Find the answer to your Linux question:
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 26 of 26
Originally Posted by qub333 im gonna poke around portage more and see what i can find. qub, I'd sure like to know what you find. A couple of days ago ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #21
    Linux Guru
    Join Date
    May 2004
    Location
    forums.gentoo.org
    Posts
    1,817

    Quote Originally Posted by qub333
    im gonna poke around portage more and see what i can find.
    qub, I'd sure like to know what you find. A couple of days ago I looked through SourceForge and FreshMeat, besides Googling and I couldn't find anything that I thought would do. I can see volts and cpu temp in the BIOS setup, but after booting, I don't know where to see it.
    /IMHO
    //got nothin'
    ///this use to look better

  2. #22
    Linux Enthusiast puntmuts's Avatar
    Join Date
    Dec 2004
    Location
    Republic Banana
    Posts
    562
    http://secure.netroedge.com/~lm78/docs.html

    If you are using a 2.6 kernel be sure to read the 2.6 Info Page as well .
    I\'m so tired .....
    #200472

  3. #23
    SCS
    SCS is offline
    Just Joined!
    Join Date
    Jan 2005
    Location
    Germantown, MD
    Posts
    9
    CPU is running at 35C under full load. Nice Athlon XP 2500+.

    I have a tornado, 55 decibel fan, cranked up on a large copper heatsink. Works out quite nicely.

  4. $spacer_open
    $spacer_close
  5. #24
    Linux Enthusiast
    Join Date
    Dec 2004
    Location
    Rockin' in the USA!!!
    Posts
    603
    ~55 C here, I should overclock it more... Athlon XP 2800+

  6. #25
    Linux User Muser's Avatar
    Join Date
    May 2004
    Location
    Maryland
    Posts
    363
    Code:
    [ian@localhost ian]$ sensors
    it87-isa-0290
    Adapter: ISA adapter
    VCore 1:   +1.46 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
    VCore 2:   +1.54 V  (min =  +4.08 V, max =  +4.08 V)   ALARM
    +3.3V:     +6.72 V  (min =  +8.16 V, max =  +8.16 V)   ALARM
    +5V:       +5.00 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
    +12V:     +11.71 V  (min = +16.32 V, max = +16.32 V)   ALARM
    -12V:     -18.52 V  (min =  +3.93 V, max =  +3.93 V)   ALARM
    -5V:       -8.03 V  (min =  +4.03 V, max =  +4.03 V)   ALARM
    Stdby:     +4.95 V  (min =  +6.85 V, max =  +6.85 V)   ALARM
    VBat:      +3.25 V
    fan1:     3835 RPM  (min =    0 RPM, div = 8)
    fan2:        0 RPM  (min =    0 RPM, div = 8)
    fan3:        0 RPM  (min =    0 RPM, div = 8)
    M/B Temp:    +36C  (low  =    -1C, high =    -1C)   sensor = thermistor
    CPU Temp:    +26C  (low  =    -1C, high =    -1C)   sensor = thermistor
    Temp3:       +27C  (low  =  +127C, high =    -1C)   sensor = diode   ALARM
    What's all this? What do the "ALARM"s mean?

  7. #26
    Linux Enthusiast puntmuts's Avatar
    Join Date
    Dec 2004
    Location
    Republic Banana
    Posts
    562
    The ALARM means that measured values are not in the ranges of Min and Max. To configure those you will have to modify your sensors.conf file.
    I\'m so tired .....
    #200472

Page 3 of 3 FirstFirst 1 2 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •