Trying to get a Peak tv/multimedia card going. Have not got the remotest idea how to do this. How do I find out the card number, if that's important?

Below is a load of stuff, don't know how relevant. How is this job done - most important thing is getting analog television?

Code:
This is xawtv-3.95.dfsg.1, running on Linux/x86_64 (2.6.18-6-amd64)
looking for available devices
Xvideo: 2 adaptors available.
Xvideo: video4linux: input video, ports 224-224
port 224-224                            [ -xvport 224 ]
    type : Xvideo, video overlay
    name : video4linux

Xvideo: NV17 Video Texture: input image, ports 225-256
port 225-256
    type : Xvideo, image scaler
    name : NV17 Video Texture

vid-open: trying: v4l2-old... 
vid-open: failed: v4l2-old
vid-open: trying: v4l2... 
ioctl: VIDIOC_QUERYCAP(driver="saa7134";card="UNKNOWN/GENERIC";bus_info="PCI:0000:01:06.0";version=0.2.14;capabilities=0x5000015 [VIDEO_CAPTURE,VIDEO_OVERLAY,VBI_CAPTURE,READWRITE,STREAMING]): ok
v4l2: open
v4l2: device info:
  saa7134 0.2.14 / UNKNOWN/GENERIC @ PCI:0000:01:06.0
ioctl: VIDIOC_ENUMINPUT(index=0;name="default";type=CAMERA;audioset=1;tuner=0;std=0xffbdff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,PAL_Nc,PAL_60,NTSC_M,NTSC_M_JP,?,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB];status=0x10100 [NO_H_LOCK,NO_SYNC]): ok
ioctl: VIDIOC_ENUMINPUT(index=1;name="";type=unknown;audioset=0;tuner=0;std=0x0 [];status=0x0 []): Invalid argument
ioctl: VIDIOC_ENUMSTD(index=0;id=0xff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K];name="PAL";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=1;id=0x7 [PAL_B,PAL_B1,PAL_G];name="PAL-BG";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=2;id=0x10 [PAL_I];name="PAL-I";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=3;id=0xe0 [PAL_D,PAL_D1,PAL_K];name="PAL-DK";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=4;id=0xb000 [NTSC_M,NTSC_M_JP,?];name="NTSC";frameperiod.numerator=1001;frameperiod.denominator=30000;framelines=525): ok
ioctl: VIDIOC_ENUMSTD(index=5;id=0xff0000 [SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB];name="SECAM";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=6;id=0x100 [PAL_M];name="PAL-M";frameperiod.numerator=1001;frameperiod.denominator=30000;framelines=525): ok
ioctl: VIDIOC_ENUMSTD(index=7;id=0x400 [PAL_Nc];name="PAL-Nc";frameperiod.numerator=1;frameperiod.denominator=25;framelines=625): ok
ioctl: VIDIOC_ENUMSTD(index=8;id=0x800 [PAL_60];name="PAL-60";frameperiod.numerator=1001;frameperiod.denominator=30000;framelines=525): ok
ioctl: VIDIOC_ENUMSTD(index=9;id=0x0 [];name="";frameperiod.numerator=0;frameperiod.denominator=0;framelines=0): Invalid argument
ioctl: VIDIOC_ENUM_FMT(index=0;type=VIDEO_CAPTURE;flags=0;description="8 bpp gray";pixelformat=0x59455247 [GREY]): ok
ioctl: VIDIOC_ENUM_FMT(index=1;type=VIDEO_CAPTURE;flags=0;description="15 bpp RGB, le";pixelformat=0x4f424752 [RGBO]): ok
ioctl: VIDIOC_ENUM_FMT(index=2;type=VIDEO_CAPTURE;flags=0;description="15 bpp RGB, be";pixelformat=0x51424752 [RGBQ]): ok
ioctl: VIDIOC_ENUM_FMT(index=3;type=VIDEO_CAPTURE;flags=0;description="16 bpp RGB, le";pixelformat=0x50424752 [RGBP]): ok
ioctl: VIDIOC_ENUM_FMT(index=4;type=VIDEO_CAPTURE;flags=0;description="16 bpp RGB, be";pixelformat=0x52424752 [RGBR]): ok
ioctl: VIDIOC_ENUM_FMT(index=5;type=VIDEO_CAPTURE;flags=0;description="24 bpp RGB, le";pixelformat=0x33524742 [BGR3]): ok
ioctl: VIDIOC_ENUM_FMT(index=6;type=VIDEO_CAPTURE;flags=0;description="24 bpp RGB, be";pixelformat=0x33424752 [RGB3]): ok
ioctl: VIDIOC_ENUM_FMT(index=7;type=VIDEO_CAPTURE;flags=0;description="32 bpp RGB, le";pixelformat=0x34524742 [BGR4]): ok
ioctl: VIDIOC_ENUM_FMT(index=8;type=VIDEO_CAPTURE;flags=0;description="32 bpp RGB, be";pixelformat=0x34424752 [RGB4]): ok
ioctl: VIDIOC_ENUM_FMT(index=9;type=VIDEO_CAPTURE;flags=0;description="4:2:2 packed, YUYV";pixelformat=0x56595559 [YUYV]): ok
ioctl: VIDIOC_ENUM_FMT(index=10;type=VIDEO_CAPTURE;flags=0;description="4:2:2 packed, UYVY";pixelformat=0x59565955 [UYVY]): ok
ioctl: VIDIOC_ENUM_FMT(index=11;type=VIDEO_CAPTURE;flags=0;description="4:2:2 planar, Y-Cb-Cr";pixelformat=0x50323234 [422P]): ok
ioctl: VIDIOC_ENUM_FMT(index=12;type=VIDEO_CAPTURE;flags=0;description="4:2:0 planar, Y-Cb-Cr";pixelformat=0x32315559 [YU12]): ok
ioctl: VIDIOC_ENUM_FMT(index=13;type=VIDEO_CAPTURE;flags=0;description="4:2:0 planar, Y-Cb-Cr";pixelformat=0x32315659 [YV12]): ok
ioctl: VIDIOC_ENUM_FMT(index=14;type=VIDEO_CAPTURE;flags=0;description="";pixelformat=0x00000000 [....]): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963776;type=INTEGER;name="Brightness";minimum=0;maximum=255;step=1;default_value=128;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=9963777;type=INTEGER;name="Contrast";minimum=0;maximum=127;step=1;default_value=68;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=9963778;type=INTEGER;name="Saturation";minimum=0;maximum=127;step=1;default_value=64;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=9963779;type=INTEGER;name="Hue";minimum=-128;maximum=127;step=1;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=9963781;type=INTEGER;name="Volume";minimum=-15;maximum=15;step=1;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=9963785;type=BOOLEAN;name="Mute";minimum=0;maximum=1;step=0;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=9963796;type=BOOLEAN;name="Mirror";minimum=0;maximum=1;step=0;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=0;type=unknown;name="42";minimum=0;maximum=0;step=0;default_value=0;flags=1): ok
ioctl: VIDIOC_QUERYCTRL(id=9963800;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963801;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963802;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963803;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963804;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963805;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963806;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=9963807;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217728;type=BOOLEAN;name="Invert";minimum=0;maximum=1;step=0;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=134217729;type=INTEGER;name="y offset odd field";minimum=0;maximum=128;step=0;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=134217730;type=INTEGER;name="y offset even field";minimum=0;maximum=128;step=0;default_value=0;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=134217731;type=BOOLEAN;name="automute";minimum=0;maximum=1;step=0;default_value=1;flags=0): ok
ioctl: VIDIOC_QUERYCTRL(id=134217732;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217733;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217734;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217735;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217736;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217737;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217738;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217739;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217740;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217741;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217742;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217743;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217744;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217745;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217746;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217747;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217748;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217749;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217750;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217751;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217752;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217753;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217754;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217755;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217756;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217757;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217758;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
ioctl: VIDIOC_QUERYCTRL(id=134217759;type=unknown;name="";minimum=0;maximum=0;step=0;default_value=0;flags=0): Invalid argument
vid-open: ok: v4l2
/dev/video0: OK                         [ -device /dev/video0 ]
    type : v4l2
    name : UNKNOWN/GENERIC
    flags: overlay capture  
v4l2: close
dmesg; ?important bit in red font.
Code:
Bootdata ok (command line is root=/dev/sda2 ro )
Linux version 2.6.18-6-amd64 (Debian 2.6.18.dfsg.1-18etch1) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Feb 10 17:50:19 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
 BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
 BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
 BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
DMI 2.4 present.
ACPI: RSDP (v002 Nvidia                                ) @ 0x00000000000f6f50
ACPI: XSDT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000cfee3100
ACPI: FADT (v003 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000cfee9d40
ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x00000000cfee9f80
ACPI: HPET (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x00000000cfeea280
ACPI: MCFG (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000cfeea300
ACPI: MADT (v001 Nvidia ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000cfee9e80
ACPI: DSDT (v001 NVIDIA ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 0000000130000000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-0000000130000000
On node 0 totalpages: 1030280
  DMA zone: 3056 pages, LIFO batch:0
  DMA32 zone: 833304 pages, LIFO batch:31
  Normal zone: 193920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x10de8201 base: 0xfefff000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
Built 1 zonelists.  Total pages: 1030280
Kernel command line: root=/dev/sda2 ro 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
time.c: Detected 2613.616 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 6ee0000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 4044224k/4980736k available (1927k kernel code, 148540k reserved, 868k data, 176k init)
Calibrating delay using timer specific routine.. 5230.40 BogoMIPS (lpj=10460805)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12565479
Detected 12.565 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5226.85 BogoMIPS (lpj=10453704)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 03
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 575 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=168
checking if image is initramfs... it is
Freeing initrd memory: 4901k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
hpet0: at MMIO 0xfefff000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
pnp: 00:01: ioport range 0x4400-0x447f has been reserved
pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:01: ioport range 0x4800-0x487f has been reserved
pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:0c' and the driver 'system'
pnp: match found with the PnP device '00:0d' and the driver 'system'
PCI: Bridge: 0000:00:09.0
  IO window: a000-afff
  MEM window: fdf00000-fdffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
  IO window: 9000-9fff
  MEM window: f8000000-fbffffff
  PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1210116555.356:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfefff000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:0b' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 176k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Fan [FAN] (on)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Expecting a [Reference] package element, found type EECDF5FF
ACPI: Invalid passive threshold
ACPI: Thermal Zone [THRM] (40 C)
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
GSI 16 sharing vector 0xD1 and IRQ 16
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 209
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 209
scsi0 : sata_nv
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
ieee1394: Initialized config rom entry `ip1394'
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
GSI 17 sharing vector 0xD9 and IRQ 17
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 217
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 217
scsi2 : sata_nv
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
ata3.00: ata3: dev 0 multi count 1
ata3.00: configured for UDMA/133
scsi3 : sata_nv
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI, max UDMA/33
ata4.00: configured for UDMA/33
  Vendor: ATA       Model: MAXTOR STM325031  Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: TSSTcorp  Model: CDDVDW TS-H653N   Rev: 0208
  Type:   CD-ROM                             ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
GSI 18 sharing vector 0xE1 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 21 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 225, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
GSI 19 sharing vector 0xE9 and IRQ 19
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
ohci_hcd 0000:00:02.0: wakeup
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
USB Mass Storage support registered.
eth0: forcedeth.c: subsystem: 01043:812a bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 20 sharing vector 0x32 and IRQ 20
ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 50
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[50]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 > sda4
sd 2:0:0:0: Attached scsi disk sda
usb 2-7: new full speed USB device using ohci_hcd and address 2
usb 2-7: configuration #1 chosen from 1 choice
Probing IDE interface ide1...
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0000128426]
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
input: PC Speaker as /class/input/input1
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:09' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 21 sharing vector 0x3A and IRQ 21
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
saa7133[0]: found at 0000:01:06.0, rev: 209, irq: 58, latency: 32, mmio: 0xfdffe000
saa7133[0]: subsystem: 17de:7253, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 100
saa7133[0]: i2c eeprom 00: de 17 53 72 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
usbcore: registered new driver snd-usb-audio
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
ts: Compaq touchscreen protocol output
Adding 3903752k swap on /dev/sda8.  Priority:-1 extents:1 across:3903752k
EXT3 FS on sda2, internal journal
loop: loaded (max 8 devices)
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 22 sharing vector 0x42 and IRQ 22
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 66
nvidiafb: Device ID: 10de0404 
nvidiafb: unknown NV_ARCH
nvidia: module license 'NVIDIA' taints kernel.
  Vendor: DVDRW     Model: USB H16X          Rev: B02K
  Type:   CD-ROM                             ANSI SCSI revision: 00
sr1: scsi3-mmc drive: 8x/48x writer dvd-ram cd/rw xa/form2 cdda tray
sr 4:0:0:0: Attached scsi CD-ROM sr1
sr 4:0:0:0: Attached scsi generic sg2 type 5
usb-storage: device scan complete
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.09  Sat May 26 00:43:07 PDT 2007
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xfdffe000 irq 58 registered as card -1
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth1: no link during initialization.
pktcdvd: writer pktcdvd0 mapped to sr0
pktcdvd: writer pktcdvd1 mapped to sr1
usb 1-1: new high speed USB device using ehci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
  Vendor:           Model: USB DISK 20X      Rev: PMAP
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 2015232 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1
sd 5:0:0:0: Attached scsi removable disk sdb
sd 5:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
  Vendor:           Model: USB DISK 2.0      Rev: PMAP
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sdc: 4030464 512-byte hdwr sectors (2064 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 4030464 512-byte hdwr sectors (2064 MB)
sdc: Write Protect is off
sdc: Mode Sense: 23 00 00 00
sdc: assuming drive cache: write through
 sdc: sdc1
sd 6:0:0:0: Attached scsi removable disk sdc
sd 6:0:0:0: Attached scsi generic sg4 type 0
usb-storage: device scan complete
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
lspci:
Code:
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
01:06.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
05:00.0 VGA compatible controller: nVidia Corporation Unknown device 0404 (rev a1)
Code:
lugo@debian:~$ scantv -n pal -f europe-west
[global]
freqtab = europe-west

[defaults]
input = Television
norm = PAL

device has no tuner, exiting
lugo@debian:~$
Code:
lugo@debian:~$ v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
X Error of failed request:  XF86DGANoDirectVideoMode
  Major opcode of failed request:  136 (XFree86-DGA)
  Minor opcode of failed request:  1 (XF86DGAGetVideoLL)
  Serial number of failed request:  13
  Current serial number in output stream:  13
lugo@debian:~$ 
Same as root.