Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
i just finished to install gentoo from parallelknoppix64 but i was unable to: # mirrorselect -i -o >> /mnt/gentoo/etc/make.conf and # mirrorselect -i -r -o >> /mnt/gentoo/etc/make.conf an now when ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Dec 2007
    Posts
    39

    i finished to install gentoo but...


    i just finished to install gentoo from parallelknoppix64 but i was unable to:
    # mirrorselect -i -o >> /mnt/gentoo/etc/make.conf
    and
    # mirrorselect -i -r -o >> /mnt/gentoo/etc/make.conf
    an now when i am trying to emerge anything he is not working.i try it whit gentoo live cd i chroot but i can't
    mirrorselect
    i try it to emerge mirrorselect the same problem:
    sabayonx86-64 linux # emerge app-portage/mirrorselect
    Calculating dependencies... done!
    >>> Verifying ebuild Manifests...

    >>> Emerging (1 of 3) dev-util/dialog-1.1.20070704 to /
    >>> Downloading 'ftp://ftp.ecc.u-tokyo.ac.jp/GENTOO/distfiles/dialog-1.1-20070704.tgz'
    --22:40:02-- ftp://ftp.ecc.u-tokyo.ac.jp/GENTOO/d...1-20070704.tgz
    => `/usr/portage/distfiles/dialog-1.1-20070704.tgz'
    Resolving ftp.ecc.u-tokyo.ac.jp... failed: Temporary failure in name resolution.
    >>> Downloading 'http://gentoo.gg3.net/distfiles/dialog-1.1-20070704.tgz'
    --22:40:02-- http://gentoo.gg3.net/distfiles/dialog-1.1-20070704.tgz
    => `/usr/portage/distfiles/dialog-1.1-20070704.tgz'
    Resolving gentoo.gg3.net... failed: Temporary failure in name resolution.
    >>> Downloading 'ftp://gg3.net/pub/linux/gentoo/distfiles/dialog-1.1-20070704.tgz'
    --22:40:02-- ftp://gg3.net/pub/linux/gentoo/distf...1-20070704.tgz
    => `/usr/portage/distfiles/dialog-1.1-20070704.tgz'
    Resolving gg3.net... failed: Temporary failure in name resolution.
    >>> Downloading 'ftp://invisible-island.net/dialog/dialog-1.1-20070704.tgz'
    --22:40:02-- ftp://invisible-island.net/dialog/di...1-20070704.tgz
    => `/usr/portage/distfiles/dialog-1.1-20070704.tgz'
    Resolving invisible-island.net... failed: Temporary failure in name resolution.
    !!! Couldn't download 'dialog-1.1-20070704.tgz'. Aborting.
    * Fetch failed for 'dev-util/dialog-1.1.20070704'

    * Messages for package dev-util/dialog-1.1.20070704:

    * Fetch failed for 'dev-util/dialog-1.1.20070704'
    sabayonx86-64 linux #
    i am using pppoe end when i check it says up and running.
    what else can do.Thanks

  2. #2
    Linux Guru Jonathan183's Avatar
    Join Date
    Oct 2007
    Posts
    3,042
    It looks to me like you don't have a working internet connection ... can you access the internet using links? If you can run links but can't access any sites eg Gentoo Linux -- Gentoo Linux News then you probably need to boot from the live CD again ... you might need to chroot and go through the network setup again.

  3. #3
    Just Joined!
    Join Date
    Dec 2007
    Posts
    39
    solved,i installed rc-pppoe an now it-s working,thanks but now i have another problem,i just installed X11-xorg an i don't know how to :
    /etc/X11/xorg.conf
    spouse to look i try it to make the same settings like in live cd sabayon,no results. please help

  4. #4
    Linux Newbie tvilkov's Avatar
    Join Date
    Jan 2007
    Location
    Moscow
    Posts
    136
    try running -
    Code:
    Xorg -configure
    then
    Code:
    X -config /root/xorg.conf.new
    If all goes well you should see a cross (your mouse) in the middle of the screen.
    Gentoo 2.6.24 amd64
    AMD Anthlon 64 X2, 2 GB RAM, Asus M2N-MX, nVidia GeForce 9600GT 512Mb, 250Gb + 160Gb HDDs

  5. #5
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Or you could boot up any LiveCD like Knoppix and copy that xorg.conf file to your Gentoo partition. That's how I do it.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  6. #6
    Just Joined!
    Join Date
    Dec 2007
    Posts
    39
    i try it whit
    Xorg -configure
    and after
    X -config /root/xorg.conf.new
    and i see the mouse in the middle of the screen it's move but nothig else happend.
    what now?
    and i try it to boot up from knoppix and i got this
    knoppix@Knoppix:~$ su
    root@Knoppix:/home/knoppix# sudo mount /dev/sda1 /mnt/gentoo/boot
    mount: mount point /mnt/gentoo/boot does not exist
    root@Knoppix:/home/knoppix# sudo mount /dev/sda3 /mnt/gentoo
    mount: mount point /mnt/gentoo does not exist
    root@Knoppix:/home/knoppix#
    what to do ?please help

  7. #7
    Linux Guru Jonathan183's Avatar
    Join Date
    Oct 2007
    Posts
    3,042
    I think you missed out the mkdir /mnt/gentoo and mkdir /mnt/gentoo/boot steps before mounting the partitions.

