Find the answer to your Linux question:
Results 1 to 10 of 10
Running Slackware 12.2 with 2.6.27 kernel. Brand new ASUS K50ij-RX05. lspci tells me that my audio device is: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Jul 2009
    Posts
    12

    I hate to say this, but it's anoter thread about there being no sound


    Running Slackware 12.2 with 2.6.27 kernel. Brand new ASUS K50ij-RX05.

    lspci tells me that my audio device is:

    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    alsaconf agrees. I can run alsaconf just fine, and I can run alsamixer, where I get a bar labeled Master and a bar labeled PCM. Contrary to how others have described AlsaMixer according to Google, I cannot seem to change anything by pressing the 'm' key, but my left and right arrows move between the Master and PCM columns, and I can adjust the lengths of the bars between 0 and 100.

    My module for sound seems to be snd_hda_intel, and I have heard that to make that work, I need to modify the file /etc/modprobe.d/sound, so I tried three different new lines for the file, each time adding the line and rebooting my system.

    options snd-hda-intel model=XXX

    I tried basic, ultra, and 3stack for the XXX in that line.

    Normally, when I run something like Xmms, the program looks like it's playing music even though I get no sound, but each time I reboot after changing /etc/modprobe.d/sound, the program gives me an unhelpful error message, which then disappears if I change the output plugin for Xmms, though that doesn't make sound play, either.

    If I run alsaconf again, /etc/modprobe.d/sound reverts back to two lines:

    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Any ideas on what to try next?

  2. #2
    Linux Guru gogalthorp's Avatar
    Join Date
    Oct 2006
    Location
    West (by God) Virginia
    Posts
    3,104
    When you run alsaconf do you hear the test music??

  3. #3
    Linux Engineer Segfault's Avatar
    Join Date
    Jun 2008
    Location
    Acadiana
    Posts
    877
    Run aplay -l (its lowercase L) to see what chip you have. Then Google for that chip in conjunction with ALSA. Certain versions of ALSA having bugs affecting certain chips is not that unusual.

  4. #4
    Just Joined!
    Join Date
    Jul 2009
    Posts
    12
    When I run alsaconf, I do not hear any test music.

    aplay -l results:

    **** List of PLAYBACK Hardware Devices ****
    card0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    cat /proc/asound/card0/codec#0 | grep Codec result:

    Codec: VIA ID 397

  5. #5
    Linux Engineer Segfault's Avatar
    Join Date
    Jun 2008
    Location
    Acadiana
    Posts
    877
    There is VIA support under Intel HDA. Maybe it's not enabled in your kernel configuration?

  6. #6
    Just Joined!
    Join Date
    Jul 2009
    Posts
    12
    Below, I have the output from lspci -vvnn and cat /proc/asound/card*/codec#*

    I noticed on lspci that :

    Controller [8086:293e] (rev 03)
    Subsystem: Santa Cruz Operation Unknown device [1111:1043]
    Is this a problem? I remember something similar from when I was trying to get my wireless connection to work (and updating the pci.ids file and making sure I was using Ath9k driver seemed to help there, though I am not entirely sure everything is working on that yet.)

    If the problem is kernel configuration, I don't really know where to begin fixing that.


    Here is /proc/asound/card*/codec#*:

    Codec: VIA ID 397
    Address: 0
    Vendor Id: 0x11060397
    Subsystem Id: 0x10431111
    Revision Id: 0x100000
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
    Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x22 0x22]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x1d 0x1d]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Connection: 1
    0x17
    Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x8b 0x8b]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Connection: 1
    0x1e
    Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
    Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x08 0x08] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
    Power: setting=D0, actual=D0
    Connection: 7
    0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
    Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
    Power: setting=D0, actual=D0
    Connection: 6
    0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
    Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x11
    Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x2
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x18
    Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x082334: IN OUT Detect
    Vref caps: HIZ 50 100
    Pin Default 0x01a19038: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x8
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x26
    Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x082334: IN OUT Detect
    Vref caps: HIZ 50 100
    Pin Default 0x418130f9: [N/A] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0xf, Sequence = 0x9
    Pin-ctls: 0x00: VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x18
    Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x081001c: OUT HP EAPD Detect
    EAPD 0x0:
    Pin Default 0x90070110: [Fixed] Line Out at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0xc0: OUT HP
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x16
    Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x08233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
    Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
    Pin-ctls: 0xc0: OUT HP VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 2
    0x16* 0x25
    Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x08233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
    Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x3, Sequence = 0xe
    Misc = NO_PRESENCE
    Pin-ctls: 0x00: VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 2
    0x16* 0x25
    Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
    Pincap 0x0820: IN
    Pin Default 0x593701f7: [N/A] CD at Int ATAPI
    Conn = Analog, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x7
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
    Pincap 0x0810: OUT
    Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
    Conn = RCA, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Connection: 1
    0x12
    Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
    Pincap 0x0810: OUT
    Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
    Conn = RCA, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Connection: 1
    0x15
    Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0xf, Sequence = 0x1
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x26
    Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    DefAssociation = 0xf, Sequence = 0x4
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x27
    Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x24
    Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x25


    I stupidly just posted /proc/asound/card0/codec#* last time, I think.

    Also, from lspci -vvnn:

    00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
    Subsystem: Santa Cruz Operation Unknown device [1111:1043]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2b- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at fdef4000 (64-bit, non-prefetchable) [size=16k]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1 D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0- DScale=0 PME-
    Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset+
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Suprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unkonwn, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [130] Root Complex Link <?>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel

  7. #7
    Linux Engineer Segfault's Avatar
    Join Date
    Jun 2008
    Location
    Acadiana
    Posts
    877
    Well, I don't like this Santa Cruz Operation Unknown device [1111:1043] thing.

    Maybe you should open an ALSA bug.

    http://git.alsa-project.org/?p=alsa-...s/alsa-info.sh
    This script collects ALSA info from your computer for reporting a problem.

  8. #8
    Linux Newbie sarlacii's Avatar
    Join Date
    May 2005
    Location
    South Africa
    Posts
    110
    Quote Originally Posted by jna31415 View Post
    Running Slackware 12.2 with 2.6.27 kernel. Brand new ASUS K50ij-RX05.

    lspci tells me that my audio device is:
    <snip>

    Any ideas on what to try next?
    I'm running PClinuxOS with kernel 2.6.26.8.tex3 #1 SMP. I have a similar sound card:

    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)

    And the driver is also the snd_hda_intel one. I have the following dmesg error in my case:

    hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
    hda_codec: Cannot set up configuration from BIOS. Using 3-stack mode...

    Which results in a working config and snd card. Go figure.

    So I would venture that the suggestion of checking the support for your particular version of card is best... the driver is correct for your card, but support looks buggy.

    Good luck mate.
    Respectfully... Sarlac II
    ~~
    The moving clock K' appears to K to run slow by the factor (1-v^2/c^2)^(1/2).
    This is the phenomenon of time dilation.
    The faster you run, the younger you look, to everyone but yourself.

  9. #9
    Just Joined!
    Join Date
    Jul 2009
    Posts
    12
    If the problem is support, what would I do about that? I am a little too new to this to know off of the top of my head. If it wouldn't take long to say, telling me might save me another day of searching the internet for a solution. Thank you for your time, in any case.

    From running the also-info script (and please note that I do not have internet working on my Linux-running laptop yet, so it could not fix any problems by downloading anything--I am typing this on a different computer):


    upload=true&script=true&cardinfo=
    !!################################
    !!ALSA Information Script v 0.4.57
    !!################################

    !!Script ran on: Wed Jul 29 20:59:01 UTC 2009


    !!Linux Distribution
    !!------------------

    Slackware 12.2.0


    !!DMI Information
    !!---------------

    Manufacturer: ASUSTeK Computer Inc.
    Product Name: K50IJ


    !!Kernel Information
    !!------------------

    Kernel release: 2.6.27.7-smp
    Operating System: GNU/Linux
    Architecture: i686
    Processor: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz
    SMP Enabled: Yes


    !!ALSA Version
    !!------------

    Driver version: 1.0.17
    Library version: 1.0.17a
    Utilities version: 1.0.17


    !!Loaded ALSA modules
    !!-------------------

    snd_hda_intel


    !!Sound Servers on this system
    !!----------------------------

    ESound Daemon:
    Installed - Yes (/usr/bin/esd)
    Running - No

    aRts:
    Installed - Yes (/usr/bin/artsd)
    Running - Yes


    !!Soundcards recognised by ALSA
    !!-----------------------------

    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xfdef4000 irq 22


    !!PCI Soundcards installed in the system
    !!--------------------------------------

    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)


    !!Advanced information - PCI Vendor/Device/Susbsystem ID's
    !!--------------------------------------------------------

    00:1b.0 0403: 8086:293e (rev 03)
    Subsystem: 1111:1043


    !!Modprobe options (Sound related)
    !!--------------------------------

    snd-hda-intel: model=asus


    !!Loaded sound module options
    !!--------------------------

    !!Module: snd_hda_intel
    bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1
    enable : Y,Y,Y,Y,Y,Y,Y,Y
    enable_msi : 0
    id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,< NULL>
    index : -1,-1,-1,-1,-1,-1,-1,-1
    model : asus,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NU LL>
    position_fix : 0,0,0,0,0,0,0,0
    probe_mask : -1,-1,-1,-1,-1,-1,-1,-1
    single_cmd : N


    !!HDA-Intel Codec information
    !!---------------------------
    --startcollapse--

    Codec: VIA ID 397
    Address: 0
    Vendor Id: 0x11060397
    Subsystem Id: 0x10431111
    Revision Id: 0x100000
    No Modem Function Group found
    Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
    Default Amp-In caps: N/A
    Default Amp-Out caps: N/A
    GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
    IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
    Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x22 0x22]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x14 0x14]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Connection: 1
    0x17
    Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
    Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x8b 0x8b]
    Converter: stream=0, channel=0
    SDI-Select: 0
    PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Connection: 1
    0x1e
    Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
    Converter: stream=0, channel=0
    Digital:
    Digital category: 0x0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
    Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
    Amp-In vals: [0x08 0x08] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
    Power: setting=D0, actual=D0
    Connection: 7
    0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
    Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
    Power: setting=D0, actual=D0
    Connection: 6
    0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
    Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x11
    Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x2
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x18
    Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x082334: IN OUT Detect
    Vref caps: HIZ 50 100
    Pin Default 0x01a19038: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0x8
    Pin-ctls: 0x20: IN VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x26
    Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x082334: IN OUT Detect
    Vref caps: HIZ 50 100
    Pin Default 0x418130f9: [N/A] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0xf, Sequence = 0x9
    Pin-ctls: 0x00: VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x18
    Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x081001c: OUT HP EAPD Detect
    EAPD 0x0:
    Pin Default 0x90070110: [Fixed] Line Out at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0xc0: OUT HP
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x16
    Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x00 0x00]
    Pincap 0x08233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
    Pin Default 0x0121401f: [Jack] HP Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0xf
    Pin-ctls: 0xc0: OUT HP VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 2
    0x16* 0x25
    Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Pincap 0x08233c: IN OUT HP Detect
    Vref caps: HIZ 50 100
    Pin Default 0x90a7013e: [Fixed] Mic at Int N/A
    Conn = Analog, Color = Unknown
    DefAssociation = 0x3, Sequence = 0xe
    Misc = NO_PRESENCE
    Pin-ctls: 0x00: VREF_HIZ
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 2
    0x16* 0x25
    Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
    Pincap 0x0820: IN
    Pin Default 0x593701f7: [N/A] CD at Int ATAPI
    Conn = Analog, Color = Unknown
    DefAssociation = 0xf, Sequence = 0x7
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
    Pincap 0x0810: OUT
    Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
    Conn = RCA, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Connection: 1
    0x12
    Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
    Pincap 0x0810: OUT
    Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
    Conn = RCA, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
    Pin-ctls: 0x00:
    Power: setting=D0, actual=D0
    Connection: 1
    0x15
    Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Orange
    DefAssociation = 0xf, Sequence = 0x1
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x26
    Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
    Pincap 0x0814: OUT Detect
    Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
    Conn = 1/8, Color = Grey
    DefAssociation = 0xf, Sequence = 0x4
    Pin-ctls: 0x00:
    Unsolicited: tag=00, enabled=0
    Power: setting=D0, actual=D0
    Connection: 1
    0x27
    Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
    Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
    Amp-Out vals: [0x2a 0x2a]
    Converter: stream=0, channel=0
    PCM:
    rates [0x5e0]: 44100 48000 88200 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
    Power: setting=D0, actual=D0
    Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x24
    Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
    Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
    Amp-Out vals: [0x80 0x80]
    Power: setting=D0, actual=D0
    Connection: 1
    0x25
    --endcollapse--


    !!ALSA Device nodes
    !!-----------------

    crw-rw---- 1 root audio 116, 0 Jul 29 10:51 /dev/snd/controlC0
    crw-rw---- 1 root audio 116, 4 Jul 29 10:51 /dev/snd/hwC0D0
    crw-rw---- 1 root audio 116, 24 Jul 29 10:51 /dev/snd/pcmC0D0c
    crw-rw---- 1 root audio 116, 16 Jul 29 15:55 /dev/snd/pcmC0D0p
    crw-rw---- 1 root audio 116, 1 Jul 29 15:51 /dev/snd/seq
    crw-rw---- 1 root audio 116, 33 Jul 29 10:51 /dev/snd/timer


    !!ALSA configuration files
    !!------------------------

    !!System wide config file (/etc/asound.conf)

    pcm.headset {
    type bluetooth
    }

    ctl.headset {
    type bluetooth
    }


    !!Aplay/Arecord output
    !!------------

    APLAY

    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    ARECORD

    **** List of CAPTURE Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    !!Amixer output
    !!-------------

    !!-------Mixer controls for card 0 [Intel]

    Card hw:0 'Intel'/'HDA Intel at 0xfdef4000 irq 22'
    Mixer name : 'VIA ID 397'
    Components : 'HDA:11060397'
    Controls : 4
    Simple ctrls : 3
    Simple mixer control 'Master',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 42
    Mono:
    Front Left: Playback 34 [81%] [-12.00dB]
    Front Right: Playback 34 [81%] [-12.00dB]
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 31
    Front Left: Capture 20 [65%] [13.50dB] [on]
    Front Right: Capture 20 [65%] [13.50dB] [on]


    !!Alsactl output
    !!-------------

    --startcollapse--
    state.Intel {
    control.1 {
    comment.access 'read write'
    comment.type BOOLEAN
    comment.count 2
    iface MIXER
    name 'Capture Switch'
    value.0 true
    value.1 true
    }
    control.2 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 31'
    comment.dbmin -1650
    comment.dbmax 3000
    iface MIXER
    name 'Capture Volume'
    value.0 20
    value.1 20
    }
    control.3 {
    comment.access 'read write'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 42'
    comment.dbmin -6300
    comment.dbmax 0
    iface MIXER
    name 'Master Playback Volume'
    value.0 34
    value.1 34
    }
    control.4 {
    comment.access 'read write user'
    comment.type INTEGER
    comment.count 2
    comment.range '0 - 255'
    comment.tlv '0000000100000008ffffec1400000014'
    comment.dbmin -5100
    comment.dbmax 0
    iface MIXER
    name 'PCM Playback Volume'
    value.0 255
    value.1 255
    }
    }
    --endcollapse--


    !!All Loaded Modules
    !!------------------

    Module
    snd_seq_dummy
    snd_seq_oss
    snd_seq_midi_event
    snd_seq
    snd_seq_device
    snd_pcm_oss
    snd_mixer_oss
    ipv6
    pcmcia
    pcmcia_core
    lp
    ppdev
    parport_pc
    parport
    fuse
    snd_hda_intel
    snd_pcm
    intel_agp
    snd_timer
    snd_page_alloc
    snd_hwdep
    agpgart
    asus_laptop
    led_class
    snd
    uvcvideo
    compat_ioctl32
    atl1e
    videodev
    soundcore
    evdev
    v4l1_compat
    psmouse
    ac
    thermal
    sg
    battery
    button
    processor
    serio_raw
    video
    thermal_sys
    hwmon
    output


    !!ALSA/HDA dmesg
    !!------------------

    agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    Clocksource tsc unstable (delta = -140980351 ns)

  10. #10
    Linux Engineer Segfault's Avatar
    Join Date
    Jun 2008
    Location
    Acadiana
    Posts
    877
    Well, what I meant is you should go to Main Page - AlsaProject . Lots of useful information there. In Advanced ALSA Users section you can click on 'I found a bug!', create a new account and report your problem. You can search the bugs, too, to see if something useful pops up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •