Find the answer to your Linux question:
Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 23
Hi gruven, I managed having gnome-light started but still having some problem. Steps peformed as follows; # echo x11-libs/cairo x >> /etc/portage/package.use # emerge --oneshot x-11libs/cairo # equery check gnome-base/gnome-session ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #11
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790

    Hi gruven,

    I managed having gnome-light started but still having some problem.

    Steps peformed as follows;

    # echo x11-libs/cairo x >> /etc/portage/package.use
    # emerge --oneshot x-11libs/cairo

    # equery check gnome-base/gnome-session
    gnome-session not found

    # emerge gnome-session
    and manually upgraded 16 conf files.

    # emerge gdm
    and manually upgraded 14 conf files.

    # /etc/init.d/xdm stop && /etc/init.d/xdm start

    # nano /etc/rc.conf
    un-commented DISPLAYMANAGER="xdm"
    and changed "xdm" to "gdm"


    rebooted PC. Display manager started with login page displayed.

    Login as root

    Gnome-light started with its logo displaying a while and faded out with following warning:
    Code:
    - There was an error starting Gnome Settings Daemon
    - Something such as themes, sounds, or background setting   
      may not work correct
    - The Setting Daemon restarted too many times
    - The last error message was
      There was an unknown activation error
      Gnome will still try to restort the Settings Daemon next
      time your login

    Evoked Xterm window
    # shutdown -r now

    Gnome-light started and died as previously.

    Your advice noted with tks.


    B.R.
    satimis

  2. #12
    Linux Enthusiast gruven's Avatar
    Join Date
    Dec 2004
    Location
    Arkansas
    Posts
    541
    If it were me, I would emerge all of gnome, to make sure I got what I needed. Gnome-light has been known to be broken before. But, do the following things before you do. They may just be able to solve your problem.

    Make sure your "X" use flag is upper case, and put it in /etc/make.conf. That way, all of your programs that have the option to have gui's will have them, and will use X.

    The gnome-settings daemon problem I have actually had before, but I don't remember what I had to recompile for it to work.

    I would run a
    Code:
    revdep-rebuild
    to see if you have any broken links or libs. That will re-emerge what you need to make your system stable. You could also try to delete the .gconf, .gcond and all the .gnome directories in your home folder. That will put gnome back to default.

    Linux User #376741
    Code is Poetry

  3. #13
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790
    Hi gruven,

    Tks for your advice.

    Now I have Gnome-light up but PC hanging quite often (I think it was caused by SeaMonkey, the browser). Steps performed as following;

    - rechecked /etc/make.conf to confirm "X" (upper case) being there
    - ran "revdep-rebuild"
    - ran "emerge gnome-light"
    - update conf files
    - rebooted PC
    - login as user
    - gnome-light 2.14 started
    (a warning popup:
    The panel encountered a problem while loading
    "OAFHD:GBOME_Miexer Applet"
    Delete)
    Deleted the file

    What is the file for?

    gedit is not available.

    Checking /var/log/messages, found following problems

    1)
    Sep 8 11:20:08 localhost dhcpcd[4191]: timed out waiting for a valid DHCP $$ service net.eth0
    Sep 8 11:20:08 localhost rc-scripts: netmount was not started.

    2)
    Sep 8 11:33:44 localhost dhcpcd[4135]: timed out waiting for a valid DHCP $

    Please advise how to disable them. Whenever connecting to ISP dynamic IP is alloted. TIA

    Screen resolution:
    My LCD monitor supports "1280x1024"

    /etc/X11/xorg.conf
    Code:
    ....
    Section "Screen"
            Identifier "Screen0"
            Device     "Card0"
            Monitor    "Monitor0"
            DefaultDepth    24
            SubSection "Display"
                    Viewport   0 0
                    Depth     1
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     4
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     8
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     15
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     16
                    Modes     "1280x1024"
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     24
                    Modes     "1280x1024"
            EndSubSection
    It didn't display correctly. I don't think it is displaying "1280x1024" resolution, having large fonts.

    If it were me, I would emerge all of gnome, to make sure I got what I needed. Gnome-light has been known to be broken before
    I just test Gnome-light. My HD has plenty space-40G. After test finished, can I emerge Gnome to replace Gnome-light by running "emerge gnome"? Tks.

    B.R.
    satimis

  4. #14
    Linux Enthusiast gruven's Avatar
    Join Date
    Dec 2004
    Location
    Arkansas
    Posts
    541
    The error you are having loading the mixer applet means the mixer applet isn't available to load probably. Gedit isn't available because it probably isn't included in gnome-light.

    When you emerge the full gnome, then it should install the programs you expect to be there.

    This command will get you the full gnome:
    Code:
    emerge -C gnome-light && emerge gnome
    What that will do is take gnome-light out of the world file and replace it with gnome. It won't actually uninstall anything except the meta-package gnome-light.

    To fix the resolution problems, you will have to run
    Code:
    xorgconfig
    and go through all of the steps picking the options you want. Then, install the correct video drivers for your video card (there is a link in my sig that will help you find the how-to for that). Then, you will have to restart X. That should get you what you want.

    One last thing, I would suggest you run an
    Code:
    emerge -uDN world
    That will update your system with the new use flags you defined in your make.conf. I can help you with your fonts once you get your desktop like you like it.

    I also recall that gnome has rather large fonts by default.

    Linux User #376741
    Code is Poetry

  5. #15
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790
    Hi gruven,

    This command will get you the full gnome:
    Code:
    emerge -C gnome-light && emerge gnome
    Just read "MAN emerge 1"
    http://gentoo-wiki.com/MAN_emerge_1
    Code:
    --unmerge (-C)
        WARNING: This action can remove important packages! Removes all matching
    packages. This does no checking of dependencies, so it may remove packages
    necessary for the proper operation of your system. Its arguments can be ebuilds, sets, 
    or dependencies -- see --clean above for examples.
    
    --clean (-c)
        Cleans the system by removing packages that will not affect the functionality of the 
    system. The arguments can be ebuilds, sets, or dependencies. For example, emerge 
    clean binutils cleans out old versions of binutils; emerge --clean net-www/mozilla-0.9.9-r2
    cleans out that specific version of Mozilla. This is generally safe to use. Note that --clean
    does not remove unslotted packages.
    Would it be safer to run;
    Code:
    # emerge --clean net-www/gnome-light-2.14 && emerge gnome
    To fix the resolution problems, you will have to run
    Code:
    xorgconfig
    and go through all of the steps picking the options you want.
    I ran it before. Because some technical data not available I cancelled it finally. I have Philips 19" LCD Display (190B).

    I checked /etc/X11/xorg.conf before. Most data entered automatically at time of installing gnome-light were correct except "Screen" section. The item "Modes" disappeared. I added "Modes "1280x1024" immediate below the line "Depth 16" and "Depth 24" respectively.

    Remark:
    Code:
    I ran;
    X -config /root/xorg.conf.new
    created a working xorg.conf
    
    Then;
    
    # cp /root/xorg.conf.new /etc/X11/xorg.conf
    Following is /etc/X11/xorg.conf of FC5
    Code:
    Section "Screen"
            Identifier "Screen0"
            Device     "Videocard0"
            Monitor    "Monitor0"
            DefaultDepth     24
            SubSection "Display"
                    Viewport   0 0
                    Depth     16
                    Modes    "800x600" "640x480"
            EndSubSection
            SubSection "Display"
                    Viewport   0 0
                    Depth     24
                    Modes    "1024x768" "800x600" "640x480"
            EndSubSection
    EndSection
    I'm now working on FC5 32bits PC connected to a 15" NEC LCD Display. I think the entries of Modes would similar except resolution figure.

    One last thing, I would suggest you run an
    Code:
    emerge -uDN world
    That will update your system with the new use flags you defined in your make.conf.
    I'll run this command later.

    I also recall that gnome has rather large fonts by default
    How to check whether the screen resolution is correct, preferrable "1280x1024". Tks

    Others noted with tks.

    B.R.
    satimis

  6. #16
    Linux Enthusiast gruven's Avatar
    Join Date
    Dec 2004
    Location
    Arkansas
    Posts
    541
    No, it wouldn't be safer to run --clean. Gnome-light is just a meta package that pulls in dependencies, and "emerge -C gnome-light" will only remove that one package. Gnome-light is not slotted so the --clean option will do nothing. You don't even have to remove gnome-light, but it will give you trouble if you ever try to remove gnome. I like to keep a clean world file, but your ideas may be different.

    If you don't use the xorgconfig utility in gentoo, then I can't guarantee that your xorg.conf will work correctly. If you are using a working config from another distro, that distro may use different directories or a different version calling for different things. Sometimes it works, and sometimes it doesn't.

    Until you run the update for your sytem, and use the new use flags you have put in make.conf, things may not work the way you want them.

    I am sorry, but until your system is updated and configured correctly, I can't help anymore. I don't mean to be rude, but if you don't follow my advice then we won't get very far. I am not saying my advice is always correct, but I always try my best to help.

    Linux User #376741
    Code is Poetry

  7. #17
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790
    Hi gruven,

    Ran
    # emerge -uDN world
    It went through w/o complaint

    The Philips 190BC6G LCD display did not come with hard copy of spec and users' manual and nor soft copy. I have been searching for it on Internet. Today I got them from local Philips support office

    Ran "xorgconfig" 4 times and can't get "xorg.conf" to work. Neither can get "gdm"started at booting.

    $ cat /etc/X11/xorg.conf
    Code:
    ....
    .....
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    EndSection
    
    Section "Files"
    
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/75dpi"
        FontPath   "/usr/share/fonts/100dpi"
    #    FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    
    EndSection
    
    Section "ServerFlags"
    
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"kbd"
    
    #    Option     "Protocol"      "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xorg"
        Option "XkbModel"	"pc101"
        Option "XkbLayout"	"us"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver	"mouse"
        Option "Protocol"    "PS/2"	# PS/2 Mouse
        Option "Device"      "/dev/input/mice"
    
        Option "ZAxisMapping"   "4 5 6 7"
    
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    Section "Monitor"
    
        Identifier  "Philips 190B6CG"
    
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        HorizSync   30-83
    
    #    HorizSync	30-64         # multisync
    #    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies
    
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    
        VertRefresh 56-76
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier	"Standard VGA"
        VendorName	"Unknown"
        BoardName	"Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset	"generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver     "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    
    #    BusID      "PCI:0:10:0"
    
    #    VideoRam	256
    
    #    Clocks	25.2 28.3
    
    EndSection
    
    # Device configured by xorgconfig:
    
    Section "Device"
        Identifier  "Gigabyte"
        Driver      "vga"
    	# unsupported card
        VideoRam    256000
        # Insert Clocks lines here if appropriate
    EndSection
    
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "Gigabyte"
        Monitor     "Philips 190B6CG"
        DefaultDepth 24
    
        Subsection "Display"
            Depth       8
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    #    Mode 0666
    # EndSection
    1) I have to manually edited hsync and vsync. Because I can't select them from the ranges provided.

    2) VideoRam also has to be uncomment manually and added "K" after "256000". Eventhough this value has been entered on running "xorgconfig"

    3) I can't find the needed locale from its list.

    Others noted with tks.

    B.R.
    satimis

  8. #18
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790
    Hi gruven,

    After manually editing /etc/X11/xorg.conf several times, now I got a working xorg.conf.

    # grep irtual /var/log/Xorg.0.log
    Code:
    (--) NV(0): Virtual size is 1280x1024 (pitch 1280)
    correct resolution

    /etc/X11/xorg.conf
    Code:
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"   # Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the font modules
         Load        "freetype"
    
    EndSection
    
    # **********************************************************************
    # Files section.  This allows default font and rgb paths to be set
    # **********************************************************************
    
    Section "Files"
    
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/75dpi"
        FontPath   "/usr/share/fonts/100dpi"
    #   FontPath   "/usr/share/fonts/TTF"
        FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    
    EndSection
    
    # **********************************************************************
    # Core keyboard's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
        Identifier  "Keyboard1"
        Driver      "kbd"
    
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option     "Protocol"      "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option     "Xleds"      "1 2 3"
    
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"   "xorg"
        Option "XkbModel"   "pc101"
        Option "XkbLayout"  "us"
    
    EndSection
    
    
    # **********************************************************************
    # Core Pointer's InputDevice section
    # **********************************************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier  "Mouse1"
        Driver      "mouse"
        Option "Protocol"    "PS/2" # PS/2 Mouse
        Option "Device"      "/dev/input/mice"
    
    
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    
        Option "ZAxisMapping"   "4 5 6 7"
    
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
    
        Identifier  "Philips 190B6CG"
    
        HorizSync   30-83
    
        VertRefresh 56-76
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
    
        Identifier  "Card0"
        Driver      "nv"
    
    EndSection
    
    Section "Device"
        Identifier  "Gigabyte"
    #   Driver      "vga"
        Driver      "nv"
            # unsupported card
        VideoRam    256000
        # Insert Clocks lines here if appropriate
    EndSection
    
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen 1"
        Device      "Gigabyte"
        Monitor     "Philips 190B6CG"
        DefaultDepth 24
    
        Subsection "Display"
            Depth       8
    
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       16
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
        Subsection "Display"
            Depth       24
            Modes       "1280x1024" "1024x768" "800x600" "640x480"
            ViewPort    0 0
        EndSubsection
    EndSection
    
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Simple Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    
        Screen "Screen 1"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    # Section "DRI"
    #    Mode 0666
    # EndSection
    The remaining problem is PC hanging frequently. Any suggestion. TIA

    B.R.
    satimis

  9. #19
    Linux Enthusiast gruven's Avatar
    Join Date
    Dec 2004
    Location
    Arkansas
    Posts
    541
    The first thing I would do is recompile the program that is giving me problems.

    Another question, is that have you updated your compiler to 4.1.1 yet? I know it went stable not too long ago, and not sure if you are using it or not.

    Ok, I read on another thread that it was seamonkey giving you the problems. Have you noticed anything else giving you problems? Have you tried the official nvidia drivers?

    I am just covering the basics here. If there is anything else that you think would be helpful, no matter how small, please include it. Try running the problem application in the terminal and noting the output it gives when it crashes.

    Linux User #376741
    Code is Poetry

  10. #20
    Linux Guru
    Join Date
    Sep 2004
    Posts
    1,790
    Hi gruven,

    The first thing I would do is recompile the program that is giving me problems.
    I think most likely the hanging was caused by the mouse. Can I try another protocol? If YES please advise how to make the change.

    $ cat /etc/X11/xorg.conf
    Code:
    .....
    Section "InputDevice"
    
    # Identifier and driver
    
        Option "Protocol"    "PS/2" # PS/2 Mouse
        Option "Device"      "/dev/input/mice"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"  "Xqueue"
    
    # Mouse-speed setting for PS/2 mouse.
    
    #    Option "Resolution"        "256"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"  "9600"
    #    Option "SampleRate"        "150"
    
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    
        Option "ZAxisMapping"   "4 5 6 7"
    
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
        Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    .....
    TIA

    [quote]Another question, is that have you updated your compiler to 4.1.1 yet? I know it went stable not too long ago, and not sure if you are using it or not.[quote]
    Which compiler? What command shall I run?

    Others noted with tks.

    B.R.
    satimis

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •