Dual monitor Intel 82915G & nVidia RIVA TNT2 Model 64, FC6, Dell Optiplex Gx520

[powah]

I want to setup dual monitor for the Dell Optiplex Gx520 computer.
The motherboard has an Intel Corporation 82915G Integrated Graphics
Controller.
Then I add an nVidia Corporation NV5M64 RIVA TNT2 Model 64/Model 64
Pro video card.
The dual monitor work on Windows 2000 with the Intel chip as the
primary screen and the nVidia chip as the secondary screen.
Therefore no problem with the hw.

However, dual monitor does not work on the Fedora core 6 (I cannot use
FC10).
The nVidia chip is working but the Intel chip do not work (moving the
mouse do not go to that monitor and no image is displayed on the
monitor).

I configure dual monitor by using the "System, Display, Setting" menu
and clicking the "dual head" checkbox, then restart X server.
/etc/X11/xorg.conf is as follows:
# Xorg configuration created by system-config-display
# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" LeftOf "Screen1"
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
ModelName "DELL E176FP (autoconfigured)"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 75.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "i810"
VendorName "Videocard Vendor"
BoardName "Intel Corporation 82945G/GZ Integrated Graphics
Controller"
BusID "PCI:0:2:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1024x768"
"800x600" "640x480"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

[coopstah13]

are you sure that is the correct BusID for the intel card? check with

/sbin/lspci | grep -i vga

[powah]

are you sure that is the correct BusID for the intel card? check with

/sbin/lspci | grep -i vga

The intel card is not recognized at vga but as Display controller.
Please help.
# /sbin/lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:02.0 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:02.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15)