Bootable USB Hardrive Formatting Help

**Huntsman191** · 12-12-2008

I have a 500GB External USB Hard drive that i used to boot Fedora 8 onto my laptop running windows. Recently, i installed Ubuntu onto the same laptop so have no use for Fedora 8 however i wish to make the 500GB USB Hard Drive a backup for my families windows computers and my linux computer. When i plug in the Hard drive it recognizes it but is unable to mount it. Im pretty sure this is because it was made to be bootable.

How can i fix this and format the drive to be recognizable by windows and linux? FAT32?

Thank you...

**devils casper** · 12-12-2008

It doesn't matter if Disk is bootable or not. Both OSes should mount its partitions without any problem.

Plug in disk, boot up Fedora and execute this

Code:

su -
/sbin/fdisk -l

Post the output here.

**Huntsman191** · 12-12-2008

I open my BIOS, select USB Hard Drive and it begins to open grub but it boots into Ubuntu. When i enter the Grub menu i get various versions of ubuntu eg. recovery mode, older kernel version etc but no Fedora.

How else can i get fix my problem?

Ubuntu recognises the drive however it says "Unable to mount location - Unable to mount file".

When i load the drive in gparted (i can only do it in the terminal) it states it is unnalocated but when i try to create a new partition it goes "error creating new partition table".

Ive tried mkdosfs and mkfs and fdisk, none of them will successfully format the drive.

mkfs.ext3 /dev/sdb said it formatted the drive, with some errors "Unable to read/write ease/read sector 0" but i can still cannot mount the drive.

**Huntsman191** · 12-12-2008

Here are the outputs of some system commands. Dont know if they'l help.

dmesg:

Code:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-7-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:20 UTC 2008 (Ubuntu 2.6.27-7.16-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
[    0.000000]  BIOS-e820: 000000003fe80000 - 000000003fe93000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fe93000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x3fe80 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[    0.000000] RAMDISK: 3781d000 - 37fef30c
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F6530, 0014 (r0 PTLTD )
[    0.000000] ACPI: RSDT 3FE8BF28, 0044 (r1 PTLTD  Capell00  6040000  LTP        0)
[    0.000000] ACPI: FACP 3FE92E20, 0074 (r1 HP     NISSAN    6040000 LOHR       5A)
[    0.000000] ACPI: DSDT 3FE8CB40, 62E0 (r1 HP     NISSAN    6040000 INTL 20050228)
[    0.000000] ACPI: FACS 3FE93FC0, 0040
[    0.000000] ACPI: APIC 3FE92E94, 0068 (r1 HP     NISSAN    6040000 LOHR       5A)
[    0.000000] ACPI: HPET 3FE92EFC, 0038 (r1 HP     NISSAN    6040000 LOHR       5A)
[    0.000000] ACPI: MCFG 3FE92F34, 003C (r1 HP     NISSAN    6040000 LOHR       5A)
[    0.000000] ACPI: APIC 3FE92F70, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 3FE92FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: SSDT 3FE8C936, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
[    0.000000] ACPI: SSDT 3FE8BF6C, 04F6 (r1  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] 126MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00008000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[    0.000000]   #4 [003781d000 - 0037fef30c]          RAMDISK ==> [003781d000 - 0037fef30c]
[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[    0.000000]   #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f65e0] 000f65e0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x0003fe80
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fe80
[    0.000000] On node 0 totalpages: 261663
[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 32099 pages, LIFO batch:7
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259362
[    0.000000] Kernel command line: root=UUID=2d067b8f-37d8-4c4c-a82f-29d526840d52 ro quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 1994.964 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 1023284k/1047040k available (2572k kernel code, 23036k reserved, 1160k data, 424k init, 129536k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
[    0.004000]       .data : 0xc03832aa - 0xc04a5680   (1160 kB)
[    0.004000]       .text : 0xc0100000 - 0xc03832aa   (2572 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.92 BogoMIPS (lpj=7979856)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.020008] ACPI: Core revision 20080609
[    0.023152] ACPI: Checking initramfs for custom DSDT
[    0.712313] ENABLING IO-APIC IRQs
[    0.712541] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.755662] CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[    0.756031] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3990.16 BogoMIPS (lpj=7980333)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.840816] CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
[    0.840851] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.844062] Brought up 2 CPUs
[    0.844068] Total of 2 processors activated (7980.09 BogoMIPS).
[    0.844106] CPU0 attaching sched-domain:
[    0.844111]  domain 0: span 0-1 level MC
[    0.844117]   groups: 0 1
[    0.844129] CPU1 attaching sched-domain:
[    0.844133]  domain 0: span 0-1 level MC
[    0.844138]   groups: 1 0
[    0.844278] net_namespace: 840 bytes
[    0.844278] Booting paravirtualized kernel on bare hardware
[    0.844546] Time: 17:57:25  Date: 12/12/08
[    0.844595] NET: Registered protocol family 16
[    0.844631] EISA bus registered
[    0.844631] ACPI: bus type pci registered
[    0.844631] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.844631] PCI: MCFG area at e0000000 reserved in E820
[    0.844631] PCI: Using MMCONFIG for extended config space
[    0.844631] PCI: Using configuration type 1 for base access
[    0.849807] ACPI: EC: Look up EC in DSDT
[    0.856601] ACPI: BIOS _OSI(Linux) query ignored via DMI
[    0.857706] ACPI: Interpreter enabled
[    0.857712] ACPI: (supports S0 S3 S4 S5)
[    0.857743] ACPI: Using IOAPIC for interrupt routing
[    0.864060] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.948283] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.948289] ACPI: EC: driver started in interrupt mode
[    0.948339] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.948339] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.948339] pci 0000:00:01.0: PME# disabled
[    0.948339] PCI: 0000:00:1b.0 reg 10 64bit mmio: [d2400000, d2403fff]
[    0.948345] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.948354] pci 0000:00:1b.0: PME# disabled
[    0.948446] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.948454] pci 0000:00:1c.0: PME# disabled
[    0.948545] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.948553] pci 0000:00:1c.1: PME# disabled
[    0.948645] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.948653] pci 0000:00:1c.2: PME# disabled
[    0.948721] PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f]
[    0.948803] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f]
[    0.948885] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f]
[    0.948968] PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f]
[    0.949061] PCI: 0000:00:1d.7 reg 10 32bit mmio: [d2404000, d24043ff]
[    0.949134] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.949143] pci 0000:00:1d.7: PME# disabled
[    0.949341] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.949349] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.949389] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[    0.949401] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[    0.949413] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[    0.949425] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[    0.949438] PCI: 0000:00:1f.1 reg 20 io port: [1880, 188f]
[    0.949520] PCI: 0000:00:1f.2 reg 10 io port: [18c8, 18cf]
[    0.949532] PCI: 0000:00:1f.2 reg 14 io port: [18ac, 18af]
[    0.949544] PCI: 0000:00:1f.2 reg 18 io port: [18c0, 18c7]
[    0.949556] PCI: 0000:00:1f.2 reg 1c io port: [18a8, 18ab]
[    0.949568] PCI: 0000:00:1f.2 reg 20 io port: [18b0, 18bf]
[    0.949580] PCI: 0000:00:1f.2 reg 24 32bit mmio: [d2404400, d24047ff]
[    0.949620] pci 0000:00:1f.2: PME# supported from D3hot
[    0.949628] pci 0000:00:1f.2: PME# disabled
[    0.949699] PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff]
[    0.949781] PCI: 0000:01:00.0 reg 10 32bit mmio: [d1000000, d1ffffff]
[    0.949791] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff]
[    0.949812] PCI: 0000:01:00.0 reg 1c 64bit mmio: [d0000000, d0ffffff]
[    0.949827] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
[    0.949913] PCI: bridge 0000:00:01.0 32bit mmio: [d0000000, d1ffffff]
[    0.949923] PCI: bridge 0000:00:01.0 64bit mmio pref: [c0000000, cfffffff]
[    0.950001] PCI: bridge 0000:00:1c.0 io port: [0, fff]
[    0.950009] PCI: bridge 0000:00:1c.0 32bit mmio: [0, fffff]
[    0.950093] PCI: bridge 0000:00:1c.1 io port: [0, fff]
[    0.950102] PCI: bridge 0000:00:1c.1 32bit mmio: [0, fffff]
[    0.950311] PCI: 0000:06:00.0 reg 10 32bit mmio: [d2100000, d2100fff]
[    0.950539] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[    0.950555] pci 0000:06:00.0: PME# disabled
[    0.950621] PCI: bridge 0000:00:1c.2 io port: [0, fff]
[    0.950630] PCI: bridge 0000:00:1c.2 32bit mmio: [0, fffff]
[    0.950711] PCI: 0000:08:06.0 reg 10 32bit mmio: [d2004000, d2004fff]
[    0.950739] pci 0000:08:06.0: supports D1
[    0.950742] pci 0000:08:06.0: supports D2
[    0.950747] pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.950756] pci 0000:08:06.0: PME# disabled
[    0.950808] PCI: 0000:08:06.1 reg 10 32bit mmio: [d2007000, d20077ff]
[    0.950823] PCI: 0000:08:06.1 reg 14 32bit mmio: [d2000000, d2003fff]
[    0.950893] pci 0000:08:06.1: supports D1
[    0.950897] pci 0000:08:06.1: supports D2
[    0.950902] pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot
[    0.950911] pci 0000:08:06.1: PME# disabled
[    0.950959] PCI: 0000:08:06.2 reg 10 32bit mmio: [d2005000, d2005fff]
[    0.951031] pci 0000:08:06.2: supports D1
[    0.951035] pci 0000:08:06.2: supports D2
[    0.951039] pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot
[    0.951048] pci 0000:08:06.2: PME# disabled
[    0.952036] PCI: 0000:08:06.3 reg 10 32bit mmio: [d2007800, d20078ff]
[    0.952108] pci 0000:08:06.3: supports D1
[    0.952112] pci 0000:08:06.3: supports D2
[    0.952116] pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot
[    0.952125] pci 0000:08:06.3: PME# disabled
[    0.952182] PCI: 0000:08:08.0 reg 10 32bit mmio: [d2006000, d2006fff]
[    0.952195] PCI: 0000:08:08.0 reg 14 io port: [2000, 203f]
[    0.952255] pci 0000:08:08.0: supports D1
[    0.952259] pci 0000:08:08.0: supports D2
[    0.952264] pci 0000:08:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.952272] pci 0000:08:08.0: PME# disabled
[    0.952322] pci 0000:00:1e.0: transparent bridge
[    0.952330] PCI: bridge 0000:00:1e.0 io port: [2000, 2fff]
[    0.952339] PCI: bridge 0000:00:1e.0 32bit mmio: [d2000000, d20fffff]
[    0.952414] bus 00 -> node 0
[    0.952428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.953194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.953502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.953801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.954098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.954424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.960378] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.960451] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[    0.960675] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[    0.960899] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.961124] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[    0.961348] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.961573] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.964058] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.964300] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.964325] pnp: PnP ACPI init
[    0.964325] ACPI: bus type pnp registered
[    0.988420] pnp 00:06: io resource (0x2e-0x2f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x61-0x61) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x67-0x67) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x70-0x70) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x92-0x92) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0xb2-0xb3) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x800-0x80f) overlaps 0000:00:1c.0 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x2e-0x2f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x61-0x61) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x67-0x67) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x70-0x70) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x92-0x92) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0xb2-0xb3) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x800-0x80f) overlaps 0000:00:1c.1 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x2e-0x2f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x61-0x61) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x63-0x63) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x65-0x65) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x67-0x67) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x70-0x70) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x80-0x80) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x92-0x92) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0xb2-0xb3) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988420] pnp 00:06: io resource (0x800-0x80f) overlaps 0000:00:1c.2 BAR 7 (0x0-0xfff), disabling
[    0.988422] pnp: PnP ACPI: found 10 devices
[    0.988422] ACPI: ACPI bus type pnp unregistered
[    0.988422] PnPBIOS: Disabled by ACPI PNP
[    0.988422] PCI: Using ACPI for IRQ routing
[    0.988422] pci 0000:00:1c.0: BAR 7: can't allocate resource
[    0.988422] pci 0000:00:1c.0: BAR 8: can't allocate resource
[    0.988422] pci 0000:00:1c.1: BAR 7: can't allocate resource
[    0.988422] pci 0000:00:1c.1: BAR 8: can't allocate resource
[    0.988422] pci 0000:00:1c.2: BAR 7: can't allocate resource
[    0.988422] pci 0000:00:1c.2: BAR 8: can't allocate resource
[    0.988422] pci 0000:06:00.0: BAR 0: can't allocate resource
[    0.996049] NET: Registered protocol family 8
[    0.996054] NET: Registered protocol family 20
[    0.996086] NetLabel: Initializing
[    0.996086] NetLabel:  domain hash size = 128
[    0.996086] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.996108] NetLabel:  unlabeled traffic allowed by default
[    0.996120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.996130] hpet0: 3 64-bit timers, 14318180 Hz
[    0.998206] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.998212]    actual entries 65620
[    0.998346] AppArmor: AppArmor Filesystem Enabled
[    0.998385] ACPI: RTC can wake from S4
[    1.000051] Switched to high resolution mode on CPU 0
[    1.000881] Switched to high resolution mode on CPU 1
[    1.004042] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[    1.004049] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[    1.004056] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[    1.004063] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[    1.004070] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    1.004076] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[    1.004083] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[    1.004090] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[    1.004106] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[    1.004121] system 00:06: ioport range 0x1000-0x107f has been reserved
[    1.004127] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    1.004133] system 00:06: ioport range 0x1640-0x164f has been reserved
[    1.040016] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[    1.040024] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    1.040029] pci 0000:00:01.0:   IO window: disabled
[    1.040037] pci 0000:00:01.0:   MEM window: 0xd0000000-0xd1ffffff
[    1.040044] pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    1.040054] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    1.040059] pci 0000:00:1c.0:   IO window: disabled
[    1.040068] pci 0000:00:1c.0:   MEM window: disabled
[    1.040076] pci 0000:00:1c.0:   PREFETCH window: disabled
[    1.040088] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    1.040093] pci 0000:00:1c.1:   IO window: disabled
[    1.040103] pci 0000:00:1c.1:   MEM window: disabled
[    1.040110] pci 0000:00:1c.1:   PREFETCH window: disabled
[    1.040176] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[    1.040180] pci 0000:00:1c.2:   IO window: disabled
[    1.040191] pci 0000:00:1c.2:   MEM window: 0x54000000-0x540fffff
[    1.040199] pci 0000:00:1c.2:   PREFETCH window: disabled
[    1.040216] pci 0000:08:06.0: CardBus bridge, secondary bus 0000:09
[    1.040221] pci 0000:08:06.0:   IO window: 0x002400-0x0024ff
[    1.040231] pci 0000:08:06.0:   IO window: 0x002800-0x0028ff
[    1.040239] pci 0000:08:06.0:   PREFETCH window: 0x50000000-0x53ffffff
[    1.040249] pci 0000:08:06.0:   MEM window: 0x58000000-0x5bffffff
[    1.040258] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[    1.040265] pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
[    1.040275] pci 0000:00:1e.0:   MEM window: 0xd2000000-0xd20fffff
[    1.040284] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
[    1.040309] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.040317] pci 0000:00:01.0: setting latency timer to 64
[    1.040332] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.040343] pci 0000:00:1c.0: setting latency timer to 64
[    1.040357] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.040368] pci 0000:00:1c.1: setting latency timer to 64
[    1.040381] pci 0000:00:1c.2: enabling device (0100 -> 0102)
[    1.040390] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.040401] pci 0000:00:1c.2: setting latency timer to 64
[    1.040411] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[    1.040422] pci 0000:00:1e.0: setting latency timer to 64
[    1.040436] pci 0000:08:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.040447] bus: 00 index 0 io port: [0, ffff]
[    1.040452] bus: 00 index 1 mmio: [0, ffffffff]
[    1.040457] bus: 01 index 0 mmio: [0, 0]
[    1.040461] bus: 01 index 1 mmio: [d0000000, d1ffffff]
[    1.040466] bus: 01 index 2 mmio: [c0000000, cfffffff]
[    1.040471] bus: 01 index 3 mmio: [0, 0]
[    1.040475] bus: 02 index 0 mmio: [0, fff]
[    1.040480] bus: 02 index 1 mmio: [0, fffff]
[    1.040484] bus: 02 index 2 mmio: [0, 0]
[    1.040488] bus: 02 index 3 mmio: [0, 0]
[    1.040492] bus: 03 index 0 mmio: [0, fff]
[    1.040497] bus: 03 index 1 mmio: [0, fffff]
[    1.040501] bus: 03 index 2 mmio: [0, 0]
[    1.040505] bus: 03 index 3 mmio: [0, 0]
[    1.040509] bus: 06 index 0 mmio: [0, fff]
[    1.040514] bus: 06 index 1 mmio: [54000000, 540fffff]
[    1.040518] bus: 06 index 2 mmio: [0, 0]
[    1.040523] bus: 06 index 3 mmio: [0, 0]
[    1.040527] bus: 08 index 0 io port: [2000, 2fff]
[    1.040532] bus: 08 index 1 mmio: [d2000000, d20fffff]
[    1.040537] bus: 08 index 2 mmio: [50000000, 53ffffff]
[    1.040542] bus: 08 index 3 io port: [0, ffff]
[    1.040546] bus: 08 index 4 mmio: [0, ffffffff]
[    1.040551] bus: 09 index 0 io port: [2400, 24ff]
[    1.040556] bus: 09 index 1 io port: [2800, 28ff]
[    1.040560] bus: 09 index 2 mmio: [50000000, 53ffffff]
[    1.040565] bus: 09 index 3 mmio: [58000000, 5bffffff]
[    1.040582] NET: Registered protocol family 2
[    1.052098] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.052529] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.053256] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    1.053617] TCP: Hash tables configured (established 131072 bind 65536)
[    1.053624] TCP reno registered
[    1.060141] NET: Registered protocol family 1
[    1.060348] checking if image is initramfs... it is
[    2.460583] Freeing initrd memory: 8008k freed
[    2.461102] Simple Boot Flag at 0x36 set to 0x1
[    2.462740] audit: initializing netlink socket (disabled)
[    2.462775] type=2000 audit(1229104646.460:1): initialized
[    2.475179] highmem bounce pool size: 64 pages
[    2.475191] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.480377] VFS: Disk quotas dquot_6.5.1
[    2.480559] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.480762] msgmni has been set to 1761
[    2.481023] io scheduler noop registered
[    2.481029] io scheduler anticipatory registered
[    2.481035] io scheduler deadline registered
[    2.481059] io scheduler cfq registered (default)
[   10.480016] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   10.480178] pci 0000:01:00.0: Boot video device
[   10.480211] pci 0000:08:08.0: Firmware left e100 interrupts enabled; disabling
[   10.480438] pcieport-driver 0000:00:01.0: setting latency timer to 64
[   10.480497] pcieport-driver 0000:00:01.0: found MSI capability
[   10.480547] pci_express 0000:00:01.0:pcie00: allocate port service
[   10.480642] pci_express 0000:00:01.0:pcie03: allocate port service
[   10.480803] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[   10.480867] pcieport-driver 0000:00:1c.0: found MSI capability
[   10.480930] pci_express 0000:00:1c.0:pcie00: allocate port service
[   10.481036] pci_express 0000:00:1c.0:pcie02: allocate port service
[   10.481130] pci_express 0000:00:1c.0:pcie03: allocate port service
[   10.481312] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[   10.481376] pcieport-driver 0000:00:1c.1: found MSI capability
[   10.481438] pci_express 0000:00:1c.1:pcie00: allocate port service
[   10.481528] pci_express 0000:00:1c.1:pcie02: allocate port service
[   10.481619] pci_express 0000:00:1c.1:pcie03: allocate port service
[   10.481800] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[   10.481864] pcieport-driver 0000:00:1c.2: found MSI capability
[   10.481927] pci_express 0000:00:1c.2:pcie00: allocate port service
[   10.482017] pci_express 0000:00:1c.2:pcie02: allocate port service
[   10.482108] pci_express 0000:00:1c.2:pcie03: allocate port service
[   10.482811] isapnp: Scanning for PnP cards...
[   10.837531] isapnp: No Plug & Play device found
[   10.913435] hpet_resources: 0xfed00000 is busy
[   10.913566] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   10.918421] brd: module loaded
[   10.918574] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   10.918826] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   10.939982] i8042.c: Detected active multiplexing controller, rev 1.1.
[   10.955811] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.955823] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   10.955829] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   10.955835] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   10.955841] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   10.960244] mice: PS/2 mouse device common for all mice
[   10.960517] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[   10.960557] rtc0: alarms up to one month, y3k, hpet irqs
[   10.960821] EISA: Probing bus 0 at eisa.0
[   10.960832] Cannot allocate resource for EISA slot 1
[   10.960838] Cannot allocate resource for EISA slot 2
[   10.960875] EISA: Detected 0 cards.
[   10.960881] cpuidle: using governor ladder
[   10.960886] cpuidle: using governor menu
[   10.961902] TCP cubic registered
[   10.961949] Using IPI No-Shortcut mode
[   10.962316] registered taskstats version 1
[   10.962535]   Magic number: 4:185:997
[   10.962552] tty ttyad: hash matches
[   10.962686] rtc_cmos 00:09: setting system clock to 2008-12-12 17:57:35 UTC (1229104655)
[   10.962693] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.962698] EDD information not available.
[   10.963038] Freeing unused kernel memory: 424k freed
[   10.963133] Write protecting the kernel text: 2576k
[   10.963190] Write protecting the kernel read-only data: 936k
[   10.980837] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   11.261241] fuse init (API version 7.9)
[   11.337961] ACPI: SSDT 3FE8C6C3, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[   11.338664] ACPI: SSDT 3FE8C462, 01DC (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[   11.412467] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   11.412589] processor ACPI0007:00: registered as cooling_device0
[   11.412598] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.413295] ACPI: SSDT 3FE8C8AD, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[   11.413964] ACPI: SSDT 3FE8C63E, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[   11.415190] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.415289] processor ACPI0007:01: registered as cooling_device1
[   11.415298] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.415509] Marking TSC unstable due to TSC halts in idle
[   11.430636] thermal LNXTHERM:01: registered as thermal_zone0
[   11.447011] ACPI: Thermal Zone [TZ01] (59 C)
[   11.447466] thermal LNXTHERM:02: registered as thermal_zone1
[   11.447792] ACPI: Thermal Zone [TZ02] (27 C)
[   12.182913] usbcore: registered new interface driver usbfs
[   12.182955] usbcore: registered new interface driver hub
[   12.183071] usbcore: registered new device driver usb
[   12.183370] No dock devices found.
[   12.233761] SCSI subsystem initialized
[   12.307524] libata version 3.00 loaded.
[   12.376980] pata_acpi 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   12.377067] pata_acpi 0000:00:1f.1: setting latency timer to 64
[   12.377091] pata_acpi 0000:00:1f.1: PCI INT B disabled
[   12.385319] ata_piix 0000:00:1f.1: version 2.12
[   12.385335] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   12.385395] ata_piix 0000:00:1f.1: setting latency timer to 64
[   12.390011] scsi0 : ata_piix
[   12.390232] scsi1 : ata_piix
[   12.391349] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[   12.391356] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[   12.391684] USB Universal Host Controller Interface driver v3.0
[   12.397024] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[   12.397030] e100: Copyright(c) 1999-2006 Intel Corporation
[   12.553574] ata1.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HQ04, max MWDMA2
[   12.569473] ata1.00: configured for MWDMA2
[   12.569554] ata2: port disabled. ignoring.
[   12.574001] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N HQ04 PQ: 0 ANSI: 5
[   12.575043] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   12.575058] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   12.575066] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.575141] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   12.575190] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[   12.575461] usb usb1: configuration #1 chosen from 1 choice
[   12.575523] hub 1-0:1.0: USB hub found
[   12.575536] hub 1-0:1.0: 2 ports detected
[   12.781497] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   12.781514] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   12.781521] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.781570] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   12.781620] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[   12.781801] usb usb2: configuration #1 chosen from 1 choice
[   12.781855] hub 2-0:1.0: USB hub found
[   12.781867] hub 2-0:1.0: 2 ports detected
[   12.867644] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[   12.886144] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   12.886159] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   12.886167] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.886229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   12.886280] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[   12.886462] usb usb3: configuration #1 chosen from 1 choice
[   12.886522] hub 3-0:1.0: USB hub found
[   12.886535] hub 3-0:1.0: 2 ports detected
[   12.893048] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   12.894162] Driver 'sr' needs updating - please use bus_type methods
[   12.897857] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   12.897864] Uniform CD-ROM driver Revision: 3.20
[   12.898020] sr 0:0:0:0: Attached scsi CD-ROM sr0
[   12.988486] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[   12.988503] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   12.988510] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   12.988561] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   12.988612] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[   12.988792] usb usb4: configuration #1 chosen from 1 choice
[   12.988849] hub 4-0:1.0: USB hub found
[   12.988862] hub 4-0:1.0: 2 ports detected
[   13.055467] usb 1-1: configuration #1 chosen from 1 choice
[   13.196452] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   13.196475] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   13.196482] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   13.196533] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   13.200456] ehci_hcd 0000:00:1d.7: debug port 1
[   13.200468] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   13.200481] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000
[   13.216060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   13.216240] usb usb5: configuration #1 chosen from 1 choice
[   13.216296] hub 5-0:1.0: USB hub found
[   13.216310] hub 5-0:1.0: 8 ports detected
[   13.332090] usb 1-1: USB disconnect, address 2
[   13.424500] ahci 0000:00:1f.2: version 3.0
[   13.424524] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   13.424672] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[   13.424680] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[   13.424690] ahci 0000:00:1f.2: setting latency timer to 64
[   13.424909] scsi2 : ahci
[   13.426241] scsi3 : ahci
[   13.427041] scsi4 : ahci
[   13.427875] scsi5 : ahci
[   13.428125] ata3: SATA max UDMA/133 abar m1024@0xd2404400 port 0xd2404500 irq 219
[   13.428131] ata4: DUMMY
[   13.428137] ata5: SATA max UDMA/133 abar m1024@0xd2404400 port 0xd2404600 irq 219
[   13.428142] ata6: DUMMY
[   13.572070] usb 5-1: new high speed USB device using ehci_hcd and address 2
[   13.706111] usb 5-1: configuration #1 chosen from 1 choice
[   13.748105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   13.748894] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[   13.748905] ata3.00: ATA-7: FUJITSU MHV2100BH, 892C, max UDMA/100
[   13.748911] ata3.00: 195371568 sectors, multi 16: LBA48 
[   13.751666] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[   13.751691] ata3.00: configured for UDMA/100
[   14.060069] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   14.084063] ata5: SATA link down (SStatus 0 SControl 300)
[   14.100357] scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHV2100B 892C PQ: 0 ANSI: 5
[   14.100641] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[   14.101285] e100 0000:08:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   14.101358] e100 0000:08:08.0: setting latency timer to 64
[   14.129506] e100 0000:08:08.0: PME# disabled
[   14.130041] e100: eth0: e100_probe: addr 0xd2006000, irq 20, MAC addr 00:16:d4:05:fb:0c
[   14.130131] ohci1394 0000:08:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   14.179947] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[d2007000-d20077ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   14.235911] usb 4-1: configuration #1 chosen from 1 choice
[   14.259522] usbcore: registered new interface driver libusual
[   14.274188] Initializing USB Mass Storage driver...
[   14.275038] scsi6 : SCSI emulation for USB Mass Storage devices
[   14.275657] usbcore: registered new interface driver usb-storage
[   14.275664] USB Mass Storage support registered.
[   14.275855] usb-storage: device found at 2
[   14.275860] usb-storage: waiting for device to settle before scanning
[   14.299231] Driver 'sd' needs updating - please use bus_type methods
[   14.299423] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   14.299462] sd 2:0:0:0: [sda] Write Protect is off
[   14.299468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   14.299532] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.299662] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   14.299698] sd 2:0:0:0: [sda] Write Protect is off
[   14.299704] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   14.299768] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   14.299777]  sda: sda1 sda2 < sda5 >
[   14.415988] sd 2:0:0:0: [sda] Attached SCSI disk
[   14.572990] PM: Starting manual resume from disk
[   14.572997] PM: Resume from partition 8:5
[   14.573001] PM: Checking hibernation image.
[   14.573215] PM: Resume from disk failed.
[   14.658660] kjournald starting.  Commit interval 5 seconds
[   14.658689] EXT3-fs: mounted filesystem with ordered data mode.
[   15.452310] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[643f0200b9174084]
[   19.272340] usb-storage: device scan complete
[   19.283626] scsi 6:0:0:0: Direct-Access     WD       5000AAC External 1.65 PQ: 0 ANSI: 0
[   19.285104] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   19.285838] sd 6:0:0:0: [sdb] Write Protect is off
[   19.285844] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   19.285850] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   19.286594] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   19.287337] sd 6:0:0:0: [sdb] Write Protect is off
[   19.287342] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[   19.287347] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[   19.287354]  sdb:<3>end_request: I/O error, dev sdb, sector 0
[   19.288340] Buffer I/O error on device sdb, logical block 0
[   19.289203] end_request: I/O error, dev sdb, sector 0
[   19.289209] Buffer I/O error on device sdb, logical block 0
[   19.290081] end_request: I/O error, dev sdb, sector 0
[   19.290088] Buffer I/O error on device sdb, logical block 0
[   19.291082] end_request: I/O error, dev sdb, sector 0
[   19.291088] Buffer I/O error on device sdb, logical block 0
[   19.291957] end_request: I/O error, dev sdb, sector 0
[   19.291963] Buffer I/O error on device sdb, logical block 0
[   19.291984] ldm_validate_partition_table(): Disk read failed.
[   19.292956] end_request: I/O error, dev sdb, sector 0
[   19.292963] Buffer I/O error on device sdb, logical block 0
[   19.293831] end_request: I/O error, dev sdb, sector 0
[   19.293837] Buffer I/O error on device sdb, logical block 0
[   19.294703] end_request: I/O error, dev sdb, sector 0
[   19.294709] Buffer I/O error on device sdb, logical block 0
[   19.295583] end_request: I/O error, dev sdb, sector 0
[   19.295589] Buffer I/O error on device sdb, logical block 0
[   19.295608] Dev sdb: unable to read RDB block 0
[   19.296457] end_request: I/O error, dev sdb, sector 0
[   19.296463] Buffer I/O error on device sdb, logical block 0
[   19.297326] end_request: I/O error, dev sdb, sector 0
[   19.298207] end_request: I/O error, dev sdb, sector 24
[   19.299082] end_request: I/O error, dev sdb, sector 24
[   19.299953] end_request: I/O error, dev sdb, sector 0
[   19.300832] end_request: I/O error, dev sdb, sector 0
[   19.300851]  unable to read partition table
[   19.300996] sd 6:0:0:0: [sdb] Attached SCSI disk
[   19.301188] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   21.391989] udevd version 124 started
[   22.299313] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   22.322412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.592403] Linux agpgart interface v0.103
[   22.712790] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   22.740039] ACPI: Power Button (FF) [PWRF]
[   22.740091] ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20080609]
[   22.740101] ACPI Warning (evxface-0145): Could not enable fixed event 3 [20080609]
[   22.740295] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[   22.740414] ACPI: Lid Switch [LID]
[   22.740556] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   22.772041] ACPI: Power Button (CM) [PWRB]
[   22.879116] iTCO_vendor_support: vendor-support=0
[   22.942278] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[   22.942490] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   22.942693] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   23.218969] ACPI: WMI: Mapper loaded
[   23.400238] intel_rng: FWH not detected
[   23.790254] Yenta: CardBus bridge found at 0000:08:06.0 [103c:30a5]
[   23.790285] Yenta: Enabling burst memory read transactions
[   23.790294] Yenta: Using INTVAL to route CSC interrupts to PCI
[   23.790299] Yenta: Routing CardBus interrupts to ISA
[   23.790309] Yenta TI: socket 0000:08:06.0, mfunc 0x01aa1b22, devctl 0x64
[   24.020872] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[   24.020880] Socket status: 30000006
[   24.020886] Yenta: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[   24.020897] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[   24.020903] cs: IO port probe 0x2000-0x2fff: clean.
[   24.021379] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[   24.021386] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   24.035796] tifm_7xx1 0000:08:06.2: enabling device (0000 -> 0002)
[   24.035815] tifm_7xx1 0000:08:06.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   24.037737] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5
[   24.057234] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   24.057659] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6
[   24.092044] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   24.178533] ACPI: Battery Slot [BAT1] (battery present)
[   24.360524] nvidia: module license 'NVIDIA' taints kernel.
[   24.808225] ACPI: AC Adapter [ACAD] (on-line)
[   24.911130] Bluetooth: Core ver 2.13
[   24.932576] NET: Registered protocol family 31
[   24.932582] Bluetooth: HCI device and connection manager initialized
[   24.932589] Bluetooth: HCI socket layer initialized
[   24.988450] sdhci: Secure Digital Host Controller Interface driver
[   24.988458] sdhci: Copyright(c) Pierre Ossman
[   25.081359] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   25.081375] nvidia 0000:01:00.0: setting latency timer to 64
[   25.081576] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.80  Wed Oct  1 14:38:10 PDT 2008
[   25.115219] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   25.115396] usbcore: registered new interface driver btusb
[   25.181544] sdhci-pci 0000:08:06.3: SDHCI controller found [104c:803c] (rev 0)
[   25.181565] sdhci-pci 0000:08:06.3: enabling device (0000 -> 0002)
[   25.181578] sdhci-pci 0000:08:06.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[   25.181693] mmc0: SDHCI controller on PCI [0000:08:06.3] using PIO
[   25.233633] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   25.431743] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[   25.431751] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[   25.431890] iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   25.431909] iwl3945 0000:06:00.0: setting latency timer to 64
[   25.431937] iwl3945: Detected Intel Wireless WiFi Link 3945BG
[   25.497181] iwl3945: Tunable channels: 13 802.11bg, 0 802.11a channels
[   25.502011] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   25.768855] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   25.768889] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   25.961203] end_request: I/O error, dev sdb, sector 0
[   25.961213] __ratelimit: 5 callbacks suppressed
[   25.961219] Buffer I/O error on device sdb, logical block 0
[   25.961232] Buffer I/O error on device sdb, logical block 1
[   25.961239] Buffer I/O error on device sdb, logical block 2
[   25.961245] Buffer I/O error on device sdb, logical block 3
[   25.962446] end_request: I/O error, dev sdb, sector 0
[   25.962453] Buffer I/O error on device sdb, logical block 0
[   26.188429] iwl3945 0000:06:00.0: PCI INT A disabled
[   26.303554] end_request: I/O error, dev sr0, sector 0
[   26.303565] Buffer I/O error on device sr0, logical block 0
[   26.303578] Buffer I/O error on device sr0, logical block 1
[   26.303585] Buffer I/O error on device sr0, logical block 2
[   26.303591] Buffer I/O error on device sr0, logical block 3
[   26.306910] end_request: I/O error, dev sr0, sector 0
[   26.306919] Buffer I/O error on device sr0, logical block 0
[   26.345238] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[   26.409359] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[   27.607343] cs: IO port probe 0x100-0x3af: clean.
[   27.609643] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   27.610609] cs: IO port probe 0x820-0x8ff: clean.
[   27.611398] cs: IO port probe 0xc00-0xcf7: clean.
[   27.612494] cs: IO port probe 0xa00-0xaff: clean.
[   28.465562] lp: driver loaded but no devices found
[   28.798683] Adding 3020180k swap on /dev/sda5.  Priority:-1 extents:1 across:3020180k
[   29.381751] EXT3 FS on sda1, internal journal
[   31.101152] __ratelimit: 3 callbacks suppressed
[   31.101159] type=1505 audit(1229104675.895:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4255
[   31.101476] type=1505 audit(1229104675.895:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4255
[   31.333246] ip_tables: (C) 2000-2006 Netfilter Core Team
[   33.564734] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   33.690887] apm: BIOS not found.
[   33.924140] ppdev: user-space parallel port driver
[   36.958964] end_request: I/O error, dev sdb, sector 0
[   36.958981] Buffer I/O error on device sdb, logical block 0
[   36.958992] Buffer I/O error on device sdb, logical block 1
[   36.958999] Buffer I/O error on device sdb, logical block 2
[   36.959005] Buffer I/O error on device sdb, logical block 3
[   36.961336] end_request: I/O error, dev sdb, sector 0
[   36.961348] Buffer I/O error on device sdb, logical block 0
[   37.423217] Bluetooth: L2CAP ver 2.11
[   37.423231] Bluetooth: L2CAP socket layer initialized
[   37.438746] Bluetooth: SCO (Voice Link) ver 0.6
[   37.438758] Bluetooth: SCO socket layer initialized
[   37.482198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.482212] Bluetooth: BNEP filters: protocol multicast
[   37.527558] Bridge firewalling registered
[   37.539103] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   37.543135] Bluetooth: RFCOMM socket layer initialized
[   37.543401] Bluetooth: RFCOMM TTY layer initialized
[   37.543406] Bluetooth: RFCOMM ver 1.10
[   41.707641] iwl3945 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   41.707811] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[   41.708165] firmware: requesting iwlwifi-3945-1.ucode
[   43.416809] Registered led device: iwl-phy0:radio
[   43.416838] Registered led device: iwl-phy0:assoc
[   43.416954] Registered led device: iwl-phy0:RX
[   43.416999] Registered led device: iwl-phy0:TX
[   43.549244] NET: Registered protocol family 17
[   87.215287] CPU0 attaching NULL sched-domain.
[   87.215308] CPU1 attaching NULL sched-domain.
[   87.237107] CPU0 attaching sched-domain:
[   87.237120]  domain 0: span 0-1 level MC
[   87.237126]   groups: 0 1
[   87.237138] CPU1 attaching sched-domain:
[   87.237143]  domain 0: span 0-1 level MC
[   87.237148]   groups: 1 0
[  103.733657] NET: Registered protocol family 10
[  103.734236] lo: Disabled Privacy Extensions
[  103.734943] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  103.735650] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  105.914615] wlan0: authenticate with AP 00:1b:2f:fa:dd:40
[  105.916568] wlan0: authenticated
[  105.916573] wlan0: associate with AP 00:1b:2f:fa:dd:40
[  105.949913] wlan0: RX AssocResp from 00:1b:2f:fa:dd:40 (capab=0x411 status=0 aid=1)
[  105.949924] wlan0: associated
[  105.952143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  116.248036] wlan0: no IPv6 routers present
[  397.732072] ACPI: EC: missing confirmations, switch off interrupt mode.
[  398.254457] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[  398.254488] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node f7418ae0), AE_TIME
[  398.254575] ACPI Exception (battery-0360): AE_TIME, Evaluating _BST [20080609]
[  531.054645] usb 5-1: USB disconnect, address 2
[  550.339605] end_request: I/O error, dev sr0, sector 0
[  550.339622] Buffer I/O error on device sr0, logical block 0
[  550.339636] Buffer I/O error on device sr0, logical block 1
[  550.339642] Buffer I/O error on device sr0, logical block 2
[  550.339648] Buffer I/O error on device sr0, logical block 3
[  550.350489] end_request: I/O error, dev sr0, sector 0
[  550.350506] Buffer I/O error on device sr0, logical block 0
[  581.153075] CE: hpet increasing min_delta_ns to 15000 nsec
[  700.336433] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 1049.378523] compiz.real[5743]: segfault at 20 ip 08055c8c sp bfe137b0 error 4 in compiz.real[8048000+34000]
[ 1079.179758] CPU0 attaching NULL sched-domain.
[ 1079.179771] CPU1 attaching NULL sched-domain.
[ 1079.191643] CPU0 attaching sched-domain:
[ 1079.191652]  domain 0: span 0-1 level MC
[ 1079.191655]   groups: 0 1
[ 1079.191663] CPU1 attaching sched-domain:
[ 1079.191665]  domain 0: span 0-1 level MC
[ 1079.191668]   groups: 1 0
[ 3481.420083] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3481.420106] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 3481.420108]          cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
[ 3481.420111]          res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3481.420120] ata1.00: status: { DRDY }
[ 3481.420165] ata1: soft resetting link
[ 3481.600529] ata1.00: configured for MWDMA2
[ 3481.600555] ata1: EH complete
[ 3481.927204] end_request: I/O error, dev sr0, sector 0
[ 3481.927221] Buffer I/O error on device sr0, logical block 0
[ 3481.927233] Buffer I/O error on device sr0, logical block 1
[ 3481.927240] Buffer I/O error on device sr0, logical block 2
[ 3481.927246] Buffer I/O error on device sr0, logical block 3
[ 3481.931698] end_request: I/O error, dev sr0, sector 0
[ 3481.931710] Buffer I/O error on device sr0, logical block 0
[ 3482.019297] end_request: I/O error, dev sr0, sector 0
[ 3482.019315] Buffer I/O error on device sr0, logical block 0
[ 4774.305298] end_request: I/O error, dev sr0, sector 0
[ 4774.305314] Buffer I/O error on device sr0, logical block 0
[ 4774.305326] Buffer I/O error on device sr0, logical block 1
[ 4774.305337] Buffer I/O error on device sr0, logical block 2
[ 4774.305343] Buffer I/O error on device sr0, logical block 3
[ 4774.308419] end_request: I/O error, dev sr0, sector 0
[ 4774.308428] Buffer I/O error on device sr0, logical block 0
[ 5301.500335] Clocksource tsc unstable (delta = -63867338 ns)
[ 5702.707014] totem-plugin-vi[12383]: segfault at 0 ip b72be2cc sp b541a490 error 4 in libgobject-2.0.so.0.1800.2[b72b0000+3c000]
[ 6134.480132] usb 5-1: new high speed USB device using ehci_hcd and address 4
[ 6134.614250] usb 5-1: configuration #1 chosen from 1 choice
[ 6134.614960] scsi7 : SCSI emulation for USB Mass Storage devices
[ 6134.616510] usb-storage: device found at 4
[ 6134.616523] usb-storage: waiting for device to settle before scanning
[ 6139.616360] usb-storage: device scan complete
[ 6139.617308] scsi 7:0:0:0: Direct-Access     WD       5000AAC External 1.65 PQ: 0 ANSI: 0
[ 6139.620257] sd 7:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 6139.621629] sd 7:0:0:0: [sdb] Write Protect is off
[ 6139.621643] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 6139.621648] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 6139.623254] sd 7:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 6139.624381] sd 7:0:0:0: [sdb] Write Protect is off
[ 6139.624393] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 6139.624398] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 6139.625252]  sdb:<3>end_request: I/O error, dev sdb, sector 0
[ 6139.626363] Buffer I/O error on device sdb, logical block 0
[ 6139.629724] end_request: I/O error, dev sdb, sector 0
[ 6139.629735] Buffer I/O error on device sdb, logical block 0
[ 6139.633352] end_request: I/O error, dev sdb, sector 0
[ 6139.633363] Buffer I/O error on device sdb, logical block 0
[ 6139.636974] end_request: I/O error, dev sdb, sector 0
[ 6139.636984] Buffer I/O error on device sdb, logical block 0
[ 6139.640599] end_request: I/O error, dev sdb, sector 0
[ 6139.640609] Buffer I/O error on device sdb, logical block 0
[ 6139.643315] ldm_validate_partition_table(): Disk read failed.
[ 6139.644226] end_request: I/O error, dev sdb, sector 0
[ 6139.644235] Buffer I/O error on device sdb, logical block 0
[ 6139.645100] end_request: I/O error, dev sdb, sector 0
[ 6139.645107] Buffer I/O error on device sdb, logical block 0
[ 6139.645973] end_request: I/O error, dev sdb, sector 0
[ 6139.645979] Buffer I/O error on device sdb, logical block 0
[ 6139.646849] end_request: I/O error, dev sdb, sector 0
[ 6139.646856] Buffer I/O error on device sdb, logical block 0
[ 6139.648304] Dev sdb: unable to read RDB block 0
[ 6139.649226] end_request: I/O error, dev sdb, sector 0
[ 6139.650100] end_request: I/O error, dev sdb, sector 0
[ 6139.650973] end_request: I/O error, dev sdb, sector 24
[ 6139.651975] end_request: I/O error, dev sdb, sector 24
[ 6139.652977] end_request: I/O error, dev sdb, sector 0
[ 6139.655843] end_request: I/O error, dev sdb, sector 0
[ 6139.666870]  unable to read partition table
[ 6139.667049] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 6139.667266] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 6139.794982] end_request: I/O error, dev sdb, sector 0
[ 6139.795978] end_request: I/O error, dev sdb, sector 0
[ 6139.923619] end_request: I/O error, dev sdb, sector 0
[ 6139.924612] end_request: I/O error, dev sdb, sector 0
[ 6486.934795] end_request: I/O error, dev sdb, sector 0
[ 6486.934809] __ratelimit: 16 callbacks suppressed
[ 6486.934815] Buffer I/O error on device sdb, logical block 0
[ 6486.934828] Buffer I/O error on device sdb, logical block 1
[ 6486.934839] Buffer I/O error on device sdb, logical block 2
[ 6486.934845] Buffer I/O error on device sdb, logical block 3
[ 6486.935775] end_request: I/O error, dev sdb, sector 0
[ 6486.935781] Buffer I/O error on device sdb, logical block 0
[ 6486.936908] end_request: I/O error, dev sdb, sector 976773160
[ 6486.936915] Buffer I/O error on device sdb, logical block 122096645
[ 6486.937900] end_request: I/O error, dev sdb, sector 976773160
[ 6486.937911] Buffer I/O error on device sdb, logical block 122096645
[ 6486.938899] end_request: I/O error, dev sdb, sector 0
[ 6486.938906] Buffer I/O error on device sdb, logical block 0
[ 6486.939774] end_request: I/O error, dev sdb, sector 8
[ 6486.939783] Buffer I/O error on device sdb, logical block 1
[ 6486.939790] Buffer I/O error on device sdb, logical block 2
[ 6486.940648] end_request: I/O error, dev sdb, sector 0
[ 6635.350561] end_request: I/O error, dev sdb, sector 0
[ 6635.350576] __ratelimit: 2 callbacks suppressed
[ 6635.350582] Buffer I/O error on device sdb, logical block 0
[ 6635.350597] Buffer I/O error on device sdb, logical block 1
[ 6635.350604] Buffer I/O error on device sdb, logical block 2
[ 6635.350611] Buffer I/O error on device sdb, logical block 3
[ 6635.351543] end_request: I/O error, dev sdb, sector 0
[ 6635.351549] Buffer I/O error on device sdb, logical block 0
[ 6635.352676] end_request: I/O error, dev sdb, sector 976773160
[ 6635.352684] Buffer I/O error on device sdb, logical block 122096645
[ 6635.353668] end_request: I/O error, dev sdb, sector 976773160
[ 6635.353678] Buffer I/O error on device sdb, logical block 122096645
[ 6635.354667] end_request: I/O error, dev sdb, sector 0
[ 6635.354674] Buffer I/O error on device sdb, logical block 0
[ 6635.355541] end_request: I/O error, dev sdb, sector 8
[ 6635.355547] Buffer I/O error on device sdb, logical block 1
[ 6635.355557] Buffer I/O error on device sdb, logical block 2
[ 6635.356417] end_request: I/O error, dev sdb, sector 0

lsusb:

Code:

Bus 005 Device 004: ID 1058:1100 Western Digital Technologies, Inc. 
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ls dev/sd*:

Code:

/dev/sda
/dev/sda1
/dev/sda2
/dev/sda5
/dev/sdb

tail -f /var/log/messages:

Code:

Dec 12 23:39:44 remy-laptop kernel: [ 6139.621629] sd 7:0:0:0: [sdb] Write Protect is off
Dec 12 23:39:44 remy-laptop kernel: [ 6139.623254] sd 7:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Dec 12 23:39:44 remy-laptop kernel: [ 6139.624381] sd 7:0:0:0: [sdb] Write Protect is off
Dec 12 23:39:44 remy-laptop kernel: [ 6139.625252]  sdb:<3>end_request: I/O error, dev sdb, sector 0
Dec 12 23:39:44 remy-laptop kernel: [ 6139.648304] Dev sdb: unable to read RDB block 0
Dec 12 23:39:44 remy-laptop kernel: [ 6139.666870]  unable to read partition table
Dec 12 23:39:44 remy-laptop kernel: [ 6139.667049] sd 7:0:0:0: [sdb] Attached SCSI disk
Dec 12 23:39:44 remy-laptop kernel: [ 6139.667266] sd 7:0:0:0: Attached scsi generic sg2 type 0
Dec 12 23:45:31 remy-laptop kernel: [ 6486.934809] __ratelimit: 16 callbacks suppressed
Dec 12 23:48:00 remy-laptop kernel: [ 6635.350576] __ratelimit: 2 callbacks suppressed

fdisk: (In Ubuntu):

Code:

Disk /dev/sda: 100.0 GB, 100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4d384d37

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1       11785    94662981   83  Linux
/dev/sda2           11786       12161     3020220    5  Extended
/dev/sda5           11786       12161     3020188+  82  Linux swap / Solaris

These are all run in Ubuntu.

**cheapscotchron** · 12-12-2008

download UBCD iso. Make CD. Use CD to boot and then boot/nuke the old USB drive.
Ultimate Boot CD - Overview

**Huntsman191** · 12-13-2008

Any other options then using Ultimate Boot CD?

**cheapscotchron** · 12-13-2008

There are many options. ...
darik's boot and nuke
partition magic
to name a few.

What's your concern about UBCD? It's free, it works.

**Huntsman191** · 12-13-2008

What tool in UBCD should i use? out of the Harddrisk > Wiping Tools..

**MikeTbob** · 12-13-2008

That should do it, you might also find a formatting tool on the same CD, I'd create the new partition as FAT32 for using it with both Windows and Linux.

**Huntsman191** · 12-14-2008

What tool in wiping tools? They alll only seem to work on the local hard drive, not the USB Drive. Im a bit of a newbie to tools like this.

Thread Tools

Display

Bootable USB Hardrive Formatting Help

Posting Permissions