Find the answer to your Linux question:
Results 1 to 7 of 7
Hello, I am trying to get Linux working and working with Linux (after several failed attempts), by now all have been quite easy and it works almost ok (thanks debconf). ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Apr 2004
    Location
    Santiago, Chile
    Posts
    12

    Memory problem with xfree86


    Hello, I am trying to get Linux working and working with Linux (after several failed attempts), by now all have been quite easy and it works almost ok (thanks debconf). But I have this problem with Xfree86: cant get it to work above 640x480 at 16bit color.

    In Windows, the screen have the following modes: 24bit=1024x768,800x600,640x480; 16bit=800x600,640x480; and 8bit, 640x480.

    Now if I start X at 16bit, it gives me the 640x480 mode, claiming that at 800x600 there is "insufficient memory given virtual size". I can get 800x600 at 8bit ; also, I can not get a virtual of 800x600 at 16bit in 640x480.

    Things I have done:
    -- Increased VideoRam to 2 megs, result: it works but the screen "melts", it displays it very weird.
    -- Changed the hsync and vrefresh rates with several different numbers, didnt work.
    -- Upgraded from XF86 4.3 to 4.4: nada.
    -- Specified modelines in XF86config: again nothing.
    -- Tried another card (S3Virge): zero.
    -- Crawled the entire web, including this site: tried some of the quasi-solutions, the above said among them, with same results.

    Am I missing something? Anyone has maybe at least a clue of what should I do or where to go, what direction should I take? I will be very grateful of any advice an input. Many thanks in advance,

    Alvaro Medina

  2. #2
    Linux Enthusiast Opnosforatou's Avatar
    Join Date
    Dec 2003
    Location
    Vleuten, The Netherlands
    Posts
    552
    Post you XF86Config and you videocart and monitor specs.
    Drop out of X and remove the .log files and start and stop X windows ...
    Look in the X logfiles for output about screen and videocart and paste it here...
    ---[ MS09-99896 - Vulnerability in All MS Windows OS ; Using Windows Could Allow Remote Code Execution. ]---
    Hardware: Asus P4P800, 1GB, P4-3Ghz, Asus V9950, Maxtor ATA HD\'s, 3Com GBit lan, Audigy ZS Plat.

  3. #3
    Just Joined!
    Join Date
    Apr 2004
    Location
    Santiago, Chile
    Posts
    12
    Card: Trident TGUI9680-1, supposedly with 2megs of RAM, others say 1meg...

    Monitor: Markvision JD143H - hsync: 29.5-38khz ; vrefresh: 48-90 hz ; Resol: VGA, SuperVGA, 8514A, 1024x768, non-interlaced ; display colors: unlimited

    XF86config
    -------------
    # File generated by xf86config.

    [blahblah]

    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "speedo"
    Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"

    EndSection

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
    # FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Core keyboard's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "Keyboard"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc102"
    Option "XkbLayout" "es"

    EndSection


    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/psaux"

    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection


    # ************************************************** ********************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # ************************************************** ********************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "Markvision JD143H (test)"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    #Modeline "800x600@57" 36.00 800 832 968 1000 600 612 618 631

    HorizSync 31.5-35.1 #30-36

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70 #48-57

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    # VideoRam 256

    # Clocks 25.2 28.3

    EndSection

    # Device configured by xf86config:

    Section "Device"
    Identifier "Trident TGUI9680 (generic)"
    Driver "trident"
    #VideoRam 2048
    # Insert Clocks lines here if appropriate
    EndSection


    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "Trident TGUI9680 (generic)"
    Monitor "Markvision JD143H (test)"
    DefaultDepth 16

    Subsection "Display"
    Depth 8
    Modes "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "800x600" "640x480"
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection

    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection

    # Section "DRI"
    # Mode 0666
    # EndSection
    ---------------------------------

    XFree86.0.log (i dont understand very well what are the important parts, so I paste it all...)


    XFree86 Version 4.4.0
    Release Date: 29 February 2004
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.18-14 i686 [ELF]
    Current Operating System: Linux nexus 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686
    Build Date: 27 February 2004
    Changelog Date: 29 February 2004
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 2 04:37:34 2004
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Markvision JD143H (test)"
    (**) | |-->Device "Trident TGUI9680 (generic)"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc102"
    (**) XKB: model: "pc102"
    (**) Option "XkbLayout" "es"
    (**) XKB: layout: "es"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.7
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (++) using VT number 7

    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
    (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
    (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
    (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
    (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
    (II) PCI: 00:09:0: chip 1106,3106 card 1186,1403 rev 86 class 02,00,00 hdr 00
    (II) PCI: 00:0a:0: chip 1023,9660 card 0000,0000 rev d3 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared)
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(0:10:0) Trident Microsystems TGUI 9660/938x/968x rev 211, Mem @ 0xe2800000/22, 0xe2000000/16, BIOS @ 0x000c0000/16
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [1] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [3] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [4] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [5] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [7] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [1] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [2] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [3] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [4] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [5] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [7] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [6] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [8] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [9] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [14] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "speedo"
    (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
    (II) Module speedo: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Speedo
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
    (II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
    compiled for 4.4.0, module version = 2.1.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "trident"
    (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o
    (II) Module trident: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.7
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
    tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
    cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
    tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
    cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
    cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
    cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4
    (II) Primary Device is: PCI 00:0a:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset tgui9660 found
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [6] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [8] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [9] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [12] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [14] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    (II) resource ranges after probing:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [6] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [8] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [9] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    [18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (==) TRIDENT(0): RGB weight 565
    (==) TRIDENT(0): Default visual is TrueColor
    (==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) TRIDENT(0): Linear framebuffer at 0xE2800000
    (--) TRIDENT(0): IO registers at 0xE2000000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/X11R6/lib/modules/libvbe.a
    (II) Module vbe: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) TRIDENT(0): initializing int10
    (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
    (II) TRIDENT(0): VESA BIOS detected
    (II) TRIDENT(0): VESA VBE Version 1.2
    (II) TRIDENT(0): VESA VBE Total Mem: 1024 kB
    (II) TRIDENT(0): VESA VBE OEM: Trident TGUI96xx
    (--) TRIDENT(0): Revision is 1
    (--) TRIDENT(0): Found TGUI9680 chip
    (--) TRIDENT(0): RAM type is EDO Ram
    (--) TRIDENT(0): Using HW cursor
    (--) TRIDENT(0): VideoRAM: 1024 kByte
    (--) TRIDENT(0): Memory Clock is 40.91 MHz
    (==) TRIDENT(0): Min pixel clock is 12 MHz
    (--) TRIDENT(0): Max pixel clock is 90 MHz
    (II) TRIDENT(0): Markvision JD143H (test): Using hsync range of 31.50-35.10 kHz
    (II) TRIDENT(0): Markvision JD143H (test): Using vrefresh range of 50.00-70.00 Hz
    (II) TRIDENT(0): Clock range: 12.00 to 90.00 MHz
    (II) TRIDENT(0): Not using default mode "640x350" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "640x400" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "720x400" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1152x864" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "896x672" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "896x672" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "928x696" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "928x696" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "832x624" (hsync out of range)
    (II) TRIDENT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1152x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1600x1024" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
    (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "960x720" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "1024x768" (insufficient memory for mode)
    (II) TRIDENT(0): Not using default mode "800x600" (insufficient memory given virtual size)
    (--) TRIDENT(0): Virtual size is 640x480 (pitch 1024)
    (**) TRIDENT(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
    (II) TRIDENT(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
    (++) TRIDENT(0): DPI set to (100, 100)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.1.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.4.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.7
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xe2000000 - 0xe200ffff (0x10000) MX[B]
    [1] 0 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B]
    [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B]
    [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -1 0 0xe3000000 - 0xe30000ff (0x100) MX[B]
    [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]O
    [9] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B)
    [10] -1 0 0xe2000000 - 0xe200ffff (0x10000) MX[B](B)
    [11] -1 0 0xe2800000 - 0xe2bfffff (0x400000) MX[B](B)
    [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
    [19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
    [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (==) TRIDENT(0): Write-combining range (0xe2800000,0x100000)
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
    (II) TRIDENT(0): Initializing int10
    (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
    (II) TRIDENT(0): Found Clock 25.20 n=36 m=23 k=0
    (II) TRIDENT(0): Using 32 scanlines of offscreen memory for area's
    (II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    9 128x128 slots
    32 8x8 color expansion slots
    (==) TRIDENT(0): Backing store disabled
    (==) TRIDENT(0): Silken mouse enabled
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (**) Option "Protocol" "PS/2"
    (**) Mouse1: Device: "/dev/psaux"
    (**) Mouse1: Protocol: "PS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/psaux"
    (**) Option "Emulate3Buttons"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (==) Mouse1: Buttons: 3
    (II) Keyboard "Keyboard1" handled by legacy driver
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!

  4. #4
    Linux Enthusiast Opnosforatou's Avatar
    Join Date
    Dec 2003
    Location
    Vleuten, The Netherlands
    Posts
    552
    Try this config... and let me know:

    I'm not sure if you card works with the GLX. I enabled it.. If it fails on it, just disable the line.

    Code:
    # File generated by Opnosforatou as requested on Linuxforums.org
    
    
    # **********************************************************************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "freetype"
    
    # This loads the GLX module
        Load       "glx"
    
    EndSection
    
    
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension &#40;like ".txt" or ".db"&#41;. There is normally
    # no need to change the default.
    
    RgbPath "/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed &#40;which are concatenated together&#41;,
    # as well as specifying multiple comma-separated entries in one FontPath
    # command &#40;or a combination of both methods&#41;
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list &#40;or comment them out&#41;.
    #
    
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/&#58;unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/&#58;unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path. The default path is shown here.
    
    # ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    # Option "NoTrapSignals"
    
    # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
    # &#40;where n is 1 through 12&#41;. This allows clients to receive these key
    # events.
    
    # Option "DontVTSwitch"
    
    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    
    # Option "DontZap"
    
    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    
    # Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    # Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client.
    
    # Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # &#40;mouse and keyboard&#41; settings.
    
    # Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings &#40;currently only xset&#41;.
    
    # Option "AllowNonLocalModInDev"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    Identifier "Keyboard1"
    Driver "Keyboard"
    
    # For most OSs the protocol can be omitted &#40;it defaults to "Standard"&#41;.
    # When using XQUEUE &#40;only for SVR3 and SVR4, but not Solaris&#41;,
    # uncomment the following line.
    
    # Option "Protocol" "Xqueue"
    
    Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled &#40;eg, with xset&#40;1&#41;&#41;
    # Option "Xleds" "1 2 3"
    
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below &#40;which are the defaults&#41;. For example, for a non-U.S.
    # keyboard, you will probably want to use&#58;
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use&#58;
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with&#58;
    # Option "XkbLayout" "de"
    # or&#58;
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use&#58;
    # Option "XkbOptions" "ctrl&#58;swapcaps"
    
    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    
    # Option "XkbDisable"
    
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc102"
    Option "XkbLayout" "es"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/psaux"
    
    # Mouse-speed setting for PS/2 mouse.
    
    # Option "Resolution" "256"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    # Option "Protocol" "Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds &#40;default is 50ms&#41;
    
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    # Option "ChordMiddle"
    
    EndSection
    
    
    # **********************************************************************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # **********************************************************************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
    Identifier "Markvision JD143H"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE&#58; THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    #
    # If you can find the modeline for the screenres of 1024x768, include it.
    # 
    
    Modeline "800x600@57" 36.00 800 832 968 1000 600 612 618 631
    Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
    
    HorizSync 29.5-38
    
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE&#58; THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
    VertRefresh 48-90 
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device&#58;
    
    Section "Device"
    Identifier "Trident TGUI9680"
    VendorName "Trident"
    BoardName "TGUI9680"
    
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    # Chipset "generic"
    
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
    # PLay with the two to see what gives best result.
    #Driver "vga"
    Driver "trident"
    
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    
    # BusID "PCI&#58;0&#58;10&#58;0"
    
    # VideoRam 256
    # VideoRam 2048
    
    # Clocks 25.2 28.3
    
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "Trident TGUI9680"
    Monitor "Markvision JD143H"
    DefaultDepth 24
    
    EndSubsection
        Subsection "Display"
            Depth       8
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
    Identifier "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    
    Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    # Mode 0666
    # EndSection
    ---[ MS09-99896 - Vulnerability in All MS Windows OS ; Using Windows Could Allow Remote Code Execution. ]---
    Hardware: Asus P4P800, 1GB, P4-3Ghz, Asus V9950, Maxtor ATA HD\'s, 3Com GBit lan, Audigy ZS Plat.

  5. #5
    Linux Enthusiast Opnosforatou's Avatar
    Join Date
    Dec 2003
    Location
    Vleuten, The Netherlands
    Posts
    552
    Try this config... and let me know:

    I'm not sure if you card works with the GLX. I enabled it.. If it fails on it, just disable the line.

    Code:
    # File generated by Opnosforatou as requested on Linuxforums.org
    
    
    # **********************************************************************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # **********************************************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "freetype"
    
    # This loads the GLX module
        Load       "glx"
    
    EndSection
    
    
    # **********************************************************************
    # Files section. This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
    RgbPath "/usr/X11R6/lib/X11/rgb"
        FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/&#58;unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/&#58;unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path. The default path is shown here.
    # ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # **********************************************************************
    # Server flags section.
    # **********************************************************************
    
    Section "ServerFlags"
    
    EndSection
    
    # **********************************************************************
    # Input devices
    # **********************************************************************
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    Identifier "Keyboard1"
    Driver "Keyboard"
    
    # For most OSs the protocol can be omitted &#40;it defaults to "Standard"&#41;.
    # When using XQUEUE &#40;only for SVR3 and SVR4, but not Solaris&#41;,
    # uncomment the following line.
    
    # Option "Protocol" "Xqueue"
    
    Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled &#40;eg, with xset&#40;1&#41;&#41;
    # Option "Xleds" "1 2 3"
    
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below &#40;which are the defaults&#41;. For example, for a non-U.S.
    # keyboard, you will probably want to use&#58;
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use&#58;
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with&#58;
    # Option "XkbLayout" "de"
    # or&#58;
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use&#58;
    # Option "XkbOptions" "ctrl&#58;swapcaps"
    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc102"
    Option "XkbLayout" "es"
    
    EndSection
    
    **********************************************************************
    # Core Pointer's InputDevice section
    **********************************************************************
    
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "PS/2"
    Option "Device" "/dev/psaux"
    # Option "Resolution" "256"
    # Option "Protocol" "Xqueue"
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # Option "ChordMiddle"
    EndSection
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
    Identifier "Markvision JD143H"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE&#58; THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    #
    # If you can find the modeline for the screenres of 1024x768, include it.
    # 
    
    Modeline "800x600@57" 36.00 800 832 968 1000 600 612 618 631
    Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
    
    HorizSync 29.5-38
    
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE&#58; THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 48-90 
    
    EndSection
    # **********************************************************************
    # Graphics device section
    **********************************************************************
    Section "Device"
    Identifier "Trident TGUI9680"
    VendorName "Trident"
    BoardName "TGUI9680"
    # Chipset "generic"
    # PLay with the two to see what gives best result.
    #Driver "vga"
    Driver "trident"
    # BusID "PCI&#58;0&#58;10&#58;0"
    # VideoRam 256
    # VideoRam 2048
    # Clocks 25.2 28.3
    
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    Section "Screen"
    Identifier "Screen 1"
    Device "Trident TGUI9680"
    Monitor "Markvision JD143H"
    DefaultDepth 24
    
    EndSubsection
        Subsection "Display"
            Depth       8
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1024x768" "800x600@57" "640x480" 
            ViewPort    0 0
    		Virtual 1024 768
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    *********************************************************************
    Section "ServerLayout"
    
    Identifier "Simple Layout"
    
    Screen "Screen 1"
    
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    # Mode 0666
    # EndSection
    ---[ MS09-99896 - Vulnerability in All MS Windows OS ; Using Windows Could Allow Remote Code Execution. ]---
    Hardware: Asus P4P800, 1GB, P4-3Ghz, Asus V9950, Maxtor ATA HD\'s, 3Com GBit lan, Audigy ZS Plat.

  6. #6
    Just Joined!
    Join Date
    Apr 2004
    Location
    Santiago, Chile
    Posts
    12
    Many thanks, but unfortunately, it didnt work. I of course tweaked some of the parameters looking for a solution, tested with the two devices, etc.

    One odd thing is that at 8bit, 1024x768 actually worked. But at 16bit and 800x600, X quitted again with the "insufficient memory" message.

    I just cant get why this happens, having the same card worked at 800x600x16bit both in Windows and previous installs of Linux. One thing wort to mention is that in those installs I was using xf86 3. something, and now I use 4.4.

    Thanks anyway; I look forward for your comments. Regards,
    Alvaro Medina G.

  7. #7
    Just Joined!
    Join Date
    Apr 2004
    Location
    Santiago, Chile
    Posts
    12
    Solved! I changed the driver in the device section of XF86Config to "VESA" and now its all OK. It didnt even complainted!

    I must say this works, at least with my machine, only in XFree86 4.4. I had already tested the "vesa" driver solution with 4.1 and 4.3 to no avail, the screen "melted" right as when I out 2megs for Trident driver in this version.

    Thanks and I hope many others can profit of this solution. Regards,
    Alvaro Medina G.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •