Results 1 to 1 of 1
Enjoy an ad free experience by logging in. Not a member yet? Register.
- Join Date
- Sep 2004
Seeking advice on jumper connection
Asus System M2N-E Specifications - Motherboard
ATA-133, Serial ATA-300 (RAID)
Seagate SATA II 640G Cache 32M ST3640323AS-501
Seagate Technology - Barracuda 7200.11 SATA 3Gb/s 640-GB Hard Drive
$ sudo lshw | grep sataCode:
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 module=sata_nv configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 module=sata_nv configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3 module=sata_nv
Just bought the captioned HD, factory setting on jumpers:-
Limited to 1.5Gb/s Operation - the 2 jumpers on the right are connected with a bridge-connector.
According to the instruction on the label:-
3 Gb/s Operation - the 4 jumpers should be free standing without connection.
The captioned motherboard can suppor Serial ATA-300. Please advise whether I have to remove the bridge connector. TIA