ALS100 - ISA sound card

[plpiko]

Hi

My problem isnt new. I have huge problems with installing ISA sound card (ALS100) on my Debian GNU/Linux (sarge).
I tried many recipies and its all failed. I failed. When I installed system and started KDE I got:

sound server informational message:
error while initializing the sound driver:
device /dev/dsp can't be opened (no such device)
The sound server will continue, using the null output device

What I did... I opened google and tried to solve the problem. Unfortunatly without any succes.
Because it is ISA card i installed isapnptools. Then I created /etc/isapnp.conf.
Next #pnpdump > /etc/isapnp.conf I selected something in this file..
And #isapnp isapnp.conf
I loaded appropriated modules... I think.

And... it doesnt work.
After making /dev?MAKEDEV I dont have still files like /dev/audio or /dev/dsp

I attach dmesg, lspci, isapnp.conf, lsmod, sndstat.

-dmesg:
Linux version 2.6.8-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 12:46:35 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
192MB LOWMEM available.
On node 0 totalpages: 49152
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 45056 pages, LIFO batch:11
HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 501.247 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 187476k/196608k available (1337k kernel code, 8468k reserved, 732k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 989.18 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 501.0058 MHz.
..... host bus clock speed is 100.0211 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4216k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc088, dseg 0xf0000
pnp: 00:0b: ioport range 0x208-0x20f has been reserved
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: unexpected or unknown tag type 0xff for logical device 3 (device 1), ignored
isapnp: checksum for device 1 is not valid (0xad)
pnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'ALS100 Media Audio Controller'
isapnp: 1 Plug & Play card detected total
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 3276
NET: Registered protocol family 8
NET: Registered protocol family 20
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4216 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaio, hdbio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcio, hddio
hda: ST380011A, ATA DISK drive
hdb: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 66055248 sectors (33820 MB)
native capacity is 156301488 sectors (80026 MB)
hda: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3
p3: <bsd: p6 p7 p8 p9 p10 >
hdc: ST34321A, ATA DISK drive
hdd: LG CD-ROM CRD-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 128KiB
hdc: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=8894/15/63, UDMA(33)
/dev/ide/host0/bus1/target0/lun0:<4>hdc: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hdc: set_multmode: error=0x04 { DriveStatusError }
p1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 651992
EXT3-fs: hda1: 1 orphan inode deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 979924k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
pnp: Device 01:01.00 activated.
pnp: Unable to assign resources to device 01:01.03.
als100: MPU401 pnp configure failure, skipping
Capability LSM initialized
Linux agpgart interface v0.100 (c) Dave Jones
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 10, io base 0000e000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:09.0
uhci_hcd 0000:00:09.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:09.0: irq 9, io base 0000e400
uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
hub 1-0:1.0: over-current change on port 1
hub 1-0:1.0: over-current change on port 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:09.1
uhci_hcd 0000:00:09.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:09.1: irq 9, io base 0000e800
uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 3-1: new full speed USB device using address 2
usbcore: registered new driver speedtch
PCI: Found IRQ 10 for device 0000:00:09.2
ehci_hcd 0000:00:09.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:09.2: irq 10, pci mem cc83f000
ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb 3-1: USB disconnect, address 2
usb 3-1: new full speed USB device using address 3
agpgart: Detected an Intel 440BX Chipset.
agpgart: Maximum main memory to use for agp memory: 150M
agpgart: AGP aperture is 128M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8-2-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x77, irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
pnp: Device 01:01.02 activated.
gameport: NS558 PnP at pnp01:01.02 io 0x200 size 2 speed 710 kHz

-lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:09.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
0000:00:09.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
0000:00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2)

-lsmod
Module Size Used by
n_hdlc 9476 1
ppp_synctty 9472 1
ppp_generic 27540 5 ppp_synctty
slhc 7040 1 ppp_generic
ipv6 229892 12
lp 10408 0
binfmt_misc 11272 1
ns558 5632 0
gameport 4736 1 ns558
parport_pc 33348 1
parport 37320 2 lp,parport_pc
floppy 54992 0
pcspkr 3816 0
rtc 12088 0
pci_hotplug 30640 0
intel_agp 20512 1
ehci_hcd 27908 0
uhci_hcd 29328 0
usbcore 104164 4 ehci_hcd,uhci_hcd
agpgart 31784 1 intel_agp
capability 4872 0
commoncap 7168 1 capability
snd_als100 11816 1
snd_opl3_lib 9728 1 snd_als100
snd_hwdep 9092 1 snd_opl3_lib
tsdev 7168 0
snd_sb16_dsp 10624 1 snd_als100
snd_sb_common 15104 2 snd_als100,snd_sb16_dsp
snd_pcm 85384 1 snd_sb16_dsp
snd_page_alloc 11144 1 snd_pcm
snd_timer 23300 2 snd_opl3_lib,snd_pcm
snd_mpu401_uart 7296 1 snd_als100
snd_rawmidi 23204 1 snd_mpu401_uart
mousedev 9996 2
snd_seq_device 7944 2 snd_opl3_lib,snd_rawmidi
evdev 9088 0
snd 50660 12 snd_als100,snd_opl3_lib,snd_hwdep,snd_sb16_dsp,snd _sb_common,snd_pcm,snd_timer,snd_mpu401_uart,snd_r awmidi,snd_seq_device
soundcore 9824 1 snd
apm 19948 2
psmouse 17800 0
ide_cd 38176 0
cdrom 35740 1 ide_cd
ext3 109544 1
jbd 54552 1 ext3
ide_generic 1664 0
piix 12448 1
ide_disk 16768 3
ide_core 125028 4 ide_cd,ide_generic,piix,ide_disk
unix 26036 246
font 8576 0
vesafb 6688 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb

-isapnp.conf
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 70 01 00 00 00 01 00 93 05

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 70 01 00 00 00 01 00 93 05)
# Vendor Id ALS0001, Serial Number 16777216, checksum 0x70.
# Version 1.0, Vendor version 0.0
# ANSI string -->ALS100 Media Audio Controller<--
#
# Logical device id @@@0001
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ALS0001/16777216 (LD 0

# Multiple choice time, choose one only !

# Start dependent functions: priority preferred
# Fixed IO base address 0x0220
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220) (CHECK))
# IRQ 5.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 5.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed type F
(DMA 0 (CHANNEL 5))
# Next DMA channel 1.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed type F
(DMA 1 (CHANNEL 1))

# Start dependent functions: priority acceptable
# Logical device decodes 10 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0280
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0220) (CHECK))
# IRQ 5, 7, 9 or 10.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 5, 6 or 7.
# 16 bit DMA only
# Logical device is a bus master
# DMA may not execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed type F
# (DMA 0 (CHANNEL 5))
# Next DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed type F
# (DMA 1 (CHANNEL 0))

# Start dependent functions: priority functional
# Logical device decodes 10 bit IO address lines
# Minimum IO base address 0x0100
# Maximum IO base address 0x03f0
# IO base alignment 16 bytes
# Number of IO addresses required: 16
# (IO 0 (SIZE 16) (BASE 0x0100) (CHECK))
# IRQ 5, 7, 9, 10, 11, 12 or 15.
# High true, edge sensitive interrupt
# Low true, edge sensitive interrupt
# High true, level sensitive interrupt
# Low true, level sensitive interrupt
# (INT 0 (IRQ 5 (MODE -L)))
# First DMA channel 0, 1, 3, 5, 6 or 7.
# 8 & 16 bit DMA
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may execute in count by word mode
# DMA channel speed type F
# (DMA 0 (CHANNEL 0))

# End dependent functions
(NAME "ALS0001/16777216[0]{ALS100 Media Audio Controller}")
(ACT Y)
))
#
# Logical device id @H@0001
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ALS0001/16777216 (LD 1
# Fixed IO base address 0x0388
# Number of IO addresses required: 8
# (IO 0 (SIZE (BASE 0x038 (CHECK))
(NAME "ALS0001/16777216[1]{ALS100 Media Audio Controller}")
# (ACT Y)
))
#
# Logical device id @P@0001
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ALS0001/16777216 (LD 2
# Fixed IO base address 0x0200
# Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x0200) (CHECK))
(NAME "ALS0001/16777216[2]{ALS100 Media Audio Controller}")
# (ACT Y)
))
#
# Logical device id @X@0001
# Device supports I/O range check register
# Device supports vendor reserved register @ 0x38
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE ALS0001/16777216 (LD 3

# Multiple choice time, choose one only !

# Start dependent functions: priority preferred
# Fixed IO base address 0x0330
# Number of IO addresses required: 2
(IO 0 (SIZE 2) (BASE 0x0330) (CHECK))
# IRQ 9.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 9 (MODE +E)))

# Start dependent functions: priority acceptable
# Logical device decodes 10 bit IO address lines
# Minimum IO base address 0x0100
# Maximum IO base address 0x03f0
# IO base alignment 16 bytes
# Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x0100) (CHECK))
# IRQ 5, 7, 9, 10, 11, 12 or 15.
# High true, edge sensitive interrupt
# Low true, edge sensitive interrupt
# High true, level sensitive interrupt
# Low true, level sensitive interrupt
# (INT 0 (IRQ 5 (MODE -L)))

# End dependent functions
(NAME "ALS0001/16777216[3]{ALS100 Media Audio Controller}")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)

-sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.4 emulation code)
Kernel: Linux debian 2.6.8-2-386 #1 Tue Aug 16 12:46:35 UTC 2005 i686
Config options: 0

Installed drivers:
Type 10: ALSA emulation

Card config:
Avance Logic ALS100, Sound Blaster 16 (ALS-100) at 0x220, irq 5, dma 1&5

Audio devices: NOT ENABLED IN CONFIG

Synth devices: NOT ENABLED IN CONFIG

Midi devices: NOT ENABLED IN CONFIG

Timers:
7: system timer

Mixers: NOT ENABLED IN CONFIG

Can anybody help me? I pleeese ;(

[Vergil83]

does alsa detect it?

alsaconf

If it says program not found do

apt-get install alsa-utils

[plpiko]

i did...
alsa doesnt detect my card but i get:
/usr/sbin/alsaconf: line 1178: /etc/init.d/alsa: No such file or directory
It seems i dont have alsa in init.d directory.
Where to find this script??

[Vergil83]

it should have been created when you installed alsa. I would try to reinstall alsa