Find the answer to your Linux question:
Results 1 to 7 of 7
hi ! i've installed this xfree 4.3.0-r7 ati-drivers 3.9.0 kernel 2.6.8 every time i start xfree i get this message Code: Module Loader present Markers: (--) probed, (**) from config ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Newbie robak's Avatar
    Join Date
    Jan 2004
    Posts
    136

    problems ati drivers


    hi !

    i've installed this

    xfree 4.3.0-r7
    ati-drivers 3.9.0
    kernel 2.6.8

    every time i start xfree i get this message
    Code:
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
             (++) from command line, (!!) notice, (II) informational,
             (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 30 00:03:31 2004
    (==) Using config file: "/etc/X11/XF86Config-4"
    Using vt 7
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
    (EE) fglrx(0): cannot init AGP
    Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
    so, gnome starts without problems but i have no opengl and glxgears runs with 300fps ONLY!

    can somebody help me please?

    thx in advance
    greez robak
    make install not love

    Registered Linux user number 369245

  2. #2
    Linux Guru techieMoe's Avatar
    Join Date
    Aug 2004
    Location
    Texas
    Posts
    9,496
    Well, more than likely your problem is not with XFree86 or OpenGL, but rather ATI's drivers. Could you post the contents of your /etc/X11/XF86Config-4 file?
    Registered Linux user #270181
    TechieMoe's Tech Rants

  3. #3
    Linux Newbie robak's Avatar
    Join Date
    Jan 2004
    Posts
    136
    of course

    Code:
    Section "dri"
        Mode 0666
    EndSection
    
    
    Section "Module"
        Load        "dbe"  	# Double buffer extension
        SubSection  "extmod"
    #      Option    "omit xfree86-dga" 
        EndSubSection
        Load        "type1"
        Load        "freetype"
        Load        "glx"   # libglx.a
        Load        "dri"   # libdri.a
    EndSection
    
    
    Section "Files"
        RgbPath	"/usr/X11R6/lib/X11/rgb"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    EndSection
    
    
    Section "InputDevice"
        Identifier	"Keyboard1"
        Driver	"Keyboard"
        Option "AutoRepeat" "500 30"
        Option "XkbRules"	"xfree86"
        Option "XkbModel"	"pc105"
        Option "XkbLayout"	"de"
    EndSection
    
    
    Section "InputDevice"
        Identifier	"Mouse1"
        Driver "mouse"
        Option "Protocol"   "ImPS/2"
        Option "ZAxisMapping"   "4 5"
        Option "Device"     "/dev/mouse"
    EndSection
    
    
    Section "Monitor"
        Identifier  "Monitor0"
        HorizSync   31.5 - 60.0
        VertRefresh 60 - 75
        Option "DPMS"
    EndSection
    
    #######   FOR WHAT DO I NEED THIS ??????? @linuxforums.org ################
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset     "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver      "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # installed.
    
    #    BusID       "PCI:0:10:0"
    
    #    VideoRam    256
    
    #    Clocks      25.2 28.3
    
    EndSection
    #######################################################################
    
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
    # ### generic DRI settings ###
    # === disable PnP Monitor  ===
        #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === misc DRI settings ===
        Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
    # ### FireGL DDX driver module specific settings ###
    # === Screen Management ===
        Option "DesktopSetup"               "0x00000000" 
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "unspecified" 
        Option "VRefresh2"                  "unspecified" 
        Option "ScreenOverlap"              "0" 
    # === TV-out Management ===
        Option "NoTV"                       "yes"     
        Option "TVStandard"                 "NTSC-M"     
        Option "TVHSizeAdj"                 "0"     
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"     
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"     
        Option "TVColorAdj"                 "0"     
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "yes"
        Option "ForceGenericCPU"            "no"
        BusID "PCI:1:0:0"    # vendor=1002, device=4144
        Screen 0
    EndSection
    
    
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
    
        Subsection "Display"
            Depth       24
            Modes       "1024x768"
        EndSubsection
    EndSection
    
    
    Section "ServerLayout"
        Identifier  "Server Layout"
        Screen "Screen0"
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    make install not love

    Registered Linux user number 369245

  4. #4
    Linux Guru techieMoe's Avatar
    Join Date
    Aug 2004
    Location
    Texas
    Posts
    9,496
    Hmm. Well from what I can tell, the usual suspects are configured correctly (loading "glx" and "dri", driver is "fglrx"). You might try setting the Use Internal AGPGART to "no". I seem to remember hearing that on an ATI forum once. Other than that, I'm going to hand off to someone with a little more ATI tweaking experience.
    Registered Linux user #270181
    TechieMoe's Tech Rants

  5. #5
    Linux Newbie robak's Avatar
    Join Date
    Jan 2004
    Posts
    136
    i set Use Internal AGPGART to "no"
    it doesn't help

    i tried to emerge Xorg instead of Xfree and reinstalled the ati-drivers.
    when i start fgl_glxgears i get this:

    Code:
    X Error of failed request:  BadMatch (invalid parameter attributes)
      Major opcode of failed request:  144 (GLX)
      Minor opcode of failed request:  5 (X_GLXMakeCurrent)
      Serial number of failed request:  31
      Current serial number in output stream:  31
    does it help you?
    make install not love

    Registered Linux user number 369245

  6. #6
    Just Joined!
    Join Date
    Mar 2005
    Location
    Idaho
    Posts
    2

    Same message

    I am also getting the same message, I have 2.6.10, latest ati drivers, and have tried every how-to but nothing still.....


    X Error of failed request: BadMatch (invalid parameter attributes)
    Major opcode of failed request: 145 (GLX)
    Minor opcode of failed request: 5 (X_GLXMakeCurrent)
    Serial number of failed request: 32
    Current serial number in output stream: 32

  7. #7
    Just Joined!
    Join Date
    Mar 2005
    Location
    Idaho
    Posts
    2

    Also

    Heres my xorg.conf


    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"
    RgbPath "/usr/lib/X11/rgb"
    ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/CID/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/share/fonts/100dpi/"
    EndSection

    Section "Module"
    Load "record"
    Load "extmod"
    Load "dbe"
    Load "dri"
    Load "glx"
    Load "xtrap"
    Load "freetype"
    Load "type1"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbModel" "pc105"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/mouse"
    Option "ZAxisMapping" "4 5"
    EndSection

    Section "Monitor"
    #DisplaySize 330 250 # mm
    Identifier "Monitor0"
    VendorName "GSM"
    ModelName "427d"
    Option "DPMS"
    EndSection

    Section "Device"
    ### Available Driver options are:-
    ### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # [i]
    #Option "AGPMode" # [i]
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # [i]
    #Option "GARTSize" # [i]
    #Option "RingSize" # [i]
    #Option "BufferSize" # [i]
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DRIReinit" # [<bool>]
    #Option "PanelOff" # [<bool>]
    #Option "DDCMode" # [<bool>]
    #Option "MonitorLayout" # [<str>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "UseFBDev" # [<bool>]
    #Option "VideoKey" # [i]
    #Option "MergedFB" # [<bool>]
    #Option "CRT2HSync" # [<str>]
    #Option "CRT2VRefresh" # [<str>]
    #Option "CRT2Position" # [<str>]
    #Option "MetaModes" # [<str>]
    #Option "MergedDPI" # [<str>]
    #Option "NoMergedXinerama" # [<bool>]
    #Option "MergedXineramaCRT2IsScreen0" # [<bool>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "DynamicClocks" # [<bool>]
    Identifier "Card0"
    # Driver "radeon"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "Unknown Board"
    BusID "PCI:1:5:0"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"

    Subsection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection

    Section "DRI"
    Mode 0666
    EndSection

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •