Results 1 to 5 of 5
I have set up a server (gateway) and have an DSL connection with dynamic IP and DNS updates from my ISP on eth0. I run DHCP service on the machine ...
- 05-19-2006 #1Just Joined!
- Join Date
- Nov 2005
- Posts
- 10
help with assigning DSL DNS to clients via DHCP
I have set up a server (gateway) and have an DSL connection with dynamic IP and DNS updates from my ISP on eth0. I run DHCP service on the machine and give out IP addresses to the LAN (192.168.0.0/24), and default gateway (192.168.0.1) and DNS as well. These DNS i have are not so reliable and my Dsl ISP provides different one at each connection i make. My question, would it help if i set up a local dns server help? is there a way i can make the clients (on the LAN) to get current DNS from the server (192.168.0.1)'s /etc/resolv.conf when renewing or getting IP addresses.
thanks again.
Debian 3.1
- 05-19-2006 #2
not sure of how it's done exactly, but i think you'd need your gateway to receive the IP address dynamically, then set all the other ones to get that IP address. for the boxes on your LAN you'd set the DNS to the IP address of your gateway which would give them out. i don't know how to setup the gateway though.
Here's why Linux is easier than Windows:
Package Managers! Apt-Get and Portage (among others) allow users to install programs MUCH easier than Windows can.
Hardware Drivers. In SuSE, ALL the hardware is detected and installed automatically! How is this harder than Windows' constant disc changing and rebooting?
- 05-19-2006 #3
The adsolute easiest way to do what you are trying to do is through hardware. I have the same set-up, but I am using an Aero14 Broadband Router (it runs linux). I purchased the router for about $20 off of newegg.com. The router has support for dyndns.com and will update each time your ip addy changes. You simply set it for dhcp. Each server can be individually configured for static or dhcp. It supports virtual hosting. All through an intuitive web interface. I assign each server to use the router for DNS. The router automatically picks up my isp's DNS.
Hope this helps.
also debian package ifplugd will allow hotplugging of the network. I installed it because my 3 year old will unhook all of my network cables if I turn my back for too long.
On my setup my router gets my isp's DNS's and a dynamic IP addy, each machine on my network is configured thru dhcp to use 192.168.10.1 as a DNS, DHCP and Gateway
- 05-19-2006 #4Just Joined!
- Join Date
- Nov 2005
- Posts
- 10
just to set this clearly
this works fine on external interface (Dsl) i get both an IP a DNS automaticaly upon connection and this updates my /etc/resolv.confi think you'd need your gateway to receive the IP address dynamically
Do you mean i then install BIND ro similar? which bring me another Q what would i set my forwarders to? or do i leave them blank?for the boxes on your LAN you'd set the DNS to the IP address of your gateway which would give them out
i have no need to update my IP i run ipcheck and that work fine.The router has support for dyndns.com and will update each time your ip addy changes
my server (gateway) does get an ip and uses the dyndns as well, but the issue i have is for clients on my LAN (192.168.0.0) network to get the DNS in my server's /etc/resolv.conf (which i get from my ISP upon connecting.The router automatically picks up my isp's DNS.
I hope this clarifies the uncertain
- 05-19-2006 #5
do you have a full dhcp server setup on your gateway server?
assuming you do have a dhcp server setup... debian package maradns is a recursive dns server. i believe thats what your looking for. install maradns on your gateway, then tell all your local machines to use your gateway as a dns. there is a lot more info on their website www.maradns.org


Reply With Quote
