Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
Hello, Recently I bought the live dvd Gentoo 12, and am wanting to install Gentoo, but for the moment can not get the live edition to connect to the net. ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Sep 2010
    Posts
    30

    connecting to the net


    Hello,

    Recently I bought the live dvd Gentoo 12, and am wanting to install Gentoo, but for the moment can not get the live edition to connect to the net.

    How is connecting to the net done if I boot to the disc on startup?

    I would greatly appreciate being pointed in the right direction.

  2. #2
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Howdy.
    How are you attempting to connect the the Internet? Wireless? Ethernet? Dial Up?
    Do you see the network icon in the system tray? Mine is in the lower right hand corner.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  3. #3
    Just Joined!
    Join Date
    Sep 2010
    Posts
    30
    I am currently using Mint 11. In my Network connections icon the sections VPN, DSL and Wireless sections are empty. Under Wired is Auto Eth0 last used an hour ago.
    I am using Mobile Broadband.

    Sorry! I should have known to include these details.

  4. $spacer_open
    $spacer_close
  5. #4
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Read through this link and post your results please.
    http://www.linuxforums.org/forum/wir...tup-linux.html
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  6. #5
    Just Joined!
    Join Date
    Sep 2010
    Posts
    30
    here are the replies you wanted from inside mint. I was trying to copy and paste from the gentoo but when I reboot I lost the answers

    lspci -nn

    Code:
    0:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
    00:01.0 PCI bridge [0604]: ASUSTeK Computer Inc. RS880 PCI to PCI bridge (int gfx) [1043:9602]
    00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606]
    00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390]
    00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398]
    00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398]
    00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
    00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
    00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
    00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
    00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
    00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
    00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
    00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
    00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
    01:05.0 VGA compatible controller [0300]: ATI Technologies Inc 760G [Radeon 3000] [1002:9616]
    02:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
    lsusb

    Code:
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 002: ID 045e:0750 Microsoft Corp. Wired Keyboard 600
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 12d1:14ac Huawei Technologies Co., Ltd. 
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    lsmod

    Code:
    Module                  Size  Used by
    ppp_deflate            12990  0 
    bsd_comp               12913  0 
    ppp_async              17540  1 
    crc_ccitt              12667  1 ppp_async
    binfmt_misc            17565  1 
    ipt_REJECT             12576  1 
    ipt_LOG                17016  4 
    xt_limit               12711  6 
    xt_tcpudp              12603  8 
    ipt_addrtype           12599  4 
    xt_state               12578  9 
    ip6table_filter        12815  1 
    ip6_tables             27845  1 ip6table_filter
    dm_crypt               22993  0 
    nf_nat_irc             12643  0 
    nf_conntrack_irc       13383  1 nf_nat_irc
    nf_nat_ftp             12649  0 
    nf_nat                 25736  2 nf_nat_irc,nf_nat_ftp
    nf_conntrack_ipv4      19640  11 nf_nat
    nf_defrag_ipv4         12729  1 nf_conntrack_ipv4
    nf_conntrack_ftp       13359  1 nf_nat_ftp
    nf_conntrack           81956  7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
    snd_hda_codec_via      62470  1 
    iptable_filter         12810  1 
    snd_hda_intel          33211  2 
    snd_hda_codec         103804  2 snd_hda_codec_via,snd_hda_intel
    snd_hwdep              13604  1 snd_hda_codec
    snd_pcm                96625  2 snd_hda_intel,snd_hda_codec
    snd_seq_midi           13324  0 
    snd_rawmidi            30486  1 snd_seq_midi
    snd_seq_midi_event     14899  1 snd_seq_midi
    option                 25285  2 
    usb_wwan               20407  1 option
    snd_seq                61621  2 snd_seq_midi,snd_seq_midi_event
    ip_tables              27456  1 iptable_filter
    usbserial              42908  7 option,usb_wwan
    ppdev                  17113  0 
    snd_timer              29602  2 snd_pcm,snd_seq
    joydev                 17606  0 
    snd_seq_device         14462  3 snd_seq_midi,snd_rawmidi,snd_seq
    x_tables               29581  10 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables
    snd                    67382  13 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
    psmouse                73535  0 
    sp5100_tco             13744  0 
    soundcore              12680  1 snd
    parport_pc             36959  1 
    serio_raw              13166  0 
    asus_atk0110           17976  0 
    snd_page_alloc         18529  2 snd_hda_intel,snd_pcm
    i2c_piix4              13303  0 
    edac_core              53845  0 
    k10temp                13119  0 
    edac_mce_amd           23464  0 
    shpchp                 37297  0 
    lp                     17825  0 
    parport                46458  3 ppdev,parport_pc,lp
    dm_raid45              77827  0 
    xor                    12890  1 dm_raid45
    btrfs                 550402  0 
    zlib_deflate           27074  2 ppp_deflate,btrfs
    libcrc32c              12644  1 btrfs
    usbhid                 46956  0 
    hid                    91020  1 usbhid
    radeon                982197  3 
    ttm                    76664  1 radeon
    drm_kms_helper         42136  1 radeon
    drm                   227495  5 radeon,ttm,drm_kms_helper
    usb_storage            53538  0 
    uas                    17996  0 
    atl1c                  41171  0 
    i2c_algo_bit           13400  1 radeon
    ahci                   25951  0 
    libahci                26642  1 ahci
    pata_atiixp            13165  2
    the dmesg | grep firmware does not seem to respond and dmesg gives more responses than can be cut and pasted
    Last edited by MikeTbob; 02-18-2012 at 10:21 PM. Reason: Added Code Tags

  7. #6
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Use dmesg this way to send the output to a text file and then you can post that.
    Code:
    dmesg > dmesg.txt
    It will be helpful to have. I found some instructions for Ubuntu but Gentoo will be a different beast all by itself.

    [all variants] Huawei E1820 + Ubuntu 10.04 64-bit - Ubuntu Forums
    Mobil Broadband HOWTO.
    How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10] - Ubuntu Forums
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  8. #7
    Just Joined!
    Join Date
    Sep 2010
    Posts
    30
    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
    [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=92286a57-4fd0-405a-95d1-d0d916206d7b ro quiet splash vt.handoff=7
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    [    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
    [    0.000000]  BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] DMI present.
    [    0.000000] DMI: System manufacturer System Product Name/M4A78LT-M-LE, BIOS 0403    11/03/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] No AGP bridge found
    [    0.000000] last_pfn = 0x6ff90 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-EFFFF uncachable
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000000 mask FFFFC0000000 write-back
    [    0.000000]   1 base 000040000000 mask FFFFE0000000 write-back
    [    0.000000]   2 base 000060000000 mask FFFFF0000000 write-back
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [    0.000000] initial memory mapped : 0 - 20000000
    [    0.000000] Using GB pages for direct mapping
    [    0.000000] init_memory_mapping: 0000000000000000-000000006ff90000
    [    0.000000]  0000000000 - 0040000000 page 1G
    [    0.000000]  0040000000 - 006fe00000 page 2M
    [    0.000000]  006fe00000 - 006ff90000 page 4k
    [    0.000000] kernel direct mapping tables up to 6ff90000 @ 1fffd000-20000000
    [    0.000000] RAMDISK: 35ad8000 - 36d64000
    [    0.000000] ACPI: RSDP 00000000000fb470 00024 (v02 ACPIAM)
    [    0.000000] ACPI: XSDT 000000006ff90100 00054 (v01 110309 XSDT2013 20091103 MSFT 00000097)
    [    0.000000] ACPI: FACP 000000006ff90290 000F4 (v03 110309 FACP2013 20091103 MSFT 00000097)
    [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557)
    [    0.000000] ACPI: DSDT 000000006ff90450 0CD3E (v01  A1467 A1467001 00000001 INTL 20060113)
    [    0.000000] ACPI: FACS 000000006ffa8000 00040
    [    0.000000] ACPI: APIC 000000006ff90390 0007C (v01 110309 APIC2013 20091103 MSFT 00000097)
    [    0.000000] ACPI: MCFG 000000006ff90410 0003C (v01 110309 OEMMCFG  20091103 MSFT 00000097)
    [    0.000000] ACPI: OEMB 000000006ffa8040 00072 (v01 110309 OEMB2013 20091103 MSFT 00000097)
    [    0.000000] ACPI: HPET 000000006ff9f450 00038 (v01 110309 OEMHPET  20091103 MSFT 00000097)
    [    0.000000] ACPI: SSDT 000000006ff9f490 00458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] Scanning NUMA topology in Northbridge 24
    [    0.000000] No NUMA configuration found
    [    0.000000] Faking a node at 0000000000000000-000000006ff90000
    [    0.000000] Initmem setup node 0 0000000000000000-000000006ff90000
    [    0.000000]   NODE_DATA [000000006ff8b000 - 000000006ff8ffff]
    [    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006da00000-ffff88006f3fffff] on node 0
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   DMA32    0x00001000 -> 0x00100000
    [    0.000000]   Normal   empty
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009e
    [    0.000000]     0: 0x00000100 -> 0x0006ff90
    [    0.000000] On node 0 totalpages: 458526
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 6 pages reserved
    [    0.000000]   DMA zone: 3920 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 6215 pages used for memmap
    [    0.000000]   DMA32 zone: 448329 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
    [    0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ff00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88006fc00000 s84416 r8192 d22080 u262144
    [    0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
    [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 452249
    [    0.000000] Policy zone: DMA32
    [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=92286a57-4fd0-405a-95d1-d0d916206d7b ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Checking aperture...
    [    0.000000] No AGP bridge found
    [    0.000000] Node 0: aperture @ 21e000000 size 32 MB
    [    0.000000] Aperture beyond 4GB. Ignoring.
    [    0.000000] Memory: 1774348k/1834560k available (5940k kernel code, 456k absent, 59756k reserved, 5017k data, 956k init)
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] 	RCU-based detection of stalled CPUs is disabled.
    [    0.000000] NR_IRQS:16640 nr_irqs:728 16
    [    0.000000] Extended CMOS year: 2000
    [    0.000000] spurious 8259A interrupt: IRQ7.
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] allocated 18350080 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 3013.787 MHz processor.
    [    0.010003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.57 BogoMIPS (lpj=30137870)
    [    0.010007] pid_max: default: 32768 minimum: 301
    [    0.010027] Security Framework initialized
    [    0.010038] AppArmor: AppArmor initialized
    [    0.010040] Yama: becoming mindful.
    [    0.010212] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.010947] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.011281] Mount-cache hash table entries: 256
    [    0.011382] Initializing cgroup subsys ns
    [    0.011385] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [    0.011388] Initializing cgroup subsys cpuacct
    [    0.011391] Initializing cgroup subsys memory
    [    0.011398] Initializing cgroup subsys devices
    [    0.011400] Initializing cgroup subsys freezer
    [    0.011401] Initializing cgroup subsys net_cls
    [    0.011403] Initializing cgroup subsys blkio
    [    0.011428] tseg: 0000000000
    [    0.011440] CPU: Physical Processor ID: 0
    [    0.011441] CPU: Processor Core ID: 0
    [    0.011443] mce: CPU supports 6 MCE banks
    [    0.012664] ACPI: Core revision 20110112
    [    0.020013] ftrace: allocating 24314 entries in 96 pages
    [    0.025356] Setting APIC routing to flat
    [    0.025649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.128993] CPU0: AMD Athlon(tm) II X2 250 Processor stepping 02
    [    0.130000] Performance Events: AMD PMU driver.
    [    0.130000] ... version:                0
    [    0.130000] ... bit width:              48
    [    0.130000] ... generic registers:      4
    [    0.130000] ... value mask:             0000ffffffffffff
    [    0.130000] ... max period:             00007fffffffffff
    [    0.130000] ... fixed-purpose events:   0
    [    0.130000] ... event mask:             000000000000000f
    [    0.130000] Booting Node   0, Processors  #1
    [    0.290011] Brought up 2 CPUs
    [    0.290012] Total of 2 processors activated (12054.45 BogoMIPS).
    [    0.290186] devtmpfs: initialized
    [    0.290641] print_constraints: dummy: 
    [    0.290662] Time: 22:16:15  Date: 02/18/12
    [    0.290686] NET: Registered protocol family 16
    [    0.290759] node 0 link 0: io port [1000, ffffff]
    [    0.290761] TOM: 0000000080000000 aka 2048M
    [    0.290763] Fam 10h mmconf [e0000000, efffffff]
    [    0.290764] node 0 link 0: mmio [a0000, bffff]
    [    0.290766] node 0 link 0: mmio [80000000, cfffffff]
    [    0.290768] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
    [    0.290771] node 0 link 0: mmio [f0000000, fe8fffff]
    [    0.290773] node 0 link 0: mmio [fe900000, feafffff]
    [    0.290775] node 0 link 0: mmio [feb00000, ffefffff]
    [    0.290776] bus: [00, 07] on node 0 link 0
    [    0.290779] bus: 00 index 0 [io  0x0000-0xffff]
    [    0.290780] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [    0.290694] Trying to unpack rootfs image as initramfs...
    [    0.290785] bus: 00 index 2 [mem 0x80000000-0xdfffffff]
    [    0.290787] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
    [    0.290796] Extended Config Space enabled on 1 nodes
    [    0.290804] ACPI: bus type pci registered
    [    0.290852] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.290854] PCI: not using MMCONFIG
    [    0.290855] PCI: Using configuration type 1 for base access
    [    0.290856] PCI: Using configuration type 1 for extended access
    [    0.291355] bio: create slab <bio-0> at 0
    [    0.292279] ACPI: EC: Look up EC in DSDT
    [    0.293830] ACPI: Executed 3 blocks of module-level executable AML code
    [    0.450543] ACPI: Interpreter enabled
    [    0.450547] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.450565] ACPI: Using IOAPIC for interrupt routing
    [    0.450585] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [    0.451702] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [    0.561873] Freeing initrd memory: 18992k freed
    [    0.600746] ACPI: No dock devices found.
    [    0.600748] HEST: Table not found.
    [    0.600751] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.600819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.600941] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
    [    0.600943] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
    [    0.600945] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.600947] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
    [    0.600948] pci_root PNP0A03:00: host bridge window [mem 0x70000000-0xdfffffff]
    [    0.600950] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [    0.600961] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
    [    0.600996] pci 0000:00:01.0: [1043:9602] type 1 class 0x000604
    [    0.601025] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
    [    0.601047] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [    0.601049] pci 0000:00:06.0: PME# disabled
    [    0.601079] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
    [    0.601097] pci 0000:00:11.0: reg 10: [io  0xc000-0xc007]
    [    0.601106] pci 0000:00:11.0: reg 14: [io  0xb000-0xb003]
    [    0.601115] pci 0000:00:11.0: reg 18: [io  0xa000-0xa007]
    [    0.601124] pci 0000:00:11.0: reg 1c: [io  0x9000-0x9003]
    [    0.601132] pci 0000:00:11.0: reg 20: [io  0x8000-0x800f]
    [    0.601141] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
    [    0.601160] pci 0000:00:11.0: set SATA to AHCI mode
    [    0.601192] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [    0.601204] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
    [    0.601263] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
    [    0.601276] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
    [    0.601340] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [    0.601358] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
    [    0.601424] pci 0000:00:12.2: supports D1 D2
    [    0.601425] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [    0.601428] pci 0000:00:12.2: PME# disabled
    [    0.601447] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [    0.601460] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
    [    0.601519] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
    [    0.601531] pci 0000:00:13.1: reg 10: [mem 0xfe8fb000-0xfe8fbfff]
    [    0.601595] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [    0.601613] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
    [    0.601679] pci 0000:00:13.2: supports D1 D2
    [    0.601680] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [    0.601684] pci 0000:00:13.2: PME# disabled
    [    0.601706] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [    0.601793] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
    [    0.601808] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
    [    0.601817] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
    [    0.601825] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
    [    0.601834] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
    [    0.601843] pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
    [    0.601889] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [    0.601909] pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
    [    0.601963] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [    0.601966] pci 0000:00:14.2: PME# disabled
    [    0.601980] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [    0.602049] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [    0.602087] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [    0.602099] pci 0000:00:14.5: reg 10: [mem 0xfe8fa000-0xfe8fafff]
    [    0.602161] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [    0.602172] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [    0.602182] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [    0.602193] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [    0.602205] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [    0.602242] pci 0000:01:05.0: [1002:9616] type 0 class 0x000300
    [    0.602249] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [    0.602253] pci 0000:01:05.0: reg 14: [io  0xd000-0xd0ff]
    [    0.602257] pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
    [    0.602265] pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff]
    [    0.602275] pci 0000:01:05.0: supports D1 D2
    [    0.602310] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.602313] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.602315] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
    [    0.602318] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.602351] pci 0000:02:00.0: [1969:1063] type 0 class 0x000200
    [    0.602370] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [    0.602380] pci 0000:02:00.0: reg 18: [io  0xec00-0xec7f]
    [    0.602443] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [    0.602447] pci 0000:02:00.0: PME# disabled
    [    0.620026] pci 0000:00:06.0: PCI bridge to [bus 02-02]
    [    0.620032] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
    [    0.620034] pci 0000:00:06.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.620038] pci 0000:00:06.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.620099] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [    0.620103] pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
    [    0.620107] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.620111] pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.620113] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.620115] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.620116] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.620118] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [    0.620120] pci 0000:00:14.4:   bridge window [mem 0x70000000-0xdfffffff] (subtractive decode)
    [    0.620122] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [    0.620135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.620287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [    0.620313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    [    0.620351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    [    0.620394]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.623292] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
    [    0.623321] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
    [    0.623348] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
    [    0.623374] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
    [    0.623399] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [    0.623425] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [    0.623452] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
    [    0.623477] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    [    0.623551] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.623553] vgaarb: loaded
    [    0.623666] SCSI subsystem initialized
    [    0.623685] libata version 3.00 loaded.
    [    0.623685] usbcore: registered new interface driver usbfs
    [    0.623685] usbcore: registered new interface driver hub
    [    0.623685] usbcore: registered new device driver usb
    [    0.623685] wmi: Mapper loaded
    [    0.623685] PCI: Using ACPI for IRQ routing
    [    0.623685] PCI: pci_cache_line_size set to 64 bytes
    [    0.623685] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
    [    0.623685] reserve RAM buffer: 000000006ff90000 - 000000006fffffff 
    [    0.623685] NetLabel: Initializing
    [    0.623685] NetLabel:  domain hash size = 128
    [    0.623685] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.623685] NetLabel:  unlabeled traffic allowed by default
    [    0.623685] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [    0.623685] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [    0.623685] Switching to clocksource hpet
    [    0.623698] Switched to NOHz mode on CPU #0
    [    0.623737] Switched to NOHz mode on CPU #1
    [    0.624537] AppArmor: AppArmor Filesystem Enabled
    [    0.624564] pnp: PnP ACPI init
    [    0.624578] ACPI: bus type pnp registered
    [    0.624676] pnp 00:00: [bus 00-ff]
    [    0.624678] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.624680] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.624682] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.624684] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.624685] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [    0.624687] pnp 00:00: [mem 0x70000000-0xdfffffff window]
    [    0.624689] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [    0.624737] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [    0.624803] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
    [    0.624804] pnp 00:01: [mem 0x70000000-0x7fffffff]
    [    0.624846] system 00:01: [mem 0x70000000-0x7fffffff] has been reserved
    [    0.624848] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.624876] pnp 00:02: [dma 4]
    [    0.624878] pnp 00:02: [io  0x0000-0x000f]
    [    0.624879] pnp 00:02: [io  0x0081-0x0083]
    [    0.624880] pnp 00:02: [io  0x0087]
    [    0.624882] pnp 00:02: [io  0x0089-0x008b]
    [    0.624883] pnp 00:02: [io  0x008f]
    [    0.624884] pnp 00:02: [io  0x00c0-0x00df]
    [    0.624902] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.624908] pnp 00:03: [io  0x0070-0x0071]
    [    0.624917] pnp 00:03: [irq 8]
    [    0.624936] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.624942] pnp 00:04: [io  0x0061]
    [    0.624959] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.624964] pnp 00:05: [io  0x00f0-0x00ff]
    [    0.624968] pnp 00:05: [irq 13]
    [    0.624987] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.625487] pnp 00:06: [io  0x0378-0x037f]
    [    0.625492] pnp 00:06: [irq 7]
    [    0.625494] pnp 00:06: [dma 0 disabled]
    [    0.625673] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
    [    0.625699] pnp 00:07: [mem 0xfed00000-0xfed003ff]
    [    0.625718] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.625747] pnp 00:08: [io  0x0060]
    [    0.625749] pnp 00:08: [io  0x0064]
    [    0.625752] pnp 00:08: [irq 12]
    [    0.625773] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
    [    0.626130] pnp 00:09: [io  0x03f8-0x03ff]
    [    0.626133] pnp 00:09: [irq 4]
    [    0.626135] pnp 00:09: [dma 0 disabled]
    [    0.626189] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.626238] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [    0.626240] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [    0.626271] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.626273] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.626275] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.626363] pnp 00:0b: [io  0x0010-0x001f]
    [    0.626365] pnp 00:0b: [io  0x0022-0x003f]
    [    0.626366] pnp 00:0b: [io  0x0062-0x0063]
    [    0.626370] pnp 00:0b: [io  0x0065-0x006f]
    [    0.626371] pnp 00:0b: [io  0x0072-0x007f]
    [    0.626373] pnp 00:0b: [io  0x0080]
    [    0.626374] pnp 00:0b: [io  0x0084-0x0086]
    [    0.626375] pnp 00:0b: [io  0x0088]
    [    0.626377] pnp 00:0b: [io  0x008c-0x008e]
    [    0.626378] pnp 00:0b: [io  0x0090-0x009f]
    [    0.626379] pnp 00:0b: [io  0x00a2-0x00bf]
    [    0.626380] pnp 00:0b: [io  0x00b1]
    [    0.626382] pnp 00:0b: [io  0x00e0-0x00ef]
    [    0.626383] pnp 00:0b: [io  0x04d0-0x04d1]
    [    0.626384] pnp 00:0b: [io  0x040b]
    [    0.626386] pnp 00:0b: [io  0x04d6]
    [    0.626387] pnp 00:0b: [io  0x0c00-0x0c01]
    [    0.626388] pnp 00:0b: [io  0x0c14]
    [    0.626389] pnp 00:0b: [io  0x0c50-0x0c51]
    [    0.626391] pnp 00:0b: [io  0x0c52]
    [    0.626392] pnp 00:0b: [io  0x0c6c]
    [    0.626393] pnp 00:0b: [io  0x0c6f]
    [    0.626394] pnp 00:0b: [io  0x0cd0-0x0cd1]
    [    0.626396] pnp 00:0b: [io  0x0cd2-0x0cd3]
    [    0.626397] pnp 00:0b: [io  0x0cd4-0x0cd5]
    [    0.626398] pnp 00:0b: [io  0x0cd6-0x0cd7]
    [    0.626400] pnp 00:0b: [io  0x0cd8-0x0cdf]
    [    0.626401] pnp 00:0b: [io  0x0b00-0x0b3f]
    [    0.626402] pnp 00:0b: [io  0x0800-0x089f]
    [    0.626404] pnp 00:0b: [io  0x0000-0xffffffffffffffff disabled]
    [    0.626405] pnp 00:0b: [io  0x0b00-0x0b0f]
    [    0.626407] pnp 00:0b: [io  0x0b20-0x0b3f]
    [    0.626408] pnp 00:0b: [io  0x0900-0x090f]
    [    0.626409] pnp 00:0b: [io  0x0910-0x091f]
    [    0.626411] pnp 00:0b: [io  0xfe00-0xfefe]
    [    0.626412] pnp 00:0b: [io  0x0060-0x005f disabled]
    [    0.626414] pnp 00:0b: [io  0x0064-0x0063 disabled]
    [    0.626415] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
    [    0.626417] pnp 00:0b: [mem 0xfec10000-0xfec1001f]
    [    0.626418] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
    [    0.626478] system 00:0b: [io  0x04d0-0x04d1] has been reserved
    [    0.626480] system 00:0b: [io  0x040b] has been reserved
    [    0.626481] system 00:0b: [io  0x04d6] has been reserved
    [    0.626483] system 00:0b: [io  0x0c00-0x0c01] has been reserved
    [    0.626485] system 00:0b: [io  0x0c14] has been reserved
    [    0.626487] system 00:0b: [io  0x0c50-0x0c51] has been reserved
    [    0.626488] system 00:0b: [io  0x0c52] has been reserved
    [    0.626490] system 00:0b: [io  0x0c6c] has been reserved
    [    0.626492] system 00:0b: [io  0x0c6f] has been reserved
    [    0.626494] system 00:0b: [io  0x0cd0-0x0cd1] has been reserved
    [    0.626496] system 00:0b: [io  0x0cd2-0x0cd3] has been reserved
    [    0.626497] system 00:0b: [io  0x0cd4-0x0cd5] has been reserved
    [    0.626499] system 00:0b: [io  0x0cd6-0x0cd7] has been reserved
    [    0.626501] system 00:0b: [io  0x0cd8-0x0cdf] has been reserved
    [    0.626503] system 00:0b: [io  0x0b00-0x0b3f] has been reserved
    [    0.626505] system 00:0b: [io  0x0800-0x089f] has been reserved
    [    0.626507] system 00:0b: [io  0x0b00-0x0b0f] has been reserved
    [    0.626509] system 00:0b: [io  0x0b20-0x0b3f] has been reserved
    [    0.626511] system 00:0b: [io  0x0900-0x090f] has been reserved
    [    0.626512] system 00:0b: [io  0x0910-0x091f] has been reserved
    [    0.626514] system 00:0b: [io  0xfe00-0xfefe] has been reserved
    [    0.626517] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved
    [    0.626519] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved
    [    0.626521] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
    [    0.626523] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.626622] pnp 00:0c: [io  0x0000-0xffffffffffffffff disabled]
    [    0.626624] pnp 00:0c: [io  0x0230-0x023f]
    [    0.626625] pnp 00:0c: [io  0x0290-0x029f]
    [    0.626626] pnp 00:0c: [io  0x0300-0x030f]
    [    0.626629] pnp 00:0c: [io  0x0a30-0x0a3f]
    [    0.626663] system 00:0c: [io  0x0230-0x023f] has been reserved
    [    0.626665] system 00:0c: [io  0x0290-0x029f] has been reserved
    [    0.626667] system 00:0c: [io  0x0300-0x030f] has been reserved
    [    0.626668] system 00:0c: [io  0x0a30-0x0a3f] has been reserved
    [    0.626671] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.626694] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [    0.626725] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [    0.626727] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.640273] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [    0.640276] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [    0.640277] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [    0.640279] pnp 00:0e: [mem 0x00100000-0x6fffffff]
    [    0.640280] pnp 00:0e: [mem 0xfec00000-0xffffffff]
    [    0.640356] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.640358] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
    [    0.640360] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.640362] system 00:0e: [mem 0x00100000-0x6fffffff] could not be reserved
    [    0.640364] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved
    [    0.640367] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.640442] pnp: PnP ACPI: found 15 devices
    [    0.640444] ACPI: ACPI bus type pnp unregistered
    [    0.646022] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [    0.646024] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
    [    0.646027] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
    [    0.646030] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.646033] pci 0000:00:06.0: PCI bridge to [bus 02-02]
    [    0.646035] pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
    [    0.646037] pci 0000:00:06.0:   bridge window [mem 0xfeb00000-0xfebfffff]
    [    0.646039] pci 0000:00:06.0:   bridge window [mem pref disabled]
    [    0.646042] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [    0.646044] pci 0000:00:14.4:   bridge window [io  disabled]
    [    0.646048] pci 0000:00:14.4:   bridge window [mem disabled]
    [    0.646051] pci 0000:00:14.4:   bridge window [mem pref disabled]
    [    0.646070] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    0.646072] pci 0000:00:06.0: setting latency timer to 64
    [    0.646079] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.646080] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.646082] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.646084] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.646086] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff]
    [    0.646088] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [    0.646089] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
    [    0.646091] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
    [    0.646093] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [    0.646095] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
    [    0.646097] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
    [    0.646098] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
    [    0.646100] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
    [    0.646102] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.646103] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [    0.646105] pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff]
    [    0.646107] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
    [    0.646130] NET: Registered protocol family 2
    [    0.646205] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.646687] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [    0.648076] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [    0.648413] TCP: Hash tables configured (established 262144 bind 65536)
    [    0.648415] TCP reno registered
    [    0.648424] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.648439] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.648535] NET: Registered protocol family 1
    [    0.648545] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [    0.840059] pci 0000:01:05.0: Boot video device
    [    0.840065] PCI: CLS 64 bytes, default 64
    [    0.841273] audit: initializing netlink socket (disabled)
    [    0.841282] type=2000 audit(1329603374.840:1): initialized
    [    0.850724] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    0.852028] VFS: Disk quotas dquot_6.5.2
    [    0.852087] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.852594] fuse init (API version 7.16)
    [    0.852689] msgmni has been set to 3502
    [    0.852983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.853037] io scheduler noop registered
    [    0.853040] io scheduler deadline registered
    [    0.853081] io scheduler cfq registered (default)
    [    0.853262] pcieport 0000:00:06.0: setting latency timer to 64
    [    0.853288] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
    [    0.853397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.853421] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.853528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.853532] ACPI: Power Button [PWRB]
    [    0.853567] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.853569] ACPI: Power Button [PWRF]
    [    0.853677] ACPI: acpi_idle registered with cpuidle
    [    0.980395] ERST: Table is not found!
    [    0.980466] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    1.001072] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.180779] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.181040] Linux agpgart interface v0.103
    [    1.181747] brd: module loaded
    [    1.182064] loop: module loaded
    [    1.182125] i2c-core: driver [adp5520] using legacy suspend method
    [    1.182126] i2c-core: driver [adp5520] using legacy resume method
    [    1.182287] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.182310] pata_acpi 0000:00:14.1: setting latency timer to 64
    [    1.182637] Fixed MDIO Bus: probed
    [    1.182658] PPP generic driver version 2.4.2
    [    1.182703] tun: Universal TUN/TAP device driver, 1.6
    [    1.182704] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.182764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.182847] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    1.182866] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [    1.182940] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [    1.220058] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.220081] ehci_hcd 0000:00:12.2: debug port 1
    [    1.220106] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
    [    1.240041] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [    1.240160] hub 1-0:1.0: USB hub found
    [    1.240164] hub 1-0:1.0: 6 ports detected
    [    1.240307] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [    1.240324] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [    1.240354] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [    1.240383] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [    1.240401] ehci_hcd 0000:00:13.2: debug port 1
    [    1.240420] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
    [    1.260040] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [    1.260152] hub 2-0:1.0: USB hub found
    [    1.260156] hub 2-0:1.0: 6 ports detected
    [    1.260258] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.260332] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.260350] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [    1.260389] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
    [    1.260437] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
    [    1.324155] hub 3-0:1.0: USB hub found
    [    1.324162] hub 3-0:1.0: 3 ports detected
    [    1.324301] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    1.324317] ohci_hcd 0000:00:12.1: OHCI Host Controller
    [    1.324350] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    [    1.324386] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
    [    1.384158] hub 4-0:1.0: USB hub found
    [    1.384164] hub 4-0:1.0: 3 ports detected
    [    1.384304] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.384322] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [    1.384351] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [    1.384394] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
    [    1.444168] hub 5-0:1.0: USB hub found
    [    1.444175] hub 5-0:1.0: 3 ports detected
    [    1.444308] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.444325] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [    1.444353] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    [    1.444390] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
    [    1.504170] hub 6-0:1.0: USB hub found
    [    1.504176] hub 6-0:1.0: 3 ports detected
    [    1.504316] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    1.504335] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [    1.504365] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    [    1.510089] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000
    [    1.574164] hub 7-0:1.0: USB hub found
    [    1.574170] hub 7-0:1.0: 2 ports detected
    [    1.574270] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.574362] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
    [    1.574364] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
    [    1.574714] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.574719] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.574815] mousedev: PS/2 mouse device common for all mice
    [    1.574893] rtc_cmos 00:03: RTC can wake from S4
    [    1.590112] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    1.590138] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    1.590224] device-mapper: uevent: version 1.0.3
    [    1.590276] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
    [    1.590378] device-mapper: multipath: version 1.2.0 loaded
    [    1.590380] device-mapper: multipath round-robin: version 1.0.0 loaded
    [    1.590503] cpuidle: using governor ladder
    [    1.590505] cpuidle: using governor menu
    [    1.590661] TCP cubic registered
    [    1.590740] NET: Registered protocol family 10
    [    1.591081] NET: Registered protocol family 17
    [    1.591093] Registering the dns_resolver key type
    [    1.591118] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (2 cpu cores) (version 2.20.00)
    [    1.591148] powernow-k8:    0 : pstate 0 (3000 MHz)
    [    1.591149] powernow-k8:    1 : pstate 1 (2300 MHz)
    [    1.591151] powernow-k8:    2 : pstate 2 (1800 MHz)
    [    1.591152] powernow-k8:    3 : pstate 3 (800 MHz)
    [    1.591573] PM: Hibernation image not present or could not be loaded.
    [    1.591586] registered taskstats version 1
    [    1.591754]   Magic number: 0:382:300
    [    1.591839] rtc_cmos 00:03: setting system clock to 2012-02-18 22:16:16 UTC (1329603376)
    [    1.591842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.591843] EDD information not available.
    [    1.593093] Freeing unused kernel memory: 956k freed
    [    1.593334] Write protecting the kernel read-only data: 10240k
    [    1.593944] Freeing unused kernel memory: 184k freed
    [    1.597659] Freeing unused kernel memory: 1444k freed
    [    1.618643] <30>udev[98]: starting version 167
    [    1.620037] usb 1-5: new high speed USB device using ehci_hcd and address 3
    [    1.686605] scsi0 : pata_atiixp
    [    1.686775] scsi1 : pata_atiixp
    [    1.687246] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [    1.687248] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [    1.689795] ahci 0000:00:11.0: version 3.0
    [    1.689818] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    1.689926] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [    1.689929] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
    [    1.691493] scsi2 : ahci
    [    1.692339] scsi3 : ahci
    [    1.692404] atl1c 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    1.692413] atl1c 0000:02:00.0: setting latency timer to 64
    [    1.692483] scsi4 : ahci
    [    1.692634] scsi5 : ahci
    [    1.692718] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
    [    1.692721] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
    [    1.692724] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
    [    1.692727] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
    [    1.791014] usbcore: registered new interface driver uas
    [    1.823361] Initializing USB Mass Storage driver...
    [    1.823597] scsi6 : usb-storage 1-5:1.5
    [    1.823742] scsi7 : usb-storage 1-5:1.6
    [    1.823801] usbcore: registered new interface driver usb-storage
    [    1.823803] USB Mass Storage support registered.
    [    1.840048] Refined TSC clocksource calibration: 3013.427 MHz.
    [    1.840052] Switching to clocksource tsc
    [    1.870810] ata2.00: ATAPI: ATAPI   iHAS324   A, BL1P, max UDMA/100
    [    1.871244] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
    [    1.871275] ata1.01: HPA detected: current 625140335, native 625142448
    [    1.871278] ata1.01: ATA-7: SAMSUNG HD320LD, BQ100-14, max UDMA/100
    [    1.871280] ata1.01: 625140335 sectors, multi 16: LBA48 
    [    1.910744] ata2.00: configured for UDMA/100
    [    1.910842] ata1.01: configured for UDMA/100
    [    1.910986] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG HD320LD  BQ10 PQ: 0 ANSI: 5
    [    1.911136] sd 0:0:1:0: Attached scsi generic sg0 type 0
    [    1.911193] sd 0:0:1:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
    [    1.911225] sd 0:0:1:0: [sda] Write Protect is off
    [    1.911227] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
    [    1.911240] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.912553] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS324   A      BL1P PQ: 0 ANSI: 5
    [    1.916053] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.916056] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.916174] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    1.916235] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [    1.948395]  sda: sda1 sda2 < sda5 >
    [    1.948476] sda: p5 size 3667968 extends beyond EOD, enabling native capacity
    [    1.948526] ata1: soft resetting link
    [    2.040088] ata3: SATA link down (SStatus 0 SControl 300)
    [    2.040121] ata5: SATA link down (SStatus 0 SControl 300)
    [    2.040150] ata4: SATA link down (SStatus 0 SControl 300)
    [    2.040175] ata6: SATA link down (SStatus 0 SControl 300)
    [    2.111829] usb 3-3: new low speed USB device using ohci_hcd and address 2
    [    2.150487] ata1.01: n_sectors mismatch 625140335 != 625142448
    [    2.150490] ata1.01: new n_sectors matches native, probably late HPA unlock, n_sectors updated
    [    2.170589] ata1.01: configured for UDMA/100
    [    2.170594] ata1: EH complete
    [    2.170656] sd 0:0:1:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [    2.170922] sda: detected capacity change from 320071851520 to 320072933376
    [    2.213256]  sda: sda1 sda2 < sda5 >
    [    2.213504] sd 0:0:1:0: [sda] Attached SCSI disk
    [    2.228545] [drm] Initialized drm 1.1.0 20060810
    [    2.256141] [drm] radeon defaulting to kernel modesetting.
    [    2.256143] [drm] radeon kernel modesetting enabled.
    [    2.256275] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [    2.256280] radeon 0000:01:05.0: setting latency timer to 64
    [    2.257976] [drm] initializing kernel modesetting (RS780 0x1002:0x9616).
    [    2.258000] [drm] register mmio base: 0xFEAF0000
    [    2.258001] [drm] register mmio size: 65536
    [    2.258536] ATOM BIOS: B27722_RS780C
    [    2.258552] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
    [    2.258555] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
    [    2.258791] [drm] Detected VRAM RAM=256M, BAR=256M
    [    2.258794] [drm] RAM width 32bits DDR
    [    2.258864] [TTM] Zone  kernel: Available graphics memory: 897962 kiB.
    [    2.258865] [TTM] Initializing pool allocator.
    [    2.258880] [drm] radeon: 256M of VRAM memory ready
    [    2.258882] [drm] radeon: 512M of GTT memory ready.
    [    2.258897] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [    2.258898] [drm] Driver supports precise vblank timestamp query.
    [    2.258916] [drm] radeon: irq initialized.
    [    2.258918] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [    2.259647] [drm] Loading RS780 Microcode
    [    2.267087] radeon 0000:01:05.0: WB enabled
    [    2.299109] [drm] ring test succeeded in 1 usecs
    [    2.299193] [drm] radeon: ib pool ready.
    [    2.299247] [drm] ib test succeeded in 0 usecs
    [    2.299249] [drm] Enabling audio support
    [    2.299257] failed to evaluate ATIF got AE_BAD_PARAMETER
    [    2.299846] [drm] Radeon Display Connectors
    [    2.299847] [drm] Connector 0:
    [    2.299848] [drm]   VGA
    [    2.299850] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [    2.299851] [drm]   Encoders:
    [    2.299852] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
    [    2.299854] [drm] Connector 1:
    [    2.299854] [drm]   DVI-D
    [    2.299855] [drm]   HPD1
    [    2.299857] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [    2.299858] [drm]   Encoders:
    [    2.299859] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
    [    2.380383] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
    [    2.380491] generic-usb 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-3/input0
    [    2.389262] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input3
    [    2.389367] generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.0-3/input1
    [    2.389506] usbcore: registered new interface driver usbhid
    [    2.389508] usbhid: USB HID core driver
    [    2.405317] [drm] radeon: power management initialized
    [    2.536258] [drm] fb mappable at 0xD0141000
    [    2.536261] [drm] vram apper at 0xD0000000
    [    2.536262] [drm] size 5324800
    [    2.536263] [drm] fb depth is 24
    [    2.536264] [drm]    pitch is 5888
    [    2.536371] Console: switching to colour frame buffer device 180x56
    [    2.536392] fb0: radeondrmfb frame buffer device
    [    2.536393] drm: registered panic notifier
    [    2.536399] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
    [    2.823430] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
    [    2.825576] scsi 7:0:0:0: Direct-Access     HUAWEI   MMC Storage      2.31 PQ: 0 ANSI: 2
    [    2.837320] sr1: scsi-1 drive
    [    2.837433] sr 6:0:0:0: Attached scsi CD-ROM sr1
    [    2.837484] sr 6:0:0:0: Attached scsi generic sg2 type 5
    [    2.840621] sd 7:0:0:0: Attached scsi generic sg3 type 0
    [    2.848675] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [    2.895691] Btrfs loaded
    [    2.900446] xor: automatically using best checksumming function: generic_sse
    [    2.950009]    generic_sse: 12352.000 MB/sec
    [    2.950011] xor: using function: generic_sse (12352.000 MB/sec)
    [    2.951691] device-mapper: dm-raid45: initialized v0.2594b
    [    3.261086] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   15.705948] <30>udev[520]: starting version 167
    [   15.726268] Adding 1833980k swap on /dev/sda5.  Priority:-1 extents:1 across:1833980k 
    [   15.744799] lp: driver loaded but no devices found
    [   15.781726] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   15.782842] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   15.839069] MCE: In-kernel MCE decoding enabled.
    [   15.866039] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
    [   15.866042] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   15.875232] EDAC MC: Ver: 2.1.0 Apr 11 2011
    [   15.875515] parport_pc 00:06: reported by Plug and Play ACPI
    [   15.875567] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [   15.875833] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [   15.875893] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [   15.880772] EDAC amd64_edac: v3.3.0
    [   15.882284] EDAC amd64: DRAM ECC disabled.
    [   15.882293] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
    [   15.882294]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
    [   15.882295]  (Note that use of the override may cause unknown side effects.)
    [   15.950338] lp0: using parport0 (interrupt-driven).
    [   16.111566] ppdev: user-space parallel port driver
    [   16.132302] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   16.135533] usbcore: registered new interface driver usbserial
    [   16.135859] USB Serial support registered for generic
    [   16.136204] usbcore: registered new interface driver usbserial_generic
    [   16.136206] usbserial: USB Serial Driver core
    [   16.144649] USB Serial support registered for GSM modem (1-port)
    [   16.144694] option 1-5:1.0: GSM modem (1-port) converter detected
    [   16.144817] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0
    [   16.144835] option 1-5:1.3: GSM modem (1-port) converter detected
    [   16.144914] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1
    [   16.144923] option 1-5:1.4: GSM modem (1-port) converter detected
    [   16.144988] usb 1-5: GSM modem (1-port) converter now attached to ttyUSB2
    [   16.145026] usbcore: registered new interface driver option
    [   16.145027] option: v0.7.2:USB Driver for GSM modems
    [   16.204847] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   16.362731] atl1c 0000:02:00.0: irq 41 for MSI/MSI-X
    [   16.383479] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [   16.430498] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   16.561619] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
    [   17.392245] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [   19.069237] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [   19.991185] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
    [   45.737071] PPP BSD Compression module registered
    [   45.739141] PPP Deflate Compression module registered
    [ 2931.190121] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=66.94.240.25 DST=42.241.35.184 LEN=40 TOS=0x00 PREC=0x00 TTL=189 ID=28198 DF PROTO=TCP SPT=80 DPT=39764 WINDOW=0 RES=0x00 RST URGP=1 
    [ 3839.120132] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=98.137.48.23 DST=42.241.35.184 LEN=40 TOS=0x00 PREC=0x00 TTL=189 ID=49197 DF PROTO=TCP SPT=80 DPT=37438 WINDOW=0 RES=0x00 RST URGP=1 
    [ 3864.900138] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=98.137.48.23 DST=42.241.35.184 LEN=40 TOS=0x00 PREC=0x00 TTL=189 ID=49470 DF PROTO=TCP SPT=80 DPT=37438 WINDOW=0 RES=0x00 RST URGP=1 
    [ 4438.360135] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=98.137.49.1 DST=42.241.35.184 LEN=40 TOS=0x00 PREC=0x00 TTL=189 ID=60181 DF PROTO=TCP SPT=80 DPT=43114 WINDOW=0 RES=0x00 RST URGP=1 
    [ 4468.560136] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=98.137.49.1 DST=42.241.35.184 LEN=40 TOS=0x00 PREC=0x00 TTL=189 ID=60500 DF PROTO=TCP SPT=80 DPT=43114 WINDOW=0 RES=0x00 RST URGP=1
    I still don't think it is everything is listed, but it is all that comes through
    Last edited by jayd512; 02-18-2012 at 10:53 PM. Reason: added code tags

  9. #8
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Ok, a bit of luck here I hope. This guy talks about getting it working on Gentoo. Give it a shot and report back please.
    Installing the O2 surfstick on Gentoo Linux
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  10. #9
    Just Joined!
    Join Date
    Sep 2010
    Posts
    30
    Unfortunately that did not work either. When I right click the icon it scans the drive and within moments reports that it can find no network.

    I'm starting to think I can't get connected through the live cd, which makes installing difficult.

  11. #10
    Linux Newbie
    Join Date
    Aug 2009
    Posts
    156
    I am replying more to understand Gentoo and I plan to configure my Clear usb mobile modem. I am not sure if you are trying to connect with a similar modem. From my system rescue disk. I am given the option to do net-setup eth0. I am not sure if that would work on a usb modem, or if there is an alernate program. I have not worked with live DVD. From what I understand of Mikes comments, is that some preconfiguration needs to be done. And some changes can be made with out Net support. I only know of Clear, and Verizon that offer 3G and 4G. Verizon seems to have more links to troubleshoot their particular usb Modem.

    I did some trial runs with my Sierra Clearn usb modem. and System Rescue disk. The disk detects the modem. I am able to do modprobe sierra. I am not sure if you are able to modprobe a module related to your modem. But please follow Mikes suggestion, rather than mine, he has much more knowledge and experience than I. I hope I don't confuse the thread.

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •