Results 1 to 2 of 2
I have recently switched from suse 9.3 to simply mepis. I am having trouble getting my nvidia driver working so i can run 3d apps. This same computer ran 3d ...
- 11-14-2005 #1Linux Newbie
- Join Date
- Nov 2004
- Location
- USA
- Posts
- 151
nvidia driver problem in mepis
I have recently switched from suse 9.3 to simply mepis. I am having trouble getting my nvidia driver working so i can run 3d apps. This same computer ran 3d fine in suse, but not here. I checked the nvidia driver box in the mepis os center, rebooted, and x crashed back down to text mode. I tried installing it from synaptic, same thing. To fix it after it crashes, i have to throw in the mepis cd, reboot, and go to my XF86 config file and change "nvidia" back to "nv" , reboot again, and x comes up. (there may be an eaiser way, but that works) I thought someone here may have some insight on what is wrong with my setup. Here is my hardware info;
envision eft920 monitor
nvidia geforce fx5200 video card
simply mepis 3.3.2
kernel 2.6.12
my sources list;
# See sources.list(5) for more information, especialy
# This file should be edited through synaptic
# New sources should be added only in the section at the end of this file!
# Primary
deb ftp://ftp.debian.org/debian/ etch main contrib non-free
# deb ftp://ftp.debian.org/debian/ sid main contrib non-free
# deb ftp://ftp.us.debian.org/debian/ testing main contrib non-free
# deb ftp://ftp.debian.org/debian/ unstable main contrib non-free
# MEPIS apt pool - specific packages available on-line
deb http://apt.mepis.org/3.3.2/ etch main
deb http://apt.mepis.org/3.3.2-ta/ unstable main
# deb http://apt.mepis.org/3.3.2/ sid main
# mplayer
deb ftp://ftp.nerim.net/debian-marillat/ etch main
# Security upgrades for Etch
deb http://secure-testing.debian.net/debian-secure-testing/ etch/security-updates main contrib non-free
and my XF86 file;
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
#InputDevice "USB Mouse" "CorePointer"
#InputDevice "Touchpad" "CorePointer"
#InputDevice "Stylus" "CorePointer"
#InputDevice "Eraser" "CorePointer"
#InputDevice "Cursor" "CorePointer"
#InputDevice "Serial Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
# True type and type1 fonts
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/truetype/ttf-xfree86-nonfree"
FontPath "/usr/share/fonts/truetype/java"
FontPath "/usr/share/fonts/truetype/arphic"
FontPath "/usr/share/fonts/truetype/freefont"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/type1/gsfonts"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/CID"
FontPath "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/afms"
FontPath "/usr/share/fonts/bitmap"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/ttf"
FontPath "/usr/share/fonts/type1"
FontPath "/usr/X11R6/lib/X11/fonts/defoma"
EndSection
Section "Module"
#Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Repeater" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Emulate3Timeout" "70"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Stylus"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom eraser
Section "InputDevice"
Identifier "Eraser"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom"
Endsection
# Settings for wacom cursor (mouse)
Section "InputDevice"
Identifier "Cursor"
Driver "wacom"
Option "Mode" "Absolute"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom"
Endsection
Section "Monitor"
Identifier "Monitor0"
VendorName "Generic CRT"
ModelName "Monitor 1280x1024"
#Option "DPMS" "true"
HorizSync 30-98
VertRefresh 50-160
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
ModeLine "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 +HSync +VSync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
Modeline "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync
EndSection
Section "Device"
#Option "sw_cursor" # needed for some ati cards
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
#Option "NoUseBios" # needed for some Savage cards
Option "UseInternalAGPGART" "no"
# nvidia special options, use with care
Option "CursorShadow" "1"
Option "CursorShadowAlpha" "63"
Option "CursorShadowYOffset" "2"
Option "CursorShadowXOffset" "4"
Option "FlatPanelProperties" "Scaling = native"
Option "NoLogo" "false"
Option "IgnoreEdid" "true" # needs to be true for some nvidia cards
Identifier "Card0"
Driver "nv"
BoardName "unknown"
#BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024"
EndSubSection
# Only the official NVIDIA driver supports twinview
# these setting are an example
Option "TwinView" "false"
Option "SecondMonitorVendorName" "unknown"
Option "SecondMonitorModelName" "unknown"
Option "SecondMonitorHorizSync" "30-82"
Option "SecondMonitorVertRefresh" "50-75"
Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480"
Option "TwinViewOrientation" "RightOf"
Option "ConnectedMonitor" "dfp,dfp"
EndSection
Section "DRI"
Mode 0666
EndSection
Any help would be greatly appreciated!!!Registered Linux user #388374
Insanity: doing the same thing over and over again and expecting different results
Albert Einstein, (1879 - 1955)
- 08-17-2006 #2Just Joined!
- Join Date
- Aug 2006
- Posts
- 2
Issue is interaction between Section "Monitor" and Section "Screen". Your monitor has multiple '1280x1024". You have two choices here:
Originally Posted by tp671
(1) Guess which "1280x1024" line you will use (check frequency- yours is up to 160 so do not use any over 160, i.e. 181.75)
or
(2) (My choice) In ModeLne, change "1280x1024" to "1280x1024a" "1280x1024b" etc. Then in screen, have modes "1280x1024a" etc.
Example:
Modeline "1280x1024a" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024b" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024c" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024d" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024e" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024f" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Modes "1280x1024a" "1280x1024b" "1280x1024c" "1280x1024d" "1280x1024e"
"1280x1024f"
Clear?
tllucero at stardevsoft dot com
Reply With Quote 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
