Dear all ,

i have compiled the kernel and trzing to boot my board which is giving me the below log . i have printed this log using early printk
Its printing until there and freezing.

Uncompressing Linux... done, booting the kernel.
Backtrace:
[ 0.601989] [<c0037b90>] (dump_backtrace+0x0/0x110) from [<c041824c>] (dump_stack+0x18/0x1c)
[ 0.602020] r6:c04a4976 r5:00000040 r4:df82ff40 r3:00000000
[ 0.602050] [<c0418234>] (dump_stack+0x0/0x1c) from [<c005c7e4>] (warn_slowpath_common+0x54/0x6c)
[ 0.602081] [<c005c790>] (warn_slowpath_common+0x0/0x6c) from [<c005c8a0>] (warn_slowpath_fmt+0x38/0x40)
[ 0.602081] r8:00000000 r7:c000eb94 r6:c05269d8 r5:c04a25fa r4:c0024ed4
[ 0.602111] r3:00000009
[ 0.602111] [<c005c868>] (warn_slowpath_fmt+0x0/0x40) from [<c00416d4>] (_init_omap_device+0x8c/0xac)
[ 0.602142] r3:c041cb8b r2:c04a498f
[ 0.602142] [<c0041648>] (_init_omap_device+0x0/0xac) from [<c000ebec>] (omap2_common_pm_init+0x58/0x8
[ 0.602172] r6:c0567c00 r5:c0504578 r4:c0024ed4
[ 0.602203] [<c000eb94>] (omap2_common_pm_init+0x0/0x8 from [<c002e928>] (do_one_initcall+0xc0/0x194)
[ 0.602203] [<c002e868>] (do_one_initcall+0x0/0x194) from [<c0008df0>] (kernel_init+0x158/0x220)
[ 0.602233] r8:00000000 r7:00000013 r6:c0567c00 r5:c0504578 r4:c0024ed4
[ 0.602264] [<c0008c98>] (kernel_init+0x0/0x220) from [<c005fc38>] (do_exit+0x0/0x67
[ 0.602264] r6:c005fc38 r5:c0008c98 r4:00000000 r3:00000000
[ 0.602294] ---[ end trace 1b75b31a2719ed1e ]---
[ 0.603271] I-pipe: Domain Xenomai registered.
[ 0.603332] Xenomai: hal/arm started.
[ 0.603607] Xenomai: scheduling class idle registered.
[ 0.603607] Xenomai: scheduling class rt registered.
[ 0.611083] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded.
[ 0.611114] Xenomai: debug mode enabled.
[ 0.616394] Xenomai: starting native API services.
[ 0.616394] Xenomai: starting POSIX services.
[ 0.616729] Xenomai: starting RTDM services.
[ 0.616912] Xenomai: registered exported object RN#0 (regions)
[ 0.616973] Xenomai: starting pSOS+ services.
[ 0.617187] Xenomai: registered exported object heap0 (heaps)
[ 0.617279] Xenomai: starting VRTX services.
[ 0.617370] Xenomai: starting VxWorks services.
[ 0.617431] Xenomai: starting uITRON services.
[ 0.618652] VFS: Disk quotas dquot_6.5.2
[ 0.618774] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.620056] msgmni has been set to 1003
[ 0.620727] io scheduler noop registered (default)
[ 0.620758] io scheduler deadline registered
[ 0.620941] io scheduler cfq registered
[ 0.621551] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.680603] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.810516] omap-hsuart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.888671] console [ttyO2] enabled
[ 2.040496] omap-hsuart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.201293] usbcore: registered new interface driver smsc95xx
[ 2.207336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.214385] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.220397] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.280578] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.300445] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.306549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.313629] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.321228] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.326782] usb usb1: Manufacturer: Linux 2.6.37.6 ehci_hcd
[ 2.332611] usb usb1: SerialNumber: ehci-omap.0
[ 2.338012] hub 1-0:1.0: USB hub found
[ 2.341979] hub 1-0:1.0: 3 ports detected
[ 2.370605] Initializing USB Mass Storage driver...
[ 2.375946] usbcore: registered new interface driver usb-storage
[ 2.382263] USB Mass Storage support registered.
[ 2.387268] usbcore: registered new interface driver libusual
[ 2.393310] i2c /dev entries driver
[ 2.405792] TCP cubic registered
[ 2.409179] Initializing XFRM netlink socket
[ 2.413818] NET: Registered protocol family 17
[ 2.418579] NET: Registered protocol family 15
[ 2.423309] Registering the dns_resolver key type
[ 2.428375] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 2.436737] ThumbEE CPU extension supported.
[ 2.441284] Power Management for TI OMAP4.
[ 2.445617] clock: disabling unused clocks to save power
[ 2.452606] regulator_init_complete: incomplete constraints, leaving VAUX3_6030 on
[ 2.461242] regulator_init_complete: incomplete constraints, leaving VAUX2_6030 on
[ 2.469604] regulator_init_complete: incomplete constraints, leaving VAUX1_6030 on
[ 2.477996] regulator_init_complete: incomplete constraints, leaving VUSB on
[ 2.485900] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.496795] regulator_init_complete: incomplete constraints, leaving VCXIO on
[ 2.504760] regulator_init_complete: incomplete constraints, leaving VANA on
[ 2.512664] regulator_init_complete: incomplete constraints, leaving VUSIM on
[ 2.520629] regulator_init_complete: incomplete constraints, leaving VPP on
[ 2.531433] Freeing init memory: 152K
Loading, please wait...
modprobe: FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
[ 2.580718] mmc0: host does not support reading read-only switch. assuming write-enable.

mount: mounting none on /dev failed: No such device
W: devtmpfs not available, falling back to tmpfs for /dev
[ 2.610534] mmc0: new high speed SDHC card at address e624
[ 2.616912] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[ 2.626800] mmcblk0: p1 p2
Couldn't get a file descriptor referring to the console
[ 2.660552] usb 1-1: new high speed USB device using ehci-omap and address 2
[ 2.820892] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.827911] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.838165] hub 1-1:1.0: USB hub found
[ 2.842864] hub 1-1:1.0: 5 ports detected
[ 3.120941] usb 1-1.1: new high speed USB device using ehci-omap and address 3
Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directoy
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not[ 3.251007] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
load /lib/modul[ 3.259124] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
es/2.6.37.6/modules.dep: No such file or directo[ 3.272369] smsc95xx v1.0.4
ry
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
[ 3.334838] smsc95xx 1-1.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0a:fa4
Begin: Running /scripts/local-premount ... FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or dy
done.
FATAL: Could not load /lib/modules/2.6.37[ 3.414215] EXT3-fs (mmcblk0p2): recovery required on readonly filesystem
No such file or [ 3.423309] EXT3-fs (mmcblk0p2): directory
write access will be enabled during recovery
[ 3.433197] usb 1-1.2: new low speed USB device using ehci-omap and address 4
[ 3.441650] EXT3-fs: barriers not enabled
[ 3.546875] usb 1-1.2: New USB device found, idVendor=413c, idProduct=3012
[ 3.554077] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.561859] usb 1-1.2: Product: Dell USB Optical Mouse
[ 3.567230] usb 1-1.2: Manufacturer: Dell
[ 3.643890] kjournald starting. Commit interval 5 seconds
[ 3.643951] EXT3-fs (mmcblk0p2): recovery complete
[ 3.648071] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
Begin: Running /[ 3.670776] usb 1-1.3: new low speed USB device using ehci-omap and address 5
scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 3.806610] usb 1-1.3: New USB device found, idVendor=413c, idProduct=2105
[ 3.814239] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.822052] usb 1-1.3: Product: Dell USB Keyboard
[ 3.826995] usb 1-1.3: Manufacturer: Dell
init: ureadahead main process (560) terminated with status 5
fsck from util-linux-ng 2.17.2
/dev/mmcblk0p2: clean, 117812/472352 files, 542738/949843 blocks
[ OK ]ting sensors limits
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
* PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned
[ OK ]bling additional executable binary formats binfmt-support
Begin: Loading essential drivers ... FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directoy
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or dy
done.
FATAL: Could not load /lib/modules/2.6.37.6/modules.dep: No such file or directory
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
init: ureadahead main process (560) terminated with status 5
fsck from util-linux-ng 2.17.2
/dev/mmcblk0p2: clean, 117812/472352 files, 542738/949843 blocks
[ OK ]ting sensors limits
speech-dispatcher disabled; edit /etc/default/speech-dispatcher
* PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned
[ OK ]bling additional executable binary formats binfmt-support

Iam not seeing either progrss in booting or any mesage on my terminal after this message .Its a great help to me if someone let me know the problem .