Ubuntu 10.10, video SIS 661, can not set a normal resolution

[WapMorgan]

Conclusion lspci

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA *[SiS] (rev 01)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter

The contents of xorg.conf (created by "X-configure"), added by me highlighted red color

Section "ServerLayout"
Identifier * * "X.org Configured"
Screen * * *0 *"Screen0" 0 0
InputDevice * *"Mouse0" "CorePointer"
InputDevice * *"Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath * "/usr/lib/xorg/modules"
FontPath * * "/usr/share/fonts/X11/misc"
FontPath * * "/usr/share/fonts/X11/cyrillic"
FontPath * * "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath * * "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath * * "/usr/share/fonts/X11/Type1"
FontPath * * "/usr/share/fonts/X11/100dpi"
FontPath * * "/usr/share/fonts/X11/75dpi"
FontPath * * "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath * * "built-ins"
EndSection

Section "Module"
Load *"record"
Load *"glx"
Load *"dbe"
Load *"extmod"
Load *"dri2"
Load *"dri"
EndSection

Section "InputDevice"
Identifier *"Keyboard0"
Driver * * *"kbd"
EndSection

Section "InputDevice"
Identifier *"Mouse0"
Driver * * *"mouse"
Option * *"Protocol" "auto"
Option * *"Device" "/dev/input/mice"
Option * *"ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier * "Monitor0"
VendorName * "Monitor Vendor"
ModelName * *"Monitor Model"
* *Modeline "1280x1024_60.00" *108.88 *1280 1360 1496 1712 *1024 1025 1028 1060 *-HSync +Vsync
EndSection

