Results 1 to 1 of 1
Right now I'm trying to get my Winfast TV2000 XP TV Tuner (NTSC) to work on my Mandriva Spring (2007.1) and I can't seem to get it to work. Mandriva ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 10-31-2007 #1
- Join Date
- Oct 2007
Problems with Winfast Tv2000 XP Tuner
Right now I'm trying to get my Winfast TV2000 XP TV Tuner (NTSC) to work on my Mandriva Spring (2007.1) and I can't seem to get it to work. Mandriva seems to detect it, but when I start up a tv program like Tv Time I get a blue screen that says no signal and when I use KDETV scanning for channels brings up nothing. Here is my dmesg output
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
bttv: driver version 0.9.16 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 11, latency: 32, mmio: 0xe2018000
bttv0: detected: Leadtek TV 2000 XP [card=34], PCI subsystem ID is 107d:6609
bttv0: using: Askey CPH05X/06X (bt87 [many vendors] [card=24,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003ff502 [init]
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=24) as /class/input/input2
bttv-input: bttv IR (card=24) detected at pci-0000:00:08.0/ir0
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:08.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
bt878_probe: card id=[0x6609107d], Unknown card.
ACPI: PCI interrupt for device 0000:00:08.1 disabled
bt878: probe of 0000:00:08.1 failed with error -22
By the way I did try to edit the modprobe.conf so the defaults were originally tuner=5 and the card=34
any help with this would be greatly appreciated. Sorry if I left out any Important details I am new to linux and have been a winblows user for most my life.