky_parse('${updates}')
    update_num=tonumber(updates)
    
    if update_num>5 then
        for i in pairs(settings_table) do
            setup_rings(cr,settings_table[i])
        end
    end
    
    draw_clock_hands(cr,clock_x,clock_y)
end

**rokytnji** · 03-19-2011

Simple No Nonsense white conky on IBM T23 Laptop

screenshot.jpg

Code:

#  acpifan                           ACPI fan state                           

#  acpitemp                          ACPI temperature.                        

#  adt746xcpu                        CPU temperature from therm_adt746x       

#  adt746xfan                        Fan speed from therm_adt746x             

#  battery           (num)           Remaining capasity in ACPI or APM        

#                                    battery. ACPI battery number can be      

#                                    given as argument (default is BAT0).     

#  buffers                           Amount of memory buffered                

#  cached                            Amount of memory cached                  

#  color             (color)         Change drawing color to color            

#  cpu                               CPU usage in percents                    

#  cpubar            (height)        Bar that shows CPU usage, height is      

#                                    bar's height in pixels                   

#  downspeed         net             Download speed in kilobytes              

#  downspeedf        net             Download speed in kilobytes with one     

#                                    decimal                                  

#  exec              shell command   Executes a shell command and displays    

#                                    the output in torsmo. warning: this      

#                                    takes a lot more resources than other    

#                                    variables. I'd recommend coding wanted   

#                                    behaviour in C and posting a patch :-).  

#  execi             interval, shell Same as exec but with specific interval. 

#                    command         Interval can't be less than              

#                                    update_interval in configuration.        

#  fs_bar            (height), (fs)  Bar that shows how much space is used on 

#                                    a file system. height is the height in   

#                                    pixels. fs is any file on that file      

#                                    system.                                  

#  fs_free           (fs)            Free space on a file system available    

#                                    for users.                               

#  fs_free_perc      (fs)            Free percentage of space on a file       

#                                    system available for users.              

#  fs_size           (fs)            File system size                         

#  fs_used           (fs)            File system used space                   

#  hr                (height)        Horizontal line, height is the height in 

#                                    pixels                                   

#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   

#                                    may be omitted if you have only one I2C  

#                                    device. type is either in (or vol)       

#                                    meaning voltage, fan meaning fan or temp 

#                                    meaning temperature. n is number of the  

#                                    sensor. See /sys/bus/i2c/devices/ on     

#                                    your local computer.                     

#  kernel                            Kernel version                           

#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     

#                                    minute, 2 for past 5 minutes and 3 for   

#                                    past 15 minutes.                         

#  machine                           Machine, i686 for example                

#  mails                             Mail count in mail spool. You can use    

#                                    program like fetchmail to get mails from 

#                                    some server using your favourite         

#                                    protocol. See also new_mails.            

#  mem                               Amount of memory in use                  

#  membar            (height)        Bar that shows amount of memory in use   

#  memmax                            Total amount of memory                   

#  memperc                           Percentage of memory in use              

#  new_mails                         Unread mail count in mail spool.         

#  nodename                          Hostname                                 

#  outlinecolor      (color)         Change outline color                     

#  pre_exec          shell command   Executes a shell command one time before 

#                                    torsmo displays anything and puts output 

#                                    as text.                                 

#  processes                         Total processes (sleeping and running)   

#  running_processes                 Running processes (not sleeping),        

#                                    requires Linux 2.6                       

#  shadecolor        (color)         Change shading color                     

#  stippled_hr       (space),        Stippled (dashed) horizontal line        

#                    (height)        

#  swapbar           (height)        Bar that shows amount of swap in use     

#  swap                              Amount of swap in use                    

#  swapmax                           Total amount of swap                     

#  swapperc                          Percentage of swap in use                

#  sysname                           System name, Linux for example           

#  time              (format)        Local time, see man strftime to get more 

#                                    information about format                 

#  totaldown         net             Total download, overflows at 4 GB on     

#                                    Linux with 32-bit arch and there doesn't 

#                                    seem to be a way to know how many times  

#                                    it has already done that before torsmo   

#                                    has started.                             

#  totalup           net             Total upload, this one too, may overflow 

#  updates                           Number of updates (for debugging)        

#  upspeed           net             Upload speed in kilobytes                

#  upspeedf          net             Upload speed in kilobytes with one       
# stuff after 'TEXT' will be formatted on screen
##TEXT

background yes
use_xft yes
xftfont Sans:size=8
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 200 200
maximum_width 200
draw_shades yes
draw_outline no
draw_borders no
draw_graph_borders yes
default_color white
default_shade_color black
default_outline_color white
#alignment top_right
alignment top_left
gap_x 12
gap_y 12
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no

TEXT
BIKER
${font sans-serif:bold:size=8}SYSTEM ${hr 2}
${font sans-serif:normal:size=8}$sysname $kernel $alignr $machine
Host:$alignr$nodename
Uptime:$alignr$uptime
File System: $alignr${fs_type}

Battery: ${battery_bar 8,44 BAT0} 
TEMP:  ${acpitemp}c
${font sans-serif:bold:size=8}PROCESSORS ${hr 2}
${font sans-serif:normal:size=8}${cpugraph cpu1}
CPU1: ${cpu cpu1}% ${cpubar cpu1}

${font sans-serif:bold:size=8}MEMORY ${hr 2}
${font sans-serif:normal:size=8}RAM $alignc $mem / $memmax $alignr $memperc%
$membar

${font sans-serif:bold:size=8}DISKS ${hr 2}
${font sans-serif:normal:size=8}/ $alignc ${fs_used /} / ${fs_size /} $alignr ${fs_used_perc /}%
${fs_bar /}
${font sans-serif:normal:size=8}/home $alignc ${fs_used /home} / ${fs_size /home} $alignr ${fs_used_perc /home}%
${fs_bar /home}
SWAP $alignc ${swap} / ${swapmax} $alignr ${swapperc}%
${swapbar}

${font sans-serif:bold:size=8}TOP PROCESSES ${hr 2}
${font sans-serif:normal:size=8}${top_mem name 1}${alignr}${top mem 1} %
${top_mem name 2}${alignr}${top mem 2} %
$font${top_mem name 3}${alignr}${top mem 3} %
$font${top_mem name 4}${alignr}${top mem 4} %
$font${top_mem name 5}${alignr}${top mem 5} %

${font sans-serif:bold:size=8}NETWORK ${hr 2}
${font sans-serif:normal:size=8}IP address: $alignr ${addr wlan0}
ESSID: $alignr ${wireless_essid wlan0}
Connection quality: $alignr ${wireless_link_qual_perc wlan0}%
${downspeedgraph wlan0}
DLS:${downspeed ath0} kb/s $alignr total: ${totaldown wlan0}
${upspeedgraph wlan0}
ULS:${upspeed wlan0} kb/s $alignr total: ${totalup wlan0}

**rokytnji** · 05-27-2011

Simple conky.rc on my newly acquired Amrel RT 786 Laptop running AntiX i686 core with LXDE Desktop. This is a fanless Military Grade Tough Book with a 1.6 ghz pentium m, 512MB ram, 30 gig IDE drive, wireless,dual Batteries. Quick swap drive bays (cdrom,cdrw,floppy,hardrive caddies).

Code:

~$ inxi -Fr
System:    Host Biker Kernel 2.6.38-7.dmz.1-liquorix-686 i686 (32 bit) 
           Desktop LXDE (Openbox 3.4.11.1) Distro antiX-core-686-a1 20 June 2010
CPU:       Single core Intel Pentium M (-UP-) cache 2048 KB flags (sse sse2) bmips 3189.67 clocked at 1594.835 MHz 
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device bus-ID: 00:02.0 
           X.Org 1.10.1 driver intel (loaded) Resolution 1024x768@60.0hz 
           GLX Renderer Mesa DRI Intel 852GM/855GM x86/MMX/SSE2 GLX Version 1.3 Mesa 7.10.2 Direct Rendering Yes
Audio:     Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver Intel ICH ports 1c00 18c0 bus-ID: 00:1f.5
           Sound: Advanced Linux Sound Architecture Version 1.0.23
Network:   Card-1 Realtek RTL-8139/8139C/8139C+ driver 8139too v: 0.9.28 port 2000 bus-ID: 02:09.0
           IF: eth1 state: down speed: N/A duplex: N/A mac: 00:e0:4d:77:2c:76
           Card-2 Atheros Atheros AR5001X+ Wireless Network Adapter driver ath5k bus-ID: 03:00.0
           IF: wlan0 state: up mac: 00:0b:a2:1c:eb:8f
Disks:     HDD Total Size: 30.0GB (8.8% used) 1: /dev/sda IC25N030ATCS04 30.0GB 
Partition: ID:/ size: 17G used: 2.4G (15%) fs: ext3 ID:swap-1 size: 0.58GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 42.0C mobo: N/A 
           Fan Speeds (in rpm): cpu: N/A 
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://ftp.us.debian.org/debian/ testing main contrib non-free
           deb http://security.debian.org/ testing/updates main contrib non-free
           deb http://www.debian-multimedia.org testing main non-free
           deb http://apt.progchild.de stable main
           deb http://liquorix.net/debian/ sid main
           deb http://ftp.belnet.be/mirror/liquorix.net/debian sid main
Info:      Processes 82 Uptime 2:32 Memory 154.7/492.4MB Runlevel 5 Client Shell inxi 1.5.6

Conky (Biker)_001.jpg

Uploaded with ImageShack.us

Code:

# set to yes if you want Conky to be forked in the background
background yes

cpu_avg_samples 2
net_avg_samples 2

out_to_console no

# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
 font 8x12
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1

# Use Xft?
use_xft yes

# Xft font when Xft is enabled
xftfont gentium:size=10

own_window_transparent yes
own_window_colour hotpink
own_window_type desktop

# Create own window instead of using desktop (required in nautilus, pcmanfm and rox desktops)
own_window yes

# Text alpha when using Xft
xftalpha 0.8

#on_bottom no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 1

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 5 5
maximum_width 200

# Draw shades?
draw_shades no

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 0

# border margins
#border_margin 10

# border width
border_width 2

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white

# Text alignment, other possible values are commented
alignment top_left
#alignment top_right
#alignment bottom_left
#alignment bottom_right

# Gap between borders of screen and text

gap_x 10
gap_y 59

# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer right

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# boinc (seti) dir
# seti_dir /opt/seti

# Possible variables to be used:
#
#      Variable         Arguments                  Description                
#  acpiacadapter                     ACPI ac adapter state.                   
#  acpifan                           ACPI fan state                           
#  acpitemp                          ACPI temperature.                        
#  adt746xcpu                        CPU temperature from therm_adt746x       
#  adt746xfan                        Fan speed from therm_adt746x             
#  battery           (num)           Remaining capasity in ACPI or APM        
#                                    battery. ACPI battery number can be      
#                                    given as argument (default is BAT0).     
#  buffers                           Amount of memory buffered                
#  cached                            Amount of memory cached                  
#  color             (color)         Change drawing color to color            
#  cpu                               CPU usage in percents                    
#  cpubar            (height)        Bar that shows CPU usage, height is      
#                                    bar's height in pixels                   
#  downspeed         net             Download speed in kilobytes              
#  downspeedf        net             Download speed in kilobytes with one     
#                                    decimal                                  
#  exec              shell command   Executes a shell command and displays    
#                                    the output in torsmo. warning: this      
#                                    takes a lot more resources than other    
#                                    variables. I'd recommend coding wanted   
#                                    behaviour in C and posting a patch :-).  
#  execi             interval, shell Same as exec but with specific interval. 
#                    command         Interval can't be less than              
#                                    update_interval in configuration.        
#  fs_bar            (height), (fs)  Bar that shows how much space is used on 
#                                    a file system. height is the height in   
#                                    pixels. fs is any file on that file      
#                                    system.                                  
#  fs_free           (fs)            Free space on a file system available    
#                                    for users.                               
#  fs_free_perc      (fs)            Free percentage of space on a file       
#                                    system available for users.              
#  fs_size           (fs)            File system size                         
#  fs_used           (fs)            File system used space                   
#  hr                (height)        Horizontal line, height is the height in 
#                                    pixels                                   
#  i2c               (dev), type, n  I2C sensor from sysfs (Linux 2.6). dev   
#                                    may be omitted if you have only one I2C  
#                                    device. type is either in (or vol)       
#                                    meaning voltage, fan meaning fan or temp 
#                                    meaning temperature. n is number of the  
#                                    sensor. See /sys/bus/i2c/devices/ on     
#                                    your local computer.                     
#  kernel                            Kernel version                           
#  loadavg           (1), (2), (3)   System load average, 1 is for past 1     
#                                    minute, 2 for past 5 minutes and 3 for   
#                                    past 15 minutes.                         
#  machine                           Machine, i686 for example                
#  mails                             Mail count in mail spool. You can use    
#                                    program like fetchmail to get mails from 
#                                    some server using your favourite         
#                                    protocol. See also new_mails.            
#  mem                               Amount of memory in use                  
#  membar            (height)        Bar that shows amount of memory in use   
#  memmax                            Total amount of memory                   
#  memperc                           Percentage of memory in use              
#  new_mails                         Unread mail count in mail spool.         
#  nodename                          Hostname                                 
#  outlinecolor      (color)         Change outline color                     
#  pre_exec          shell command   Executes a shell command one time before 
#                                    torsmo displays anything and puts output 
#                                    as text.                                 
#  processes                         Total processes (sleeping and running)   
#  running_processes                 Running processes (not sleeping),        
#                                    requires Linux 2.6                       
#  shadecolor        (color)         Change shading color                     
#  stippled_hr       (space),        Stippled (dashed) horizontal line        
#                    (height)        
#  swapbar           (height)        Bar that shows amount of swap in use     
#  swap                              Amount of swap in use                    
#  swapmax                           Total amount of swap                     
#  swapperc                          Percentage of swap in use                
#  sysname                           System name, Linux for example           
#  time              (format)        Local time, see man strftime to get more 
#                                    information about format                 
#  totaldown         net             Total download, overflows at 4 GB on     
#                                    Linux with 32-bit arch and there doesn't 
#                                    seem to be a way to know how many times  
#                                    it has already done that before torsmo   
#                                    has started.                             
#  totalup           net             Total upload, this one too, may overflow 
#  updates                           Number of updates (for debugging)        
#  upspeed           net             Upload speed in kilobytes                
#  upspeedf          net             Upload speed in kilobytes with one       
#                                    decimal                                  
#  uptime                            Uptime                                   
#  uptime_short                      Uptime in a shorter format               
#
#  seti_prog                         Seti@home current progress
#  seti_progbar      (height)        Seti@home current progress bar
#  seti_credit                       Seti@hoome total user credit


## antiX additives examples. Add below Text##
##${color cccccc}battery: ${color cccccc}$acpiacadapter, ${battery_percent BAT1}% 
##${color}battery:${color} ${battery}
##Witeless example##
#${color cccccc}Wireless:
#${color cccccc}essid: ${wireless_essid wlan0}
#${color cccccc}IP:${color cccccc} ${addr wlan0}
#${color cccccc}speed: ${color cccccc} ${wireless_bitrate wlan0}
#${color cccccc}link strength: ${color cccccc} ${wireless_link_bar 7,50 wlan0}

# stuff after 'TEXT' will be formatted on screen

TEXT
${color}antiX-core
${color}$sysname $kernel
${color}Uptime: $uptime
${color}${time %a %d %b %k:%M}

${color}Monitors:
${color}cpu: ${color}${cpu}%
${color}ram : ${color}$mem${color}/${color}$memmax ${color}- ${color}$memperc%
${color}swap: ${color}$swap${color}/${color}$swapmax ${color}- ${color}$swapperc%
${color}processes: ${color}$processes  ${color}running: ${color}$running_processes
${color}link strength: ${color} ${wireless_link_bar 7,50 wlan0}
${color}Space:
${color}Root:${color} ${fs_free /} ${color}= ${fs_free_perc /}%
${color}/data:${color} ${fs_free /mnt/sda1} ${color}= ${fs_free_perc /mnt/sda1}%
${color}Bat 1:  ${battery_percent BAT1}%
${color}Bat 2:  ${battery_percent BAT2}%
${color}Temp: ${color} ${hwmon 0 temp 1}C

**MikeTbob** · 05-28-2011

Nice!
You always find the hottest chics Roky, my wife would skin me alive if I tried that.

**rokytnji** · 05-28-2011

LOL.

My wife asked. " Who's that chick!"

I replied. " Take it easy. I'm trying to read the tattoo on her arm and I like the bike and shop".

Misdirection works really good on my lil green-eyed redhead who knows that I love her still.

**rokytnji** · 10-29-2011

Too many beers so I had to delete this in screenshot thread. Meant to post this here.

Code:

# .conkyrc
##############################################
background yes
use_xft yes
xftfont sans:size=9
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 250 
maximum_width 250
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
default_color 90c9fb
default_shade_color 000000
default_outline_color d9d7d6
alignment top_right
gap_x 15
gap_y 37
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no
##############################################
#  Output
##############################################
TEXT              

               _____ ${font sans:bold:size=9}up ${color #11a9c8}${font sans:size=9}${alignr}$uptime${color #90c9fb}
              |_____ ${font sans:bold:size=9}temp ${color #11a9c8}${font sans:size=9}${alignr}$acpitemp C${color #90c9fb}
              |_____ ${font sans:bold:size=9}cpu ${color #11a9c8}${font sans:size=9}${alignr}${cpu cpu0} %${color #90c9fb}
              |_____ ${font sans:bold:size=9}Up:${upspeed eth0} - Down:${downspeed eth0}
              |____${font sans:bold:size=9}ram ${font sans:size=9}$memperc % $membar ${color #11a9c8}
              |____$sysname $kernel 
              |___ ${top_mem name 1}$alignr${top_mem mem 1} %
              |___ ${top_mem name 2}$alignr${top_mem mem 2} %
              |___ ${top_mem name 3}$alignr${top_mem mem 3} %
              |___ ${top_mem name 4}$alignr${top_mem mem 4} %
              |___ ${top_mem name 5}$alignr${top_mem mem 5} %
              |___ ${top_mem name 6}$alignr${top_mem mem 6} %
              |___ ${top_mem name 7}$alignr${top_mem mem 7} %
              |____${color}${font Swift:size=20}${color}BIKER$font
              |____${color}${time %a %d %b %l:%M:%S%p}
              |____${color 11a9c8}/root:${color 11a9c8} ${fs_free /} ${color 11a9c8}= ${fs_free_perc /}%

***elija*** · 11-01-2011

Been trying out CrunchBang and have modified the conky. This is what I have come up with...

Code:

# conky configuration
#
# The list of variables has been removed from this file in favour
# of keeping the documentation more maintainable.
# Check http://conky.sf.net for an up-to-date-list.
#
# For ideas about how to modify conky, please see:
# http://crunchbanglinux.org/forums/topic/59/my-conky-config/
#
# For help with conky, please see:
# http://crunchbanglinux.org/forums/topic/2047/conky-help/
#
# Enjoy! :)
##############################################
#  Settings
##############################################
background yes
use_xft yes
xftfont sans:size=9
xftalpha 1
update_interval 1.0
total_run_times 0
own_window yes
own_window_transparent yes
own_window_type desktop
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
minimum_size 200 200
maximum_width 240
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders yes
default_color d8d8d8
default_shade_color 000000
default_outline_color d9d7d6
alignment top_right
gap_x 12
gap_y 24
no_buffers yes
uppercase no
cpu_avg_samples 2
override_utf8_locale no
##############################################
#  Output
##############################################
TEXT
S Y S T E M    I N F O
${hr}
Host:$alignr$nodename
Uptime:$alignr$uptime
RAM:$alignr$mem/$memmax
Swap usage:$alignr$swap/$swapmax
Disk usage:$alignr${fs_used /}/${fs_size /}


C P U
${hr}
Usage:$alignr${cpu cpu0}%
Temp:$alignr${acpitemp}${iconv_start UTF-8 ISO_8859-1}°${iconv_stop}
Load:${alignr}${loadavg}
Frequency:$alignr${freq}MHz 
$cpubar


W I R E L E S S 
${hr}
Signal:${alignr}${wireless_link_qual wlan0} / $color${wireless_link_qual_max wlan0}
Down:${alignr}${downspeed wlan0} k/s
Up:${alignr}${upspeed wlan0} k/s
${downspeedgraph wlan0 25,120 000000 ff0000} ${alignr}${upspeedgraph wlan0 
25,120 000000 00ff00}$color
Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0}


S H O R T C U T    K E Y S
${hr}
Alt+F2$alignr Run Dialog
Alt+F3$alignr Alt Menu
Super+Space$alignr Main Menu
Super+Tab$alignr Client Menu
Super+t$alignr Terminal
Super+f$alignr File Manager
Super+e$alignr Editor
Super+m$alignr Media Player
Super+w$alignr Web Browser
Super+l$alignr Lock Screen
Super+v$alignr Volume Control
Super+x$alignr Logout
PrtSc$alignr Screenshot

Thread Tools

Display

Post your Conky or Applets with screenshots 2011

Yeah, it came up.

OOOOOPs

Posting Permissions