  8. #8
    Linux Enthusiast gruven's Avatar
    Join Date
    Dec 2004
    Location
    Arkansas
    Posts
    541
    *edit*
    wrong thread

    Linux User #376741
    Code is Poetry

  9. #9
    Just Joined!
    Join Date
    Dec 2007
    Posts
    39
    thanks friends , but still i don't get it .I tray it to replace gentoo xorg wiht knoppix xorg but error again ,i search google i try it in many ways to replace what was configured by xorgconfig.no results. this is my video:Forsa NVIDIA 8500 GT and my monitor: daewoo 17' model HL711S [horizontal 31,5-80 khz vertical 56-75hz 1280x1024] please tell me how my xorg supose to look ?this is my xorg now:

    File generated by xorgconfig.

    #
    # Copyright 2004 The X.Org Foundation
    #
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    #
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    #
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    #
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    #

    # ************************************************** ********************
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # ************************************************** ********************

    # ************************************************** ********************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** ********************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection

    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"

    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"

    EndSection

    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    # RgbPath "/usr/share/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    #

    FontPath "/usr/share/fonts/misc/"
    # FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/lib/modules"

    EndSection

    # ************************************************** ********************
    # Server flags section.
    # ************************************************** ********************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.

    # Option "DontVTSwitch"

    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # ************************************************** ********************
    # Input devices
    # ************************************************** ********************

    # ************************************************** ********************
    # Core keyboard's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "kbd"

    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    $ "Meta"# Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"


    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" "gb"

    EndSection

    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.

    # Option "Resolution" "256"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.

    Option "ZAxisMapping" "4 5 6 7"

    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection


    # ************************************************** ********************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # ************************************************** ********************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************

    # Any number of monitor sections may be present

    Section "Monitor"

    Identifier "My Monitor"

    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync 31.5 - 64.3

    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

    EndSection


    # ************************************************** ********************
    # Graphics device section
    # ************************************************** ********************

    # Any number of graphics device sections may be present

    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.

    # BusID "PCI:0:10:0"

    # VideoRam 256

    # Clocks 25.2 28.3

    EndSection

    # Device configured by xorgconfig:

    Section "Device"
    Identifier "My Video Card"
    Driver "vga"
    # unsupported card
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection


    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "My Video Card"
    Monitor "My Monitor"
    DefaultDepth 24

    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection

    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Simple Layout"

    # Each Screen line specifies a Screen section name, and optionally

    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.

    Screen "Screen 1"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection

    # Section "DRI"
    # Mode 0666
    # EndSection
    please help

  10. #10
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    WOW, that's the Sabayon xorg.conf file? It's changed since I last used it.
    I did manage to edit your file, to the best of my ability and I think it should work for now, once we get X working we can work on installing the Nvidia driver.
    Copy and paste this into your /etc/X11/xorg.conf file, lets see if this works.
    If it does work it may be slow due to the vesa driver, we'll fix that later.
    Keep in mind, this may not work the first time, just be sure to write down any errors that occur.
    Code:
    #####File generated by hand.
    
    #
    # Copyright 2004 The X.Org Foundation
    # ************************************************** 
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # ************************************************** 
    
    # ************************************************** 
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ************************************************** 
    #
    Section "Module"
    
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    
    # This loads the font modules
      Load "type1"
    Load "freetype"
    # Load "xtt"
    
    # This loads the GLX module
      Load "glx"
    # This loads the DRI module
    # Load "dri"
    
    EndSection
    
    # ************************************************** ********************
    # Files section. This allows default font and rgb paths to be set
    # ************************************************** ********************
    
    Section "Files"
    
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    
    # RgbPath "/usr/share/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    #
    
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    
    EndSection
    
    Section "InputDevice"
    
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    Option "XkbVariant" "gb"
    
    EndSection
    
    # ************************************************** ********************
    # Core Pointer's InputDevice section
    # ************************************************** ********************
    
    Section "InputDevice"
    
    # Identifier and driver
    
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    # Option "ChordMiddle"
    
    EndSection
    
    
    # ************************************************** ********************
    # Monitor section
    # ************************************************** ********************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
    Identifier "My Monitor"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
    HorizSync 31.5 - 80.0
    VertRefresh 56 - 75
    
    EndSection
    
    
    # ************************************************** 
    # Graphics device section
    # ************************************************** 
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Nvidia"
    BoardName  "Nvidia"
    Driver "vesa"
    
    EndSection
    
    # ************************************************** ********************
    # Screen sections
    # ************************************************** ********************
    
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "My Video Card"
    Monitor "My Monitor"
    DefaultDepth 24
    
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    
    # ************************************************** ********************
    # ServerLayout sections.
    # ************************************************** ********************
    
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
    Identifier "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    
    Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •