Find the answer to your Linux question:
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 27
Edit: Deleted> Enough advice has been given already....
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru rokytnji's Avatar
    Join Date
    Jul 2008
    Location
    Desert
    Posts
    4,043

    Edit: Deleted> Enough advice has been given already.
    Linux Registered User # 475019
    Lead,Follow, or get the heck out of the way. I Have a Masters in Raising Hell
    Tech Books
    Free Linux Books
    Newbie Guide
    Courses at Home

  2. #12
    Just Joined!
    Join Date
    May 2012
    Posts
    25
    For the lspci - nn comand I got:
    Code:
    00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705]
    	Subsystem: Advanced Micro Devices [AMD] Device [1022:1705]
    00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641]
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714]
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: HDA Intel
    00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709]
    	Kernel driver in use: pcieport
    00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170a]
    	Kernel driver in use: pcieport
    00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b]
    	Kernel driver in use: pcieport
    00:10.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: xhci_hcd
    00:10.1 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB XHCI Controller [1022:7812] (rev 03)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: xhci_hcd
    00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] [1022:7804]
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: ahci
    00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: ohci_hcd
    00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: ehci_hcd
    00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB OHCI Controller [1022:7807] (rev 11)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: ohci_hcd
    00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Hudson USB EHCI Controller [1022:7808] (rev 11)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: ehci_hcd
    00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Hudson SMBus Controller [1022:780b] (rev 13)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] Hudson IDE Controller [1022:780c] (rev 40)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: pata_atiixp
    00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Hudson Azalia Controller [1022:780d] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    	Kernel driver in use: HDA Intel
    00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Hudson LPC Bridge [1022:780e] (rev 11)
    	Subsystem: Hewlett-Packard Company Device [103c:358b]
    00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Hudson PCI Bridge [1022:780f] (rev 40)
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 [1022:1701]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 [1022:1702]
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 [1022:1703]
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 [1022:1704]
    00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 [1022:1718]
    00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 [1022:1716]
    00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 [1022:1719]
    01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
    	Subsystem: Hewlett-Packard Company Device [103c:1805]
    	Kernel driver in use: r8169
    02:00.0 Network controller [0280]: RaLink Device [1814:5390]
    	Subsystem: Hewlett-Packard Company Device [103c:1636]
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:1805]
    03:00.1 SD Host controller [0805]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)
    	Subsystem: Hewlett-Packard Company Device [103c:1805]
    	Kernel driver in use: sdhci-pci
    for the ismod command
    Code:
    Module                  Size  Used by
    parport_pc             18855  0 
    ppdev                   5030  0 
    lp                      7462  0 
    parport                27954  3 parport_pc,ppdev,lp
    sco                     7225  2 
    bridge                 39646  0 
    stp                     1440  1 bridge
    bnep                    9427  2 
    rfcomm                 29629  0 
    l2cap                  24752  6 bnep,rfcomm
    crc16                   1319  1 l2cap
    bluetooth              41827  6 sco,bnep,rfcomm,l2cap
    cpufreq_conservative     5162  0 
    rfkill                 13044  3 bluetooth
    cpufreq_stats           2740  0 
    cpufreq_powersave        902  0 
    cpufreq_userspace       1992  0 
    binfmt_misc             6431  1 
    uinput                  6376  1 
    fuse                   50924  1 
    ext2                   52905  1 
    loop                   11799  0 
    snd_hda_codec_idt      42513  1 
    snd_hda_codec_atihdmi     2251  1 
    snd_hda_intel          20035  1 
    snd_hda_codec          54244  3 snd_hda_codec_idt,snd_hda_codec_atihdmi,snd_hda_intel
    snd_hwdep               5380  1 snd_hda_codec
    snd_pcm                60487  2 snd_hda_intel,snd_hda_codec
    snd_seq                42881  0 
    snd_timer              15598  2 snd_pcm,snd_seq
    snd_seq_device          4493  1 snd_seq
    uvcvideo               52127  0 
    snd                    46526  10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
    soundcore               4598  1 snd
    hp_accel               11056  0 
    i2c_piix4               8328  0 
    videodev               30041  1 uvcvideo
    lis3lv02d               5173  1 hp_accel
    snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
    video                  17445  0 
    v4l1_compat            11442  2 uvcvideo,videodev
    v4l2_compat_ioctl32     8474  1 videodev
    wmi                     4323  0 
    output                  1692  1 video
    psmouse                49937  0 
    serio_raw               3752  0 
    i2c_core               15819  2 i2c_piix4,videodev
    pcspkr                  1699  0 
    input_polldev           1967  1 lis3lv02d
    evdev                   7352  15 
    button                  4650  0 
    battery                 4998  0 
    ac                      2192  0 
    processor              29935  4 
    ext3                  106710  2 
    jbd                    37317  1 ext3
    mbcache                 5050  2 ext2,ext3
    sha256_generic          8692  2 
    aes_x86_64              7340  2 
    aes_generic            25714  1 aes_x86_64
    cbc                     2539  1 
    dm_crypt               10664  1 
    dm_mod                 53946  12 dm_crypt
    sg                     24069  0 
    sd_mod                 29937  3 
    sr_mod                 12602  0 
    crc_t10dif              1276  1 sd_mod
    cdrom                  29415  1 sr_mod
    ata_generic             3239  0 
    ohci_hcd               19343  0 
    sdhci_pci               5597  0 
    sdhci                  13998  1 sdhci_pci
    pata_atiixp             3489  0 
    thermal                11674  0 
    ahci                   32870  2 
    ehci_hcd               32097  0 
    xhci                   33993  0 
    libata                133776  3 ata_generic,pata_atiixp,ahci
    usbcore               123122  5 uvcvideo,ohci_hcd,ehci_hcd,xhci
    nls_base                6377  1 usbcore
    scsi_mod              126725  4 sg,sd_mod,sr_mod,libata
    r8169                  36840  0 
    mmc_core               45702  1 sdhci
    mii                     3210  1 r8169
    led_class               2433  2 hp_accel,sdhci
    thermal_sys            11942  3 video,processor,thermal
    the dsesg command returned:
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:22:28 UTC 2012
    [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Travis-root ro quiet
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   Centaur CentaurHauls
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 00000000dfb3f000 (usable)
    [    0.000000]  BIOS-e820: 00000000dfb3f000 - 00000000dfbbf000 (reserved)
    [    0.000000]  BIOS-e820: 00000000dfbbf000 - 00000000dfebf000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
    [    0.000000]  BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
    [    0.000000]  BIOS-e820: 00000000dff00000 - 00000000e0000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [    0.000000]  BIOS-e820: 0000000100000000 - 00000001ff000000 (usable)
    [    0.000000]  BIOS-e820: 00000001ff000000 - 000000021f000000 (reserved)
    [    0.000000] DMI 2.7 present.
    [    0.000000] last_pfn = 0x1ff000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-BFFFF uncachable
    [    0.000000]   C0000-FFFFF write-through
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 0000000000 mask FF80000000 write-back
    [    0.000000]   1 base 0080000000 mask FFC0000000 write-back
    [    0.000000]   2 base 00C0000000 mask FFE0000000 write-back
    [    0.000000]   3 base 00DFEBD000 mask FFFFFFF000 uncachable
    [    0.000000]   4 base 00FFE00000 mask FFFFE00000 write-protect
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] TOM2: 000000021f000000 aka 8688M
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x400000000
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-00000000dff00000
    [    0.000000]  0000000000 - 00c0000000 page 1G
    [    0.000000]  00c0000000 - 00dfe00000 page 2M
    [    0.000000]  00dfe00000 - 00dff00000 page 4k
    [    0.000000] kernel direct mapping tables up to dff00000 @ 8000-b000
    [    0.000000] init_memory_mapping: 0000000100000000-00000001ff000000
    [    0.000000]  0100000000 - 01c0000000 page 1G
    [    0.000000]  01c0000000 - 01ff000000 page 2M
    [    0.000000] kernel direct mapping tables up to 1ff000000 @ a000-c000
    [    0.000000] RAMDISK: 37589000 - 37fef9cf
    [    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
    [    0.000000] ACPI: XSDT 00000000dfef5120 0007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
    [    0.000000] ACPI: FACP 00000000dfef4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
    [    0.000000] ACPI: DSDT 00000000dfede000 1149A (v01 HP     INSYDE   F0000000 ACPI 00040000)
    [    0.000000] ACPI: FACS 00000000dfc95000 00040
    [    0.000000] ACPI: HPET 00000000dfef3000 00038 (v01 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: APIC 00000000dfef2000 00084 (v02 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: MCFG 00000000dfef1000 0003C (v01 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: ASF! 00000000dfef0000 000A5 (v32 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: BOOT 00000000dfedd000 00028 (v01 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: SLIC 00000000dfedc000 00176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
    [    0.000000] ACPI: WDRT 00000000dfedb000 00047 (v01 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: MSDM 00000000dfeda000 00055 (v03 HP     INSYDE   00000001 ACPI 00040000)
    [    0.000000] ACPI: SSDT 00000000dfed9000 00E28 (v01 HP     INSYDE   00000001 AMD  00000001)
    [    0.000000] ACPI: SSDT 00000000dfed7000 0190A (v02 HP     INSYDE   00000001 MSFT 04000000)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-00000001ff000000
    [    0.000000] Bootmem setup node 0 0000000000000000-00000001ff000000
    [    0.000000]   NODE_DATA [000000000000b000 - 0000000000012fff]
    [    0.000000]   bootmap [0000000000013000 -  0000000000052dff] pages 40
    [    0.000000] (8 early reservations) ==> bootmem [0000000000 - 01ff000000]
    [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
    [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
    [    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS ==> [0001000000 - 00016d95c4]
    [    0.000000]   #3 [0037589000 - 0037fef9cf]          RAMDISK ==> [0037589000 - 0037fef9cf]
    [    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
    [    0.000000]   #5 [00016da000 - 00016da2c2]              BRK ==> [00016da000 - 00016da2c2]
    [    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
    [    0.000000]   #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
    [    0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
    [    0.000000]  [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff880001800000-ffff8800081fffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000000 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   0x00100000 -> 0x001ff000
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[4] active PFN ranges
    [    0.000000]     0: 0x00000000 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x000dfb3f
    [    0.000000]     0: 0x000dfef6 -> 0x000dff00
    [    0.000000]     0: 0x00100000 -> 0x001ff000
    [    0.000000] On node 0 totalpages: 1960680
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 102 pages reserved
    [    0.000000]   DMA zone: 3841 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 14280 pages used for memmap
    [    0.000000]   DMA32 zone: 897921 pages, LIFO batch:31
    [    0.000000]   Normal zone: 14280 pages used for memmap
    [    0.000000]   Normal zone: 1030200 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 24
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 00000000dfb3f000 - 00000000dfbbf000
    [    0.000000] PM: Registered nosave memory: 00000000dfbbf000 - 00000000dfebf000
    [    0.000000] PM: Registered nosave memory: 00000000dfebf000 - 00000000dfef6000
    [    0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000e0000000
    [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
    [    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [    0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
    [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
    [    0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [    0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008400000 s90328 r8192 d24360 u524288
    [    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1931962
    [    0.000000] Policy zone: Normal
    [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/Travis-root ro quiet
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    0.000000] Placing 64MB software IO TLB between ffff88000859e000 - ffff88000c59e000
    [    0.000000] software IO TLB at phys 0x859e000 - 0xc59e000
    [    0.000000] Memory: 7649640k/8372224k available (3083k kernel code, 529504k absent, 193080k reserved, 2048k data, 592k init)
    [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] NR_IRQS:4352 nr_irqs:440
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] Console: colour VGA+ 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 1497.138 MHz processor.
    [    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.27 BogoMIPS (lpj=5988544)
    [    0.008028] Security Framework initialized
    [    0.008033] SELinux:  Disabled at boot.
    [    0.008815] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [    0.011547] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.012826] Mount-cache hash table entries: 256
    [    0.012968] Initializing cgroup subsys ns
    [    0.012973] Initializing cgroup subsys cpuacct
    [    0.012977] Initializing cgroup subsys devices
    [    0.012980] Initializing cgroup subsys freezer
    [    0.012983] Initializing cgroup subsys net_cls
    [    0.013008] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.013011] CPU: L2 Cache: 1024K (64 bytes/line)
    [    0.013014] CPU 0/0x0 -> Node 0
    [    0.013016] CPU: Physical Processor ID: 0
    [    0.013018] CPU: Processor Core ID: 0
    [    0.013021] mce: CPU supports 6 MCE banks
    [    0.013032] Performance Events: AMD PMU driver.
    [    0.013037] ... version:                0
    [    0.013039] ... bit width:              48
    [    0.013041] ... generic registers:      4
    [    0.013043] ... value mask:             0000ffffffffffff
    [    0.013045] ... max period:             00007fffffffffff
    [    0.013047] ... fixed-purpose events:   0
    [    0.013049] ... event mask:             000000000000000f
    [    0.014436] ACPI: Core revision 20090903
    [    0.032094] Setting APIC routing to flat
    [    0.032443] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.073002] CPU0: AMD A8-3500M APU with Radeon(tm) HD Graphics stepping 00
    [    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
    [    0.012000] Initializing CPU#1
    [    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
    [    0.012000] CPU 1/0x1 -> Node 0
    [    0.012000] CPU: Physical Processor ID: 0
    [    0.012000] CPU: Processor Core ID: 1
    [    0.160127] CPU1: AMD A8-3500M APU with Radeon(tm) HD Graphics stepping 00
    [    0.160181] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [    0.164080] Booting processor 2 APIC 0x2 ip 0x6000
    [    0.012000] Initializing CPU#2
    [    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
    [    0.012000] CPU 2/0x2 -> Node 0
    [    0.012000] CPU: Physical Processor ID: 0
    [    0.012000] CPU: Processor Core ID: 2
    [    0.252032] CPU2: AMD A8-3500M APU with Radeon(tm) HD Graphics stepping 00
    [    0.252086] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    [    0.256074] Booting processor 3 APIC 0x3 ip 0x6000
    [    0.012000] Initializing CPU#3
    [    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [    0.012000] CPU: L2 Cache: 1024K (64 bytes/line)
    [    0.012000] CPU 3/0x3 -> Node 0
    [    0.012000] CPU: Physical Processor ID: 0
    [    0.012000] CPU: Processor Core ID: 3
    [    0.344129] CPU3: AMD A8-3500M APU with Radeon(tm) HD Graphics stepping 00
    [    0.344183] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    [    0.348014] Brought up 4 CPUs
    [    0.348018] Total of 4 processors activated (11977.63 BogoMIPS).
    [    0.348847] CPU0 attaching sched-domain:
    [    0.348854]  domain 0: span 0-3 level MC
    [    0.348857]   groups: group ffff88000840fbf0 cpus 0 group ffff88000848fbf0 cpus 1 group ffff88000850fbf0 cpus 2 group ffff88000858fbf0 cpus 3
    [    0.348870] CPU1 attaching sched-domain:
    [    0.348873]  domain 0: span 0-3 level MC
    [    0.348876]   groups: group ffff88000848fbf0 cpus 1 group ffff88000850fbf0 cpus 2 group ffff88000858fbf0 cpus 3 group ffff88000840fbf0 cpus 0
    [    0.348886] CPU2 attaching sched-domain:
    [    0.348888]  domain 0: span 0-3 level MC
    [    0.348891]   groups: group ffff88000850fbf0 cpus 2 group ffff88000858fbf0 cpus 3 group ffff88000840fbf0 cpus 0 group ffff88000848fbf0 cpus 1
    [    0.348900] CPU3 attaching sched-domain:
    [    0.348903]  domain 0: span 0-3 level MC
    [    0.348905]   groups: group ffff88000858fbf0 cpus 3 group ffff88000840fbf0 cpus 0 group ffff88000848fbf0 cpus 1 group ffff88000850fbf0 cpus 2
    [    0.349025] devtmpfs: initialized
    [    0.354496] regulator: core version 0.5
    [    0.354496] NET: Registered protocol family 16
    [    0.354496] ACPI: bus type pci registered
    [    0.354496] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
    [    0.354496] PCI: MCFG area at f8000000 reserved in E820
    [    0.359091] PCI: Using MMCONFIG at f8000000 - fbffffff
    [    0.359093] PCI: Using configuration type 1 for base access
    [    0.360035] bio: create slab <bio-0> at 0
    [    0.361208] ACPI: EC: Look up EC in DSDT
    [    0.362864] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.372911] ACPI: BIOS _OSI(Linux) query ignored
    [    0.380190] ACPI: Interpreter enabled
    [    0.380196] ACPI: (supports S0 S3 S4 S5)
    [    0.380237] ACPI: Using IOAPIC for interrupt routing
    [    0.401127] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [    0.404092] ACPI: No dock devices found.
    [    0.404571] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [    0.404669] pci 0000:00:01.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
    [    0.404676] pci 0000:00:01.0: reg 14 io port: [0x3000-0x30ff]
    [    0.404682] pci 0000:00:01.0: reg 18 32bit mmio: [0xf0300000-0xf033ffff]
    [    0.404711] pci 0000:00:01.0: supports D1 D2
    [    0.404739] pci 0000:00:01.1: reg 10 32bit mmio: [0xf0344000-0xf0347fff]
    [    0.404774] pci 0000:00:01.1: supports D1 D2
    [    0.404885] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [    0.404889] pci 0000:00:04.0: PME# disabled
    [    0.404949] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [    0.404953] pci 0000:00:05.0: PME# disabled
    [    0.405013] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [    0.405017] pci 0000:00:06.0: PME# disabled
    [    0.405157] pci 0000:00:10.0: reg 10 64bit mmio: [0xf0348000-0xf0349fff]
    [    0.405248] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [    0.405254] pci 0000:00:10.0: PME# disabled
    [    0.405348] pci 0000:00:10.1: reg 10 64bit mmio: [0xf034a000-0xf034bfff]
    [    0.405438] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
    [    0.405444] pci 0000:00:10.1: PME# disabled
    [    0.405517] pci 0000:00:11.0: reg 10 io port: [0x3138-0x313f]
    [    0.405526] pci 0000:00:11.0: reg 14 io port: [0x314c-0x314f]
    [    0.405534] pci 0000:00:11.0: reg 18 io port: [0x3130-0x3137]
    [    0.405542] pci 0000:00:11.0: reg 1c io port: [0x3148-0x314b]
    [    0.405550] pci 0000:00:11.0: reg 20 io port: [0x3110-0x311f]
    [    0.405559] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0350000-0xf03507ff]
    [    0.405621] pci 0000:00:12.0: reg 10 32bit mmio: [0xf034f000-0xf034ffff]
    [    0.405704] pci 0000:00:12.2: reg 10 32bit mmio: [0xf034e000-0xf034e0ff]
    [    0.405762] pci 0000:00:12.2: supports D1 D2
    [    0.405764] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.405770] pci 0000:00:12.2: PME# disabled
    [    0.405807] pci 0000:00:13.0: reg 10 32bit mmio: [0xf034d000-0xf034dfff]
    [    0.405890] pci 0000:00:13.2: reg 10 32bit mmio: [0xf034c000-0xf034c0ff]
    [    0.405947] pci 0000:00:13.2: supports D1 D2
    [    0.405950] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.405955] pci 0000:00:13.2: PME# disabled
    [    0.406048] pci 0000:00:14.1: reg 10 io port: [0x3128-0x312f]
    [    0.406056] pci 0000:00:14.1: reg 14 io port: [0x3144-0x3147]
    [    0.406064] pci 0000:00:14.1: reg 18 io port: [0x3120-0x3127]
    [    0.406073] pci 0000:00:14.1: reg 1c io port: [0x3140-0x3143]
    [    0.406081] pci 0000:00:14.1: reg 20 io port: [0x3100-0x310f]
    [    0.406140] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0340000-0xf0343fff]
    [    0.406188] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.406193] pci 0000:00:14.2: PME# disabled
    [    0.406660] pci 0000:01:00.0: reg 10 io port: [0x2000-0x20ff]
    [    0.406679] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xf0004000-0xf0004fff]
    [    0.406693] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xf0000000-0xf0003fff]
    [    0.406736] pci 0000:01:00.0: supports D1 D2
    [    0.406738] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.406744] pci 0000:01:00.0: PME# disabled
    [    0.412156] pci 0000:00:04.0: bridge io port: [0x2000-0x2fff]
    [    0.412166] pci 0000:00:04.0: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
    [    0.412220] pci 0000:02:00.0: reg 10 32bit mmio: [0xf0200000-0xf020ffff]
    [    0.420139] pci 0000:00:05.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
    [    0.420199] pci 0000:03:00.0: reg 10 32bit mmio: [0xf0101000-0xf0101fff]
    [    0.420263] pci 0000:03:00.0: supports D1 D2
    [    0.420264] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
    [    0.420269] pci 0000:03:00.0: PME# disabled
    [    0.420320] pci 0000:03:00.1: reg 10 32bit mmio: [0xf0100000-0xf01000ff]
    [    0.420381] pci 0000:03:00.1: supports D1 D2
    [    0.420382] pci 0000:03:00.1: PME# supported from D1 D2 D3hot
    [    0.420386] pci 0000:03:00.1: PME# disabled
    [    0.428197] pci 0000:00:06.0: bridge 32bit mmio: [0xf0100000-0xf01fffff]
    [    0.428310] pci 0000:00:14.4: transparent bridge
    [    0.428345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.428575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    [    0.428649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    [    0.428721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
    [    0.428851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [    0.454478] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.454798] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.455147] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.455477] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.455759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.456071] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.456357] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.456527] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [    0.456700] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.456716] vgaarb: loaded
    [    0.456739] PCI: Using ACPI for IRQ routing
    [    0.456739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.456739] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [    0.458513] Switching to clocksource tsc
    [    0.461073] pnp: PnP ACPI init
    [    0.461090] ACPI: bus type pnp registered
    [    0.466033]   alloc irq_desc for 23 on node 0
    [    0.466036]   alloc kstat_irqs on node 0
    [    0.466123] pnp: PnP ACPI: found 11 devices
    [    0.466124] ACPI: ACPI bus type pnp unregistered
    [    0.466142] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.466145] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
    [    0.466147] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
    [    0.466150] system 00:01: iomem range 0xfed80000-0xfed80fff has been reserved
    [    0.466152] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
    [    0.466159] system 00:08: ioport range 0x400-0x4cf has been reserved
    [    0.466162] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    [    0.466164] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
    [    0.466166] system 00:08: ioport range 0x680-0x6ff has been reserved
    [    0.466168] system 00:08: ioport range 0x77a-0x77a has been reserved
    [    0.466170] system 00:08: ioport range 0xc00-0xc01 has been reserved
    [    0.466172] system 00:08: ioport range 0xc14-0xc14 has been reserved
    [    0.466174] system 00:08: ioport range 0xc50-0xc52 has been reserved
    [    0.466176] system 00:08: ioport range 0xc6c-0xc6c has been reserved
    [    0.466178] system 00:08: ioport range 0xc6f-0xc6f has been reserved
    [    0.466180] system 00:08: ioport range 0xcd0-0xcdb has been reserved
    [    0.466182] system 00:08: ioport range 0x840-0x847 has been reserved
    [    0.466187] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
    [    0.466190] system 00:09: iomem range 0xffe00000-0xffffffff has been reserved
    [    0.471908] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
    [    0.471914] pci 0000:00:04.0:   IO window: 0x2000-0x2fff
    [    0.471918] pci 0000:00:04.0:   MEM window: disabled
    [    0.471923] pci 0000:00:04.0:   PREFETCH window: 0x000000f0000000-0x000000f00fffff
    [    0.471929] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
    [    0.471931] pci 0000:00:05.0:   IO window: disabled
    [    0.471936] pci 0000:00:05.0:   MEM window: 0xf0200000-0xf02fffff
    [    0.471940] pci 0000:00:05.0:   PREFETCH window: disabled
    [    0.471946] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
    [    0.471948] pci 0000:00:06.0:   IO window: disabled
    [    0.471953] pci 0000:00:06.0:   MEM window: 0xf0100000-0xf01fffff
    [    0.471956] pci 0000:00:06.0:   PREFETCH window: disabled
    [    0.471962] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
    [    0.471964] pci 0000:00:14.4:   IO window: disabled
    [    0.472016] pci 0000:00:14.4:   MEM window: disabled
    [    0.472019] pci 0000:00:14.4:   PREFETCH window: disabled
    [    0.472036]   alloc irq_desc for 18 on node -1
    [    0.472038]   alloc kstat_irqs on node -1
    [    0.472046] pci 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.472050] pci 0000:00:04.0: setting latency timer to 64
    [    0.472056]   alloc irq_desc for 17 on node -1
    [    0.472058]   alloc kstat_irqs on node -1
    [    0.472061] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    0.472064] pci 0000:00:05.0: setting latency timer to 64
    [    0.472070] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.472073] pci 0000:00:06.0: setting latency timer to 64
    [    0.472081] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    [    0.472084] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
    [    0.472086] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
    [    0.472087] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf00fffff]
    [    0.472089] pci_bus 0000:02: resource 1 mem: [0xf0200000-0xf02fffff]
    [    0.472091] pci_bus 0000:03: resource 1 mem: [0xf0100000-0xf01fffff]
    [    0.472093] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
    [    0.472095] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
    [    0.472127] NET: Registered protocol family 2
    [    0.472327] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.473715] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [    0.476676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.477040] TCP: Hash tables configured (established 524288 bind 65536)
    [    0.477042] TCP reno registered
    [    0.477126] NET: Registered protocol family 1
    [    0.477141] pci 0000:00:01.0: Boot video device
    [    0.548129] Unpacking initramfs...
    [    0.803765] Freeing initrd memory: 10650k freed
    [    0.806836] Simple Boot Flag at 0x44 set to 0x1
    [    0.807293] audit: initializing netlink socket (disabled)
    [    0.807303] type=2000 audit(1337272620.803:1): initialized
    [    0.810957] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.812906] VFS: Disk quotas dquot_6.5.2
    [    0.812985] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.813061] msgmni has been set to 14961
    [    0.813410] alg: No test for stdrng (krng)
    [    0.813573] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.813578] io scheduler noop registered
    [    0.813580] io scheduler anticipatory registered
    [    0.813582] io scheduler deadline registered
    [    0.813632] io scheduler cfq registered (default)
    [    0.813742]   alloc irq_desc for 24 on node -1
    [    0.813744]   alloc kstat_irqs on node -1
    [    0.813754] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
    [    0.813761] pcieport 0000:00:04.0: setting latency timer to 64
    [    0.813851]   alloc irq_desc for 25 on node -1
    [    0.813852]   alloc kstat_irqs on node -1
    [    0.813858] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
    [    0.813864] pcieport 0000:00:05.0: setting latency timer to 64
    [    0.813948]   alloc irq_desc for 26 on node -1
    [    0.813949]   alloc kstat_irqs on node -1
    [    0.813955] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
    [    0.813960] pcieport 0000:00:06.0: setting latency timer to 64
    [    0.815140] Linux agpgart interface v0.103
    [    0.815175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [    0.815510] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    0.815552] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    0.823964] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.823969] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    0.824025] mice: PS/2 mouse device common for all mice
    [    0.824205] rtc_cmos 00:05: RTC can wake from S4
    [    0.824251] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    0.824321] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [    0.824330] cpuidle: using governor ladder
    [    0.824332] cpuidle: using governor menu
    [    0.824335] No iBFT detected.
    [    0.824663] TCP cubic registered
    [    0.824805] NET: Registered protocol family 10
    [    0.825626] Mobile IPv6
    [    0.825629] NET: Registered protocol family 17
    [    0.825713] PM: Resume from disk failed.
    [    0.825724] registered taskstats version 1
    [    0.826269] rtc_cmos 00:05: setting system clock to 2012-05-17 16:37:01 UTC (1337272621)
    [    0.826337] Initalizing network drop monitor service
    [    0.826387] Freeing unused kernel memory: 592k freed
    [    0.826546] Write protecting the kernel read-only data: 4240k
    [    0.828098] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    0.991405] udev[79]: starting version 164
    [    1.053272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [    1.053317]   alloc irq_desc for 16 on node -1
    [    1.053319]   alloc kstat_irqs on node -1
    [    1.053328] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.053379] r8169 0000:01:00.0: setting latency timer to 64
    [    1.053385] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
    [    1.053437]   alloc irq_desc for 27 on node -1
    [    1.053438]   alloc kstat_irqs on node -1
    [    1.053450] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
    [    1.054173] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc90000c7c000, 2c:41:38:5a:b0:cd, XID 0c900800 IRQ 27
    [    1.084637] SCSI subsystem initialized
    [    1.095559] usbcore: registered new interface driver usbfs
    [    1.095590] usbcore: registered new interface driver hub
    [    1.095762] usbcore: registered new device driver usb
    [    1.113316] libata version 3.00 loaded.
    [    1.114370] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.114462] xhci_hcd 0000:00:10.0: setting latency timer to 64
    [    1.114467] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [    1.114508] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [    1.114761] xhci_hcd 0000:00:10.0: irq 18, io mem 0xf0348000
    [    1.116103] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.118176] usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
    [    1.118188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
    [    1.118192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.118195] usb usb1: Product: xHCI Host Controller
    [    1.118197] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
    [    1.118200] usb usb1: SerialNumber: 0000:00:10.0
    [    1.118294] usb usb1: configuration #1 chosen from 1 choice
    [    1.118298] xHCI xhci_add_endpoint called for root hub
    [    1.118301] xHCI xhci_check_bandwidth called for root hub
    [    1.118339] hub 1-0:1.0: USB hub found
    [    1.118347] hub 1-0:1.0: 4 ports detected
    [    1.118580] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.118708] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    1.118746] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
    [    1.118816] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    1.118843] ehci_hcd 0000:00:12.2: debug port 1
    [    1.118872] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf034e000
    [    1.124686] sdhci: Secure Digital Host Controller Interface driver
    [    1.124688] sdhci: Copyright(c) Pierre Ossman
    [    1.125893] sdhci-pci 0000:03:00.1: SDHCI controller found [10ec:5209] (rev 1)
    [    1.125915]   alloc irq_desc for 19 on node -1
    [    1.125918]   alloc kstat_irqs on node -1
    [    1.125931] sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    1.126007] sdhci-pci 0000:03:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [    1.126015] sdhci-pci 0000:03:00.1: setting latency timer to 64
    [    1.126118] Registered led device: mmc0::
    [    1.126155] mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
    [    1.128112] ACPI Warning for \_TZ_.THRM._AL0: Return Package has no elements (empty) (20090903/nspredef-433)
    [    1.128119] ACPI: [Package] has zero elements (ffff8801fab1e1c0)
    [    1.128206] ACPI: Invalid active0 threshold
    [    1.129598] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    1.129646] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.129650] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.129653] usb usb2: Product: EHCI Host Controller
    [    1.129655] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
    [    1.129657] usb usb2: SerialNumber: 0000:00:12.2
    [    1.129753] usb usb2: configuration #1 chosen from 1 choice
    [    1.129778] hub 2-0:1.0: USB hub found
    [    1.129786] hub 2-0:1.0: 5 ports detected
    [    1.130029] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.130121] xhci_hcd 0000:00:10.1: setting latency timer to 64
    [    1.130125] xhci_hcd 0000:00:10.1: xHCI Host Controller
    [    1.130145] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    [    1.130334] xhci_hcd 0000:00:10.1: irq 17, io mem 0xf034a000
    [    1.133358] thermal LNXTHERM:01: registered as thermal_zone0
    [    1.133367] ACPI: Thermal Zone [THRM] (35 C)
    [    1.133760] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
    [    1.133773] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
    [    1.133776] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.133779] usb usb3: Product: xHCI Host Controller
    [    1.133781] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
    [    1.133784] usb usb3: SerialNumber: 0000:00:10.1
    [    1.133863] usb usb3: configuration #1 chosen from 1 choice
    [    1.133866] xHCI xhci_add_endpoint called for root hub
    [    1.133868] xHCI xhci_check_bandwidth called for root hub
    [    1.133890] hub 3-0:1.0: USB hub found
    [    1.133896] hub 3-0:1.0: 4 ports detected
    [    1.134058] ahci 0000:00:11.0: version 3.0
    [    1.134123] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [    1.134240]   alloc irq_desc for 28 on node -1
    [    1.134242]   alloc kstat_irqs on node -1
    [    1.134259] ahci 0000:00:11.0: irq 28 for MSI/MSI-X
    [    1.134332] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x5 impl SATA mode
    [    1.134337] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
    [    1.134631] scsi0 : ahci
    [    1.134820] scsi1 : ahci
    [    1.134966] scsi2 : ahci
    [    1.135410] ata1: SATA max UDMA/133 abar m2048@0xf0350000 port 0xf0350100 irq 28
    [    1.135412] ata2: DUMMY
    [    1.135415] ata3: SATA max UDMA/133 abar m2048@0xf0350000 port 0xf0350200 irq 28
    [    1.135543] pata_atiixp 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.135773] scsi3 : pata_atiixp
    [    1.135880] scsi4 : pata_atiixp
    [    1.137733] ata4: PATA max UDMA/100 cmd 0x3128 ctl 0x3144 bmdma 0x3100 irq 17
    [    1.137737] ata5: PATA max UDMA/100 cmd 0x3120 ctl 0x3140 bmdma 0x3108 irq 17
    [    1.137870] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.137906] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    1.137924] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [    1.137944] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
    [    1.137966] ehci_hcd 0000:00:13.2: debug port 1
    [    1.137984] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf034c000
    [    1.149764] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    1.149821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.149823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.149825] usb usb4: Product: EHCI Host Controller
    [    1.149826] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
    [    1.149828] usb usb4: SerialNumber: 0000:00:13.2
    [    1.149912] usb usb4: configuration #1 chosen from 1 choice
    [    1.149941] hub 4-0:1.0: USB hub found
    [    1.149949] hub 4-0:1.0: 5 ports detected
    [    1.225125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.225198] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.225311] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    1.225326] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
    [    1.225345] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf034f000
    [    1.284745] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.284749] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.284751] usb usb5: Product: OHCI Host Controller
    [    1.284752] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
    [    1.284754] usb usb5: SerialNumber: 0000:00:12.0
    [    1.284845] usb usb5: configuration #1 chosen from 1 choice
    [    1.284876] hub 5-0:1.0: USB hub found
    [    1.284931] hub 5-0:1.0: 5 ports detected
    [    1.284991] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.285021] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    1.285029] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
    [    1.285045] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf034d000
    [    1.344244] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.344248] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.344250] usb usb6: Product: OHCI Host Controller
    [    1.344251] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
    [    1.344253] usb usb6: SerialNumber: 0000:00:13.0
    [    1.344351] usb usb6: configuration #1 chosen from 1 choice
    [    1.344376] hub 6-0:1.0: USB hub found
    [    1.344431] hub 6-0:1.0: 5 ports detected
    [    1.460260] usb 4-1: new high speed USB device using ehci_hcd and address 2
    [    1.617721] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    1.617759] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [    1.621676] ata3.00: ATAPI: hp      DVDRAM GT31N, NMR0, max UDMA/100
    [    1.624052] ata1.00: ATA-8: SAMSUNG HM641JI, 2AJ10003, max UDMA/133
    [    1.624058] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [    1.625472] ata3.00: configured for UDMA/100
    [    1.627997] usb 4-1: New USB device found, idVendor=064e, idProduct=d281
    [    1.628004] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    1.628009] usb 4-1: Product: HP TrueVision HD
    [    1.628014] usb 4-1: Manufacturer: SuYin
    [    1.628016] 
    [    1.628019] usb 4-1: SerialNumber: HF1016-A821-OV011-VH-R01.01.00
    [    1.628177] usb 4-1: configuration #1 chosen from 1 choice
    [    1.630256] ata1.00: configured for UDMA/133
    [    1.646162] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM641JI  2AJ1 PQ: 0 ANSI: 5
    [    1.650664] scsi 2:0:0:0: CD-ROM            hp       DVDRAM GT31N     NMR0 PQ: 0 ANSI: 5
    [    1.826104] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [    1.826420] sd 0:0:0:0: [sda] Write Protect is off
    [    1.826425] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.826508] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.826778]  sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.831540] Uniform CD-ROM driver Revision: 3.20
    [    1.831692] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [    1.858332]  sda1 sda2 < sda5 >
    [    1.873024] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.877186] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.877229] sr 2:0:0:0: Attached scsi generic sg1 type 5
    [    2.016216] usb 6-2: new full speed USB device using ohci_hcd and address 2
    [    2.186866] usb 6-2: New USB device found, idVendor=138a, idProduct=0018
    [    2.186876] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [    2.186882] usb 6-2: SerialNumber: bc1e84fe585d
    [    2.187025] usb 6-2: configuration #1 chosen from 1 choice
    [    2.250647] device-mapper: uevent: version 1.0.3
    [    2.251038] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
    [   56.882682] PM: Starting manual resume from disk
    [   56.882687] PM: Resume from partition 254:2
    [   56.882688] PM: Checking hibernation image.
    [   56.883199] PM: Error -22 checking image file
    [   56.883206] PM: Resume from disk failed.
    [   56.920674] kjournald starting.  Commit interval 5 seconds
    [   56.920720] EXT3-fs: mounted filesystem with ordered data mode.
    [   59.133853] udev[543]: starting version 164
    [   59.543728] processor LNXCPU:00: registered as cooling_device0
    [   59.543829] processor LNXCPU:01: registered as cooling_device1
    [   59.544098] processor LNXCPU:02: registered as cooling_device2
    [   59.544172] processor LNXCPU:03: registered as cooling_device3
    [   59.578569] ACPI: AC Adapter [AC] (on-line)
    [   59.628878] ACPI: Battery Slot [BAT0] (battery present)
    [   59.629098] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [   59.629148] ACPI: Power Button [PWRB]
    [   59.629214] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [   59.631854] ACPI: Lid Switch [LID]
    [   59.631970] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [   59.632045] ACPI: Power Button [PWRF]
    [   59.642129] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [   59.736888] ACPI: WMI: Mapper loaded
    [   59.788015] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
    [   59.829856] Linux video capture interface: v2.00
    [   59.848649] acpi device:01: registered as cooling_device4
    [   59.848789] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [   59.848836] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [   59.859884] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
    [   59.859933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   59.862793] lis3lv02d: laptop model unknown, using default axes configuration
    [   60.031314] lis3lv02d: unknown sensor type 0x33
    [   60.031369] lis3lv02d: probe of HPQ0004:00 failed with error -22
    [   60.031393] lis3lv02d driver loaded.
    [   60.050712] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:d281)
    [   60.054333] input: HP TrueVision HD as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input7
    [   60.054375] usbcore: registered new interface driver uvcvideo
    [   60.054378] USB Video Class driver (v0.1.0)
    [   60.307554] Unable to query Synaptics hardware.
    [   60.376352] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [   60.376485] HDA Intel 0000:00:01.1: setting latency timer to 64
    [   60.475251] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   60.590790] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
    [   60.596560] input: HD-Audio Generic Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
    [   60.596637] input: HD-Audio Generic HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
    [   61.159371] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
    [   62.525742] EXT3 FS on dm-1, internal journal
    [   62.799093] loop: module loaded
    [   63.374792] Adding 14958584k swap on /dev/mapper/Travis-swap_1.  Priority:-1 extents:1 across:14958584k 
    [   64.364586] kjournald starting.  Commit interval 5 seconds
    [   64.365344] EXT3 FS on dm-3, internal journal
    [   64.365353] EXT3-fs: mounted filesystem with ordered data mode.
    [   66.248354] fuse init (API version 7.13)
    [   67.464678] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
    [   68.934559] Bluetooth: Core ver 2.15
    [   68.934762] NET: Registered protocol family 31
    [   68.934767] Bluetooth: HCI device and connection manager initialized
    [   68.934770] Bluetooth: HCI socket layer initialized
    [   69.044899] Bluetooth: L2CAP ver 2.14
    [   69.044901] Bluetooth: L2CAP socket layer initialized
    [   69.190380] Bluetooth: RFCOMM TTY layer initialized
    [   69.190386] Bluetooth: RFCOMM socket layer initialized
    [   69.190388] Bluetooth: RFCOMM ver 1.11
    [   69.553461] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   69.553464] Bluetooth: BNEP filters: protocol multicast
    [   69.912586] Bridge firewalling registered
    [   69.984591] Bluetooth: SCO (Voice Link) ver 0.6
    [   69.984593] Bluetooth: SCO socket layer initialized
    [   71.324730] r8169 0000:01:00.0: eth0: link down
    [   71.325693] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   73.210440] lp: driver loaded but no devices found
    [   73.249895] ppdev: user-space parallel port driver
    and uname:

    2.6.32-5-amd64
    Last edited by Milburnt; 05-17-2012 at 09:15 PM.

  3. #13
    Linux Newbie
    Join Date
    Jan 2012
    Location
    Ohio
    Posts
    175
    If u can wait til this evening I can get it set up in a VM and give u exact commands. Also, open up the bottom of the laptop and u can see what wireless it is. Lastly try HP's site with the serial number to see what is loaded.

  4. #14
    Just Joined!
    Join Date
    May 2012
    Posts
    25
    thanks ktech11

  5. #15
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Here is your wireless card:
    Code:
    02:00.0 Network controller [0280]: RaLink Device [1814:5390]
    	Subsystem: Hewlett-Packard Company Device [103c:1636]
    I found this thread on the Debian Forums.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  6. #16
    Just Joined!
    Join Date
    May 2012
    Posts
    25
    I made a mistake, I can not get onto the net even when wired into the router. running the command "dmesg | grep firmware" as su returns nothing. the card is a ralink RT5390 (which is not supported by ralink in linux as best as I can tell).

  7. #17
    Just Joined!
    Join Date
    Dec 2011
    Posts
    36
    correction to that last post I have explained that the RT539x PCIe Drivir is thet one ta cover his card.

    Code:
    02:00.0 Network controller [0280]: RaLink Device [1814:5390]
    	Subsystem: Hewlett-Packard Company Device [103c:1636]
    this says Ralink device... other google searches I have been helping with have suggested that it's the right card as well... also the google search he did for "RaLink Device [1814:5390]" suggested this as well... so we aren't 100% sure that it's the 5390 but probably it is... The other part of the problem is that he can't connect WIRED either... like his eth0 isn't working correctly so we need to figure out the best way to get the driver onto his system. Prolly flash drive...

  8. #18
    Administrator jayd512's Avatar
    Join Date
    Feb 2008
    Location
    Kentucky
    Posts
    5,023
    Quote Originally Posted by Milburnt View Post
    I made a mistake, I can not get onto the net even when wired into the router. running the command "dmesg | grep firmware" as su returns nothing. the card is a ralink RT5390 (which is not supported by ralink in linux as best as I can tell).
    Power down the computer. Connect to your router via ethernet cable, and power on.
    After booting, open a terminal and execute:
    Code:
    ifconfig -a
    Use sudo or su - as needed.
    Jay

    New users, read this first.
    New Member FAQ
    Registered Linux User #463940
    I do not respond to private messages asking for Linux help. Please keep it on the public boards.

  9. #19
    Linux Newbie
    Join Date
    Jan 2012
    Location
    Ohio
    Posts
    175
    I am running through a Debian 6 set up in a VM right now. I have two thoughts. First, if it is anything like CentOS 6 the network card is set to down from the jump. Second, if he is very new to Linux, a pure Debian install may not be best. Ubuntu or Mint might be better. They tend to have easier install processes and both package more drivers in the install.

  10. #20
    Linux Newbie
    Join Date
    Jan 2012
    Location
    Ohio
    Posts
    175
    Quote Originally Posted by Milburnt View Post
    I made a mistake, I can not get onto the net even when wired into the router. running the command "dmesg | grep firmware" as su returns nothing. the card is a ralink RT5390 (which is not supported by ralink in linux as best as I can tell).
    Milburnt

    Please go to the command line and type vi /etc/network/interfaces and paste the result here.

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •