[SOLVED] Help with Fuji Finepix J38
Hi guys I'm having a problem since this camera isn't "supported" I googled for similar problem but no luck I want to get the pictures out of it, it uses SDHC and my reader doesn't support that format so the only way is through usb but i cant get it to be recognize
I dont know if this is useful but heres the output of some commands i think you'll need to help me
I appreciate any help you can give thanks
mount
Code:
/dev/sda6 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/sda1 on /home type ext3 (rw)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
gvfs-fuse-daemon on /home/devian/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=devian)
fdisk
Code:
Disk /dev/sdb: 80.0 GB, 80025280000 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00070513
Device Boot Start End Blocks Id System
/dev/sdb1 1 9729 78148161 83 Linux
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x76647664
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12755 102453088+ 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 12756 60801 385929495 f W95 Ext'd (LBA)
Partition 2 does not end on cylinder boundary.
/dev/sda5 12756 55487 343244758+ 7 HPFS/NTFS
/dev/sda6 55488 60107 37110118+ 83 Linux
/dev/sda7 60108 60801 5574523+ 82 Linux swap / Solaris
lsusb
Code:
Bus 002 Device 004: ID 04cb:01fc Fuji Photo Film Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg
Code:
usb 2-10: new full speed USB device using ohci_hcd and address 6
usb 2-10: New USB device found, idVendor=04cb, idProduct=01fc
usb 2-10: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 2-10: Product: USB PTP
usb 2-10: SerialNumber: 592D33383131090916C6C59UE05270