Section "Device"
* * * *### Available Driver options are:-
* * * *### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
* * * *### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
* * * *### [arg]: arg optional
* * * *#Option * * "Accel" * * * * * * * # [<bool>]
* * * *#Option * * "AccelMethod" * * * * # <str>
* * * *#Option * * "TurboQueue" * * * * # [<bool>]
* * * *#Option * * "FastVram" * * * * * # [<bool>]
* * * *#Option * * "HostBus" * * * * * * # [<bool>]
* * * *#Option * * "RenderAcceleration" # [<bool>]
* * * *#Option * * "ForceCRT1Type" * * * # <str>
* * * *#Option * * "ForceCRT2Type" * * * # <str>
* * * *#Option * * "ShadowFB" * * * * * # [<bool>]
* * * *#Option * * "DRI" * * * * * * * * # [<bool>]
* * * *#Option * * "AGPSize" * * * * * * # <i>
* * * *#Option * * "GARTSize" * * * * * # <i>
* * * *#Option * * "Vesa" * * * * * * * # [<bool>]
* * * *#Option * * "MaxXFBMem" * * * * * # <i>
* * * *#Option * * "EnableSiSCtrl" * * * # [<bool>]
* * * *#Option * * "SWCursor" * * * * * # [<bool>]
* * * *#Option * * "HWCursor" * * * * * # [<bool>]
* * * *#Option * * "UseColorHWCursor" * # [<bool>]
* * * *#Option * * "Rotate" * * * * * * # <str>
* * * *#Option * * "Reflect" * * * * * * # <str>
* * * *#Option * * "Xvideo" * * * * * * # [<bool>]
* * * *#Option * * "InternalModes" * * * # [<bool>]
* * * *#Option * * "OverruleFrequencyRanges" # [<bool>]
* * * *#Option * * "RestoreBySetMode" * # [<bool>]
* * * *#Option * * "ForceCRT1" * * * * * # [<bool>]
* * * *#Option * * "XvOnCRT2" * * * * * # [<bool>]
* * * *#Option * * "PanelDelayCompensation" # <i>
* * * *#Option * * "PDC" * * * * * * * * # <i>
* * * *#Option * * "PanelDelayCompensation2" # <i>
* * * *#Option * * "PDC2" * * * * * * * # <i>
* * * *#Option * * "PanelDelayCompensation1" # <i>
* * * *#Option * * "PDC1" * * * * * * * # <i>
* * * *#Option * * "EMI" * * * * * * * * # <i>
* * * *#Option * * "LVDSHL" * * * * * * # <i>
* * * *#Option * * "ForcePanelRGB" * * * # <i>
* * * *#Option * * "SpecialTiming" * * * # <str>
* * * *#Option * * "TVStandard" * * * * # <str>
* * * *#Option * * "UseROMData" * * * * # [<bool>]
* * * *#Option * * "UseOEMData" * * * * # [<bool>]
* * * *#Option * * "YV12" * * * * * * * # [<bool>]
* * * *#Option * * "CHTVType" * * * * * # [<bool>]
* * * *#Option * * "CHTVOverscan" * * * # [<bool>]
* * * *#Option * * "CHTVSuperOverscan" * # [<bool>]
* * * *#Option * * "CHTVLumaBandwidthCVBS" # <i>
* * * *#Option * * "CHTVLumaBandwidthSVIDEO" # <i>
* * * *#Option * * "CHTVLumaFlickerFilter" # <i>
* * * *#Option * * "CHTVChromaBandwidth" # <i>
* * * *#Option * * "CHTVChromaFlickerFilter" # <i>
* * * *#Option * * "CHTVCVBSColor" * * * # [<bool>]
* * * *#Option * * "CHTVTextEnhance" * * # <i>
* * * *#Option * * "CHTVContrast" * * * # <i>
* * * *#Option * * "SISTVEdgeEnhance" * # <i>
* * * *#Option * * "SISTVAntiFlicker" * # <str>
* * * *#Option * * "SISTVSaturation" * * # <i>
* * * *#Option * * "SISTVCFilter" * * * # [<bool>]
* * * *#Option * * "SISTVYFilter" * * * # <i>
* * * *#Option * * "SISTVColorCalibFine" # <i>
* * * *#Option * * "SISTVColorCalibCoarse" # <i>
* * * *#Option * * "SISTVXScale" * * * * # <i>
* * * *#Option * * "SISTVYScale" * * * * # <i>
* * * *#Option * * "TVXPosOffset" * * * # <i>
* * * *#Option * * "TVYPosOffset" * * * # <i>
* * * *#Option * * "SIS6326TVAntiFlicker" # <str>
* * * *#Option * * "SIS6326TVEnableYFilter" # [<bool>]
* * * *#Option * * "SIS6326TVYFilterStrong" # [<bool>]
* * * *#Option * * "SIS6326TVForcePlug" # <str>
* * * *#Option * * "SIS6326FSCAdjust" * # <i>
* * * *#Option * * "YPbPrAspectRatio" * # <str>
* * * *#Option * * "TVBlueWorkAround" * # [<bool>]
* * * *#Option * * "ColorHWCursorBlending" # [<bool>]
* * * *#Option * * "ColorHWCursorBlendThreshold" # <i>
* * * *#Option * * "CRT2Detection" * * * # [<bool>]
* * * *#Option * * "ForceCRT2ReDetection" # [<bool>]
* * * *#Option * * "SenseYPbPr" * * * * # [<bool>]
* * * *#Option * * "CRT1Gamma" * * * * * # [<bool>]
* * * *#Option * * "CRT2Gamma" * * * * * # [<str>]
* * * *#Option * * "GammaBrightness" * * # <str>
* * * *#Option * * "GammaBrightnessCRT2" # <str>
* * * *#Option * * "CRT2GammaBrightness" # <str>
* * * *#Option * * "Brightness" * * * * # <str>
* * * *#Option * * "NewGammaBrightness" # <str>
* * * *#Option * * "CRT2Brightness" * * # <str>
* * * *#Option * * "CRT2NewGammaBrightness" # <str>
* * * *#Option * * "Contrast" * * * * * # <str>
* * * *#Option * * "NewGammaContrast" * # <str>
* * * *#Option * * "CRT2Contrast" * * * # <str>
* * * *#Option * * "CRT2NewGammaContrast" # <str>
* * * *#Option * * "CRT1Saturation" * * # <i>
* * * *#Option * * "XvGamma" * * * * * * # [<str>]
* * * *#Option * * "XvDefaultContrast" * # <i>
* * * *#Option * * "XvDefaultBrightness" # <i>
* * * *#Option * * "XvDefaultHue" * * * # <i>
* * * *#Option * * "XvDefaultSaturation" # <i>
* * * *#Option * * "XvDefaultDisableGfx" # [<bool>]
* * * *#Option * * "XvDefaultDisableGfxLR" # [<bool>]
* * * *#Option * * "XvChromaMin" * * * * # <i>
* * * *#Option * * "XvChromaMax" * * * * # <i>
* * * *#Option * * "XvUseChromaKey" * * # [<bool>]
* * * *#Option * * "XvInsideChromaKey" * # [<bool>]
* * * *#Option * * "XvYUVChromaKey" * * # [<bool>]
* * * *#Option * * "XvDisableColorKey" * # [<bool>]
* * * *#Option * * "XvUseMemcpy" * * * * # [<bool>]
* * * *#Option * * "BenchmarkMemcpy" * * # [<bool>]
* * * *#Option * * "UseSSE" * * * * * * # [<bool>]
* * * *#Option * * "XvDefaultAdaptor" * # <str>
* * * *#Option * * "ScaleLCD" * * * * * # [<bool>]
* * * *#Option * * "CenterLCD" * * * * * # [<bool>]
* * * *#Option * * "EnableHotkey" * * * # [<bool>]
* * * *#Option * * "ForceCRT1VGAAspect" # <str>
* * * *#Option * * "ForceCRT2VGAAspect" # <str>
* * * *#Option * * "MergedFB" * * * * * # [<str>]
* * * *#Option * * "TwinView" * * * * * # [<str>]
* * * *#Option * * "MergedFBAuto" * * * # [<bool>]
* * * *#Option * * "CRT2HSync" * * * * * # <str>
* * * *#Option * * "SecondMonitorHorizSync" # <str>
* * * *#Option * * "CRT2VRefresh" * * * # <str>
* * * *#Option * * "SecondMonitorVertRefresh" # <str>
* * * *#Option * * "CRT2Position" * * * # <str>
* * * *#Option * * "TwinViewOrientation" # <str>
* * * *#Option * * "MetaModes" * * * * * # <str>
* * * *#Option * * "MergedDPI" * * * * * # <str>
* * * *#Option * * "MergedXinerama" * * # [<bool>]
* * * *#Option * * "TwinviewXineramaInfo" # [<bool>]
* * * *#Option * * "MergedXineramaCRT2IsScreen0" # [<bool>]
* * * *#Option * * "MergedNonRectangular" # [<bool>]
* * * *#Option * * "MergedMouseRestriction" # [<bool>]
Identifier *"Card0"
Driver * * *"sis"
VendorName *"Silicon Integrated Systems [SiS]"
BoardName * "661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
BusID * * * "PCI:1:0:0"
EndSection

Section "Screen"
* *DefaultDepth 24
Identifier "Screen0"
Device * * "Card0"
Monitor * *"Monitor0"

SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 1
EndSubSection
SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 4
EndSubSection
SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 8
EndSubSection
SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 15
EndSubSection
SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 16
EndSubSection
SubSection "Display"
Viewport * 0 0
* * * *Modes "1280x1024" "1024x768" "800x600" "640x480"
Depth * * 24
EndSubSection
EndSection

Item Modeline generated by the utility gtf (gtf 1280 1024 60).

Tried many ways but nothing comes out.

In the permissions list only from 320x240 to 800x600.

Attach a dump of information about iron, made the program PC wizard.

[WapMorgan]

UPD: got to add the resolution 1280x1024 @ 60 (Dances with xrandr helped), but here the choice of permit is issued:

Could not apply the selected configuration of monitors.
Unable to set the configuration of the controller CTR 248

Through tests, it was found that the higher resolution 800x600 can not be established.


UPD: xrandr-q gives

Screen 0: minimum 320 x 240, current 800 x 600, maximum 1280 x 1024
default connected 800x600 +0 +0 0mm x 0mm
  800x600 60.0 * 56.0
  640x480 60.0
  768x576 60.0
  720x576 60.0
  800x480 60.0
  720x480 61.0
  400x300 60.0
  320x240 61.0
  1280x1024_60.00 59.9
  1024x768_60.00 59.4
  800x600_75.00 74.9
  1152x768_60.00 59.2
  808x601_60.00 58.9

UPD: system installed packages:
xserver-xorg-video-sisusb version 1:0.9.3-1
xserver-xorg-video-sis version 1:0.10.2-2


Ask for help from the Linux community.

P.S: I am Russian speaking users used the Google translator, so they can be inaccurate, sorry.

[WapMorgan]

problem was solved