Find the answer to your Linux question:
Results 1 to 5 of 5
Hello everyone. I have this problem. I installed ubuntu 9.04 a long ago. I watched movies in a normal speed, it was ok. But i had 800x600 resolution, and i ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Newbie
    Join Date
    Nov 2009
    Posts
    104

    [SOLVED] problem with xorg.conf


    Hello everyone. I have this problem. I installed ubuntu 9.04 a long ago. I watched movies in a normal speed, it was ok. But i had 800x600 resolution, and i couldn't change the resolution to 1024x768, like i have in Windows. By seraching in the web, I've achieved to change an 1024x768 resolution. But got other problem. The movies reproduces very slowly, and the windows moves very slowly too. What can i do??

    This is the current xorg.conf file:

    Code:
    # File generated by xf86config.
    
    #
    # Copyright (c) 1999 by The XFree86 Project, Inc.
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # 
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # 
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # 
    # Except as contained in this notice, the name of the XFree86 Project shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from the
    # XFree86 Project.
    #
    
    # **********************************************************************
    # Refer to the XF86Config(4/5) man page for details about the format of 
    # this file.
    # **********************************************************************
    
    # NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
    # driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
    # this out to me. :)
    
    # This XF86Config file is designed for use with the VESA framebuffer.
    # This generic interface should work with nearly all video cards
    # (although not every card will support every resolution).
    
    # With the new driver, it should no longer be required to have frame buffer
    # support in the kernel, or to run it on the console.
    #
    # Enjoy! :)
    # -- volkerdi@slackware.com
    #
    
    # **********************************************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the font modules
        Load        "type1"
        Load        "freetype"
        #Load        "speedo"
    
    # This loads the GLX module
     #   Load       "glx"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # 
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    # 
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/cyrillic/"
        FontPath   "/usr/X11R6/lib/X11/fonts/TTF/"
    
    # ModulePath can be used to set a search path for the X server modules.
    # The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option     "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12).  This allows clients to receive these key
    # events.
    
    #    Option     "DontVTSwitch"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    #    Option     "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option     "DontZoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option     "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client.
    
    #    Option     "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    
    #    Option     "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option     "AllowNonLocalModInDev"
    
    # Set the basic blanking screen saver timeout.
    
    #    Option      "blank time"    "10"    # 10 minutes
    
    # Set the DPMS timeouts.  These are set here because they are global
    # rather than screen-specific.  These settings alone don't enable DPMS.
    # It is enabled per-screen (or per-monitor), and even then only when
    # the driver supports it.
    
    #    Option      "standby time"  "20"
    #    Option      "suspend time"  "30"
    #    Option      "off time"      "60"
    
    # On some platform the server needs to estimate the sizes of PCI
    # memory and pio ranges. This is done by assuming that PCI ranges
    # don't overlap. Some broken BIOSes tend to set ranges of inactive
    # devices wrong. Here one can adjust how aggressive the assumptions
    # should be. Default is 0.
    
    # Option   "EstimateSizesAggresively" "0"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
    # Set the keyboard auto repeat parameters.  Not all platforms implement
    # this.
    
    #    Option     "AutoRepeat"    "500 5"
    
    # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
    
    #    Option     "Xleds" "1 2 3"
    
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    
    #    Option     "XkbDisable"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a European
    # keyboard, you will probably want to use one of:
    #
    #    Option     "XkbModel"      "pc102"
    #    Option     "XkbModel"      "pc105"
    #
    # If you have a Microsoft Natural keyboard, you can use:
    #
    #    Option     "XkbModel"      "microsoft"
    #
    # If you have a US "windows" keyboard you will want:
    #
    #    Option     "XkbModel"      "pc104"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #
    #    Option     "XkbLayout"     "de"
    #
    # or:
    #
    #    Option     "XkbLayout"     "de"
    #    Option     "XkbVariant"    "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #
    #    Option     "XkbOptions"    "ctrl:swapcaps"
    
    
    # These are the default XKB settings for X.Org
    #
    #    Option     "XkbRules"      "xorg"
    #    Option     "XkbModel"      "pc101"
    #    Option     "XkbLayout"     "es"
    #    Option     "XkbVariant"    ""
    #    Option     "XkbOptions"    ""
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver	"mouse"
    
        Option	"ZAxisMapping" "4 5"
        Option	"Buttons" "3"
    
    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using a newer PnP mouse:
    
    #    Option     "Protocol"      "Auto"
    
    # The available mouse protocols types that you can set below are:
    #    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    #    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    #    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    #    ThinkingMouse ThinkingMousePS/2 Xqueue
        Option "Protocol"    "IMPS/2"
    
    # The mouse device.  The device is normally set to /dev/mouse,
    # which is usually a symbolic link to the real device.
    
        Option "Device"      "/dev/mouse"
    #   Option "Device"      "/dev/psaux"
    #   Option "Device"      "/dev/ttyS0"
    #   Option "Device"      "/dev/ttyS1"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"	"Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"		"9600"
    #    Option "SampleRate"	"150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    # Some examples of extended input devices
    
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "My Monitor"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   31.5 - 150.0
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 40-85
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    Section "Device"
        Identifier  "VESA Framebuffer"
        Driver      "vesa"
        #VideoRam    4096
        # Insert Clocks lines here if appropriate
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "VESA Framebuffer"
        Monitor     "My Monitor"
    
    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.
    
    #   DefaultDepth 8
    #   DefaultDepth 16
       DefaultDepth 24
    #   DefaultDepth 32
    
    # "1024x768" is also a conservative usable default resolution.  If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)
    
        Subsection "Display"
            Depth       8
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       32
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
    
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    and this is the originial xorg.conf file:

    Code:
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # Note that some configuration settings that could be done previously
    # in this file, now are automatically configured by the server and settings
    # here are ignored.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "Device"
    	Identifier	"Configured Video Device"
    EndSection
    
    Section "Monitor"
    	Identifier	"Configured Monitor"
    EndSection
    
    Section "Screen"
    	Identifier	"Default Screen"
    	Monitor		"Configured Monitor"
    	Device		"Configured Video Device"
    EndSection
    this is my video card (lspci | grep VGA)

    Code:
    00.0 VGA compatible controller: VIA Technologies, Inc. P4M890 [S3 UniChrome Pro] (rev 01)
    Please Help!!! Many thanks to all!!

  2. #2
    Linux Newbie lugoteehalt's Avatar
    Join Date
    Jan 2004
    Posts
    232
    All I can offer is my xorg.conf. There are several things in it which might help, but don't know. Render Acceleration looks sexy.
    Code:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder58)  Wed Dec  9 16:34:26 PST 2009
    
    # lugo put in next block.
    
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen         "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"    
    EndSection                                   
    
    Section "Files"
    # lugo added next line to try to get true type fonts from the Windows partition.
        FontPath   "unix/:7101"                                                     
        FontPath   "unix/:7100"                                                     
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/                                  
    EndSection                                                                      
    
    Section "Module"
        Load           "dbe"
        Load           "extmod"
        Load           "type1" 
        Load           "freetype"
        Load           "glx"     
        #lugo Put in next line 'in order to fully support video overlay coming from the tuner card'.
        Load           "v4l"                                                                        
    EndSection                                                                                      
    
    Section "ServerFlags"
        Option         "Xinerama" "0"
    EndSection                       
    
    Section "InputDevice"
    
        # generated from default
        Identifier     "Mouse0" 
        Driver         "mouse"  
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"  
    EndSection                               
    
    Section "InputDevice"
    
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"      
    EndSection                    
    
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown" 
        ModelName      "CRT-1"   
        DisplaySize     493    260
        HorizSync       31.5 - 47.8
        VertRefresh     60.0       
        ModeLine       "1360x768 +0+0" 82.98 1360 1400 1600 1736 768 770 772 808
        Option         "CalcAlgorithm" "UseFrameBufferTiming"                   
        Option         "DPMS"                                                   
    EndSection                                                                  
    
    Section "Device"
    
    # lugo put in next line.
        Identifier     "Device0"
        Driver         "nvidia" 
    # lugo put in next line to try to get suspend to ram.
        Option "NvAGP" "1"                               
        VendorName     "NVIDIA Corporation"              
        BoardName      "GeForce 8400 GS"                 
    EndSection                                           
    
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth   24
        Option         "TwinView" "0"
        Option         "metamodes" "1360x768 +0+0; 1280x768 +0+0; 800x600 +0+0; 640x480 +0+0"
        Option         "RenderAccel" "true"
        Option         "AddARGBGLXVisuals" "true"
        Option         "AllowGLXWithComposite" "true"
        Option         "TrippleBuffer" "true"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    
    Section "Extensions"
        Option         "Composite" "Enable"
    EndSection
    All power is violence; all power is evil.
    Money As Debt

  3. #3
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    You might try changing the driver to Openchrome.
    openchrome - Google Search
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  4. #4
    Linux Newbie
    Join Date
    Nov 2009
    Posts
    104
    Hey!! I solved it. Many thanks lugoteehalt, MikeTbob. Lugo, your xorg.conf din't work. Mike, i followed openchorme, but I got the original xorg.conf, so i couldn't get 1024x768. But then, i mixed parts of the both xorg.conf files. I add the HorizonSync and VertycalSync, and the possibility of others resolution. This is my current a succesfull xorg.conf file:
    Code:
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # Note that some configuration settings that could be done previously
    # in this file, now are automatically configured by the server and settings
    # here are ignored.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "Device"
    	Identifier	"Configured Video Device"
    EndSection
    
    Section "Monitor"
    
        Identifier  "My Monitor"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   48.4 - 60
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 60-75.03
    
    EndSection
    
    #Section "Monitor"
    #	Identifier	"Configured Monitor"
    #EndSection
    
    
    
    #Section "Screen"
    #	Identifier	"Default Screen"
    #	Monitor		"Configured Monitor"
    #	Device		"Configured Video Device"
    
    
    #EndSection
    
    Section "Screen"
        Identifier  "Screen 1"
        Device      "VESA Framebuffer"
        Monitor     "My Monitor"
    
    # If your card can handle it, a higher default color depth (like 24 or 32)
    # is highly recommended.
    
    #   DefaultDepth 8
    #   DefaultDepth 16
       DefaultDepth 24
    #   DefaultDepth 32
    
    # "1024x768" is also a conservative usable default resolution.  If you
    # have a better monitor, feel free to try resolutions such as
    # "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
    # card/monitor can produce)
    
        Subsection "Display"
            Depth       8
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
        Subsection "Display"
            Depth       32
            Modes "1024x768" "800x600" "640x480"
        EndSubsection
    
    EndSection
    Well, I love Linux, it's safer and faster than Windows. But this problem doesn't exsits in Windows. Why??
    Well, is there any way to label the post as "Solved"??

    Many thanks!!

  5. #5
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Quote Originally Posted by jesusitoLinux View Post
    Hey!! I solved it. Many thanks lugoteehalt, MikeTbob. Lugo, your xorg.conf din't work. Mike, i followed openchorme, but I got the original xorg.conf, so i couldn't get 1024x768. But then, i mixed parts of the both xorg.conf files. I add the HorizonSync and VertycalSync, and the possibility of others resolution. This is my current a succesfull xorg.conf file:

    Well, I love Linux, it's safer and faster than Windows. But this problem doesn't exsits in Windows. Why??
    Well, is there any way to label the post as "Solved"??

    Many thanks!!
    Good work!
    If you look at the top of this thread, you'll see a link titled "Thread tools", select "mark this thread as solved".
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •