ATI Radeon M300 on Dell inspiron 9300 Laptop

I'm at wits end trying to get anything working on this new box.

According to lspci I have a ATI Radeon M300, I have followed all the tutorials on getting ATI support working with no luck.

When I try and emerge x11-drivers/ati-drivers I get:

Code:

---

>>> Emerging (1 of 1) x11-drivers/ati-drivers-8.27.10-r1 to /
 * ati-driver-installer-8.27.10-x86.run MD5 ;-) ...                      [ ok ]
 * ati-driver-installer-8.27.10-x86.run RMD160 ;-) ...                    [ ok ]
 * ati-driver-installer-8.27.10-x86.run SHA1 ;-) ...                      [ ok ]
 * ati-driver-installer-8.27.10-x86.run SHA256 ;-) ...                    [ ok ]
 * ati-driver-installer-8.27.10-x86.run size ;-) ...                      [ ok ]
 * checking ebuild checksums ;-) ...                                      [ ok ]
 * checking auxfile checksums ;-) ...                                    [ ok ]
 * checking miscfile checksums ;-) ...                                    [ ok ]
 * checking ati-driver-installer-8.27.10-x86.run ;-) ...                  [ ok ]
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *    /usr/src/linux
 * Found kernel object directory:
 *    /lib/modules/2.6.18-gentoo-r6/build
 * Found sources for kernel version:
 *    2.6.18-gentoo-r6
 * Checking for MTRR support enabled ...                                  [ ok ]
 * Checking for AGP support enabled ...                                  [ ok ]
 * Checking for DRM support disabled ...                                  [ ok ]
 * X11 implementation is xorg-x11.
>>> Unpacking source...
 * Unpacking Ati drivers ...                                              [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/ati-drivers-8.27.10-r1 ...
 * Building the DRM module...
make: Entering directory `/usr/src/linux-2.6.18-gentoo-r6'
  CC [M]  /var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.o
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c:233: error: 'UTS_RELEASE' undeclared here (not in a function)
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c: In function 'firegl_stub_open':
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c:559: warning: assignment discards qualifiers from pointer target type
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c: In function '__ke_vm_map':
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3159: error: 'VM_SHM' undeclared (first use in this function)
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3159: error: (Each undeclared identifier is reported only once
/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.c:3159: error: for each function it appears in.)
make[1]: *** [/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod/firegl_public.o] Error 1
make: *** [_module_/var/tmp/portage/ati-drivers-8.27.10-r1/work/common/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.18-gentoo-r6'
 * DRM module not built
>>> Source compiled.
>>> Test phase [not enabled]: x11-drivers/ati-drivers-8.27.10-r1

>>> Install ati-drivers-8.27.10-r1 into /var/tmp/portage/ati-drivers-8.27.10-r1/image/ category x11-drivers
 * Installing fglrx module
install: cannot stat `fglrx.ko': No such file or directory

!!! ERROR: x11-drivers/ati-drivers-8.27.10-r1 failed.
Call stack:
  ebuild.sh, line 1546:  Called dyn_install
  ebuild.sh, line 1020:  Called src_install
  ati-drivers-8.27.10-r1.ebuild, line 205:  Called linux-mod_src_install
  linux-mod.eclass, line 540:  Called die

!!! doins fglrx.ko failed
!!! If you need support, post the topmost build error, and the call stack if relevant.

---

I have tried adding support as a module and as directly compiled.
When I run modprobe fglrx I get "FATAL: Module fglrx not found"

I am fairly new to gentoo and would appriciate any help one would give. Please let me know what I can post to help you help me.

My AIM screen name is phr0zen84, if you contact me and help me solve this I will be sure and post the solution for others to view.

Thanks

So I ended up breaking down and making a full liveCD instead of a min-install cd just to see if gentoo could get X to work from there. Worked fine so I used the console installer to re-install my system. I feel kinda cheap since I was so close to completing the install from the minimal cd. Oh well. I would still like to understand how the install wizard solved this problem so I could try and understand it. If anyone has any insight let me know.


Thanks anyone who looked at this.

This page describes the cause for your problem, and a possible solution:

http://kerneltrap.org/node/7386

Another solution is toi use a later ATI driver that has been updated to find the UTS_RELEASE define in the new location. ATI driver version 8.32.5 appears to work, for one.