[SOLVED] Help with Fuji Finepix J38

**devianpctek** · 07-20-2010

Hi guys I'm having a problem since this camera isn't "supported" I googled for similar problem but no luck I want to get the pictures out of it, it uses SDHC and my reader doesn't support that format so the only way is through usb but i cant get it to be recognize
I dont know if this is useful but heres the output of some commands i think you'll need to help me
I appreciate any help you can give thanks

mount

Code:

    /dev/sda6 on / type ext3 (rw,errors=remount-ro)
    tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
    proc on /proc type proc (rw,noexec,nosuid,nodev)
    sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
    udev on /dev type tmpfs (rw,mode=0755)
    tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
    devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
    /dev/sda1 on /home type ext3 (rw)
    fusectl on /sys/fs/fuse/connections type fusectl (rw)
    gvfs-fuse-daemon on /home/devian/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=devian)

fdisk

Code:

    Disk /dev/sdb: 80.0 GB, 80025280000 bytes
    255 heads, 63 sectors/track, 9729 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00070513

       Device Boot      Start         End      Blocks   Id  System
    /dev/sdb1               1        9729    78148161   83  Linux

    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x76647664

       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1       12755   102453088+  83  Linux
    Partition 1 does not end on cylinder boundary.
    /dev/sda2           12756       60801   385929495    f  W95 Ext'd (LBA)
    Partition 2 does not end on cylinder boundary.
    /dev/sda5           12756       55487   343244758+   7  HPFS/NTFS
    /dev/sda6           55488       60107    37110118+  83  Linux
    /dev/sda7           60108       60801     5574523+  82  Linux swap / Solaris

lsusb

Code:

    Bus 002 Device 004: ID 04cb:01fc Fuji Photo Film Co., Ltd
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg

Code:

    usb 2-10: new full speed USB device using ohci_hcd and address 6
    usb 2-10: New USB device found, idVendor=04cb, idProduct=01fc
    usb 2-10: New USB device strings: Mfr=0, Product=2, SerialNumber=3
    usb 2-10: Product: USB PTP
    usb 2-10: SerialNumber: 592D33383131090916C6C59UE05270

**devianpctek** · 07-27-2010

Well i managed to get the camera recognize at least with one program, this is what I installed

Code:

apt-get install fbi gphoto2 digikam

now I can get my pictures from the camera but I have to run digikam as sudo but not big deal so I mark this as solved

Thread Tools

Display

[SOLVED] Help with Fuji Finepix J38

Posting Permissions