Hi!
Following the etch upgrade I got Wodim. I managed to burn 2 CDs using GnomeBaker. One a music CD (in this case the program converted my mp3 to audio files) and one data disk (mp3 directly to the disk.
Encouraged by that I tired to burn a third disk. 6 failed burns (and wasted disks- BTW- can I recover them somehow?) I post this message. My output of the "Baking" window is as follows:


Quote:
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as "cdrecord". Send problem reports to
debburn-devel@lists.alioth.debian.org, don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling

wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
TOC Type: 3 = CD-ROM XA mode 2

Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not behave
as expected.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W8432T'
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 4194304 = 4096 KB
Drive DMA Speed: 11561 kB/s 65x CD 8x DVD
FIFO size : 4194304 = 4096 KB
4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
Performing OPC...
Starting new track at sector: 0
Writing time: 8.544s
Average write speed 937.4x.
Fixating...
Fixating time: 67.048s




So, it starts and then it fixes the disk in like 15 second, ejecting it and informing me that the burn failed. I tried TAO and DAO with the same, miserable, result.

thus, I managed twice, failed all the rest and I would GREATLY appreciate some help because I would like to burn my old win partition and then erase it.

THX!