jna31415

Running Slackware 12.2 with 2.6.27 kernel. Brand new ASUS K50ij-RX05.

lspci tells me that my audio device is:

alsaconf agrees. I can run alsaconf just fine, and I can run alsamixer, where I get a bar labeled Master and a bar labeled PCM. Contrary to how others have described AlsaMixer according to Google, I cannot seem to change anything by pressing the 'm' key, but my left and right arrows move between the Master and PCM columns, and I can adjust the lengths of the bars between 0 and 100.

My module for sound seems to be snd_hda_intel, and I have heard that to make that work, I need to modify the file /etc/modprobe.d/sound, so I tried three different new lines for the file, each time adding the line and rebooting my system.

options snd-hda-intel model=XXX

I tried basic, ultra, and 3stack for the XXX in that line.

Normally, when I run something like Xmms, the program looks like it's playing music even though I get no sound, but each time I reboot after changing /etc/modprobe.d/sound, the program gives me an unhelpful error message, which then disappears if I change the output plugin for Xmms, though that doesn't make sound play, either.

If I run alsaconf again, /etc/modprobe.d/sound reverts back to two lines:

Any ideas on what to try next?

gogalthorp

When you run alsaconf do you hear the test music??

Segfault

Run aplay -l (its lowercase L) to see what chip you have. Then Google for that chip in conjunction with ALSA. Certain versions of ALSA having bugs affecting certain chips is not that unusual.

jna31415

When I run alsaconf, I do not hear any test music.

aplay -l results:

cat /proc/asound/card0/codec#0 | grep Codec result:

Segfault

There is VIA support under Intel HDA. Maybe it's not enabled in your kernel configuration?

jna31415

Below, I have the output from lspci -vvnn and cat /proc/asound/card*/codec#*

I noticed on lspci that :

Is this a problem? I remember something similar from when I was trying to get my wireless connection to work (and updating the pci.ids file and making sure I was using Ath9k driver seemed to help there, though I am not entirely sure everything is working on that yet.)

If the problem is kernel configuration, I don't really know where to begin fixing that.


Here is /proc/asound/card*/codec#*:

Codec: VIA ID 397
Address: 0
Vendor Id: 0x11060397
Subsystem Id: 0x10431111
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x22 0x22]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x1d 0x1d]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x08 0x08] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x082334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19038: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x8
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x082334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x418130f9: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0xf, Sequence = 0x9
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081001c: OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x90070110: [Fixed] Line Out at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0820: IN
Pin Default 0x593701f7: [N/A] CD at Int ATAPI
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x25


I stupidly just posted /proc/asound/card0/codec#* last time, I think.

Also, from lspci -vvnn:

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Santa Cruz Operation Unknown device [1111:1043]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2b- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdef4000 (64-bit, non-prefetchable) [size=16k]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1 D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0- DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unkonwn, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

Segfault

Well, I don't like this Santa Cruz Operation Unknown device [1111:1043] thing.

Maybe you should open an ALSA bug.

http://git.alsa-project.org/?p=alsa-...s/alsa-info.sh
This script collects ALSA info from your computer for reporting a problem.

sarlacii

I'm running PClinuxOS with kernel 2.6.26.8.tex3 #1 SMP. I have a similar sound card:

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)

And the driver is also the snd_hda_intel one. I have the following dmesg error in my case:

hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...

Which results in a working config and snd card. Go figure.

So I would venture that the suggestion of checking the support for your particular version of card is best... the driver is correct for your card, but support looks buggy.

Good luck mate.

jna31415

If the problem is support, what would I do about that? I am a little too new to this to know off of the top of my head. If it wouldn't take long to say, telling me might save me another day of searching the internet for a solution. Thank you for your time, in any case.

From running the also-info script (and please note that I do not have internet working on my Linux-running laptop yet, so it could not fix any problems by downloading anything--I am typing this on a different computer):


upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.57
!!################################

!!Script ran on: Wed Jul 29 20:59:01 UTC 2009


!!Linux Distribution
!!------------------

Slackware 12.2.0


!!DMI Information
!!---------------

Manufacturer: ASUSTeK Computer Inc.
Product Name: K50IJ


!!Kernel Information
!!------------------

Kernel release: 2.6.27.7-smp
Operating System: GNU/Linux
Architecture: i686
Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz
SMP Enabled: Yes


!!ALSA Version
!!------------

Driver version: 1.0.17
Library version: 1.0.17a
Utilities version: 1.0.17


!!Loaded ALSA modules
!!-------------------

snd_hda_intel


!!Sound Servers on this system
!!----------------------------

ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No

aRts:
Installed - Yes (/usr/bin/artsd)
Running - Yes


!!Soundcards recognised by ALSA
!!-----------------------------

0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfdef4000 irq 22


!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)


!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------

00:1b.0 0403: 8086:293e (rev 03)
Subsystem: 1111:1043


!!Modprobe options (Sound related)
!!--------------------------------

snd-hda-intel: model=asus


!!Loaded sound module options
!!--------------------------

!!Module: snd_hda_intel
bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,< NULL>
index : -1,-1,-1,-1,-1,-1,-1,-1
model : asus,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NU LL>
position_fix : 0,0,0,0,0,0,0,0
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1
single_cmd : N


!!HDA-Intel Codec information
!!---------------------------
--startcollapse--

Codec: VIA ID 397
Address: 0
Vendor Id: 0x11060397
Subsystem Id: 0x10431111
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x22 0x22]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x14 0x14]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x8b 0x8b]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x08 0x08] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x082334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19038: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x8
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x082334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x418130f9: [N/A] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0xf, Sequence = 0x9
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081001c: OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x90070110: [Fixed] Line Out at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x0820: IN
Pin Default 0x593701f7: [N/A] CD at Int ATAPI
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0814: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power: setting=D0, actual=D0
Connection: 1
0x25
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116, 0 Jul 29 10:51 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 4 Jul 29 10:51 /dev/snd/hwC0D0
crw-rw---- 1 root audio 116, 24 Jul 29 10:51 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 16 Jul 29 15:55 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 1 Jul 29 15:51 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Jul 29 10:51 /dev/snd/timer


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

pcm.headset {
type bluetooth
}

ctl.headset {
type bluetooth
}


!!Aplay/Arecord output
!!------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [Intel]

Card hw:0 'Intel'/'HDA Intel at 0xfdef4000 irq 22'
Mixer name : 'VIA ID 397'
Components : 'HDA:11060397'
Controls : 4
Simple ctrls : 3
Simple mixer control 'Master',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 34 [81%] [-12.00dB]
Front Right: Playback 34 [81%] [-12.00dB]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 20 [65%] [13.50dB] [on]
Front Right: Capture 20 [65%] [13.50dB] [on]


!!Alsactl output
!!-------------

--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -1650
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 20
value.1 20
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 42'
comment.dbmin -6300
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value.0 34
value.1 34
}
control.4 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
}
}
--endcollapse--


!!All Loaded Modules
!!------------------

Module
snd_seq_dummy
snd_seq_oss
snd_seq_midi_event
snd_seq
snd_seq_device
snd_pcm_oss
snd_mixer_oss
ipv6
pcmcia
pcmcia_core
lp
ppdev
parport_pc
parport
fuse
snd_hda_intel
snd_pcm
intel_agp
snd_timer
snd_page_alloc
snd_hwdep
agpgart
asus_laptop
led_class
snd
uvcvideo
compat_ioctl32
atl1e
videodev
soundcore
evdev
v4l1_compat
psmouse
ac
thermal
sg
battery
button
processor
serio_raw
video
thermal_sys
hwmon
output


!!ALSA/HDA dmesg
!!------------------

agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
Clocksource tsc unstable (delta = -140980351 ns)

Segfault

Well, what I meant is you should go to Main Page - AlsaProject . Lots of useful information there. In Advanced ALSA Users section you can click on 'I found a bug!', create a new account and report your problem. You can search the bugs, too, to see if something useful pops up.