tv card with radio tuner not working

[paulmedic555]

Hi all i have a tv card with radio tuner which i want to make it work but i can't.The tv card is

PROLINK PLAY TV PRO ULTRA PV-TV304P

and it is based on Bt878 chipset.I configure ok the kernel (i think) and after i restart my pc i load v4l extension in my xorg.conf and i load the bttv module.Now here are some commands outputs

lspci

0000:00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capt ure (rev 11)
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at ea001000 (32-bit, prefetchable)
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

0000:00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (r ev 11)
        Flags: bus master, medium devsel, latency 32, IRQ 10
        Memory at ea002000 (32-bit, prefetchable)
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

lsmod

Module                  Size  Used by
bttv                  147408  0
video_buf              17796  1 bttv
firmware_class          7936  1 bttv
i2c_algo_bit            9096  1 bttv
btcx_risc               4104  1 bttv
tveeprom               11800  1 bttv
snd_via82xx_modem      12580  0
snd_via82xx            23200  2
snd_mpu401_uart         6528  1 snd_via82xx
snd_rawmidi            20640  1 snd_mpu401_uart
snd_bt87x              12104  0
nvidia               3466300  12

dmesg

bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 32, mmio: 0xea001000
bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init]
tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0

Tv is working but radio don't any idea how can made it to work?

[Nerderello]

there are a number of possible card types that v4l supports. You can force the card number when you do a modprobe. As you can see from your output

bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]

No card type is being detected.

There is a list of card types in the documentation section of the kernel source (under something like /usr/linux/src/docs/v4l or something like that).

Nerderello