Results 1 to 5 of 5
I have the above mentioned monitor. Its optimum resolution is 1440 x 900. I do not get this one in the YaST > Hardware > Graphics Card and Montor dialogue ...
- 07-15-2009 #1Linux User
- Join Date
- Jun 2007
- Posts
- 458
HP W1707 Monitor
I have the above mentioned monitor. Its optimum resolution is 1440 x 900. I do not get this one in the YaST > Hardware > Graphics Card and Montor dialogue box. I modified the monitor from HWP > w1707 to LCD --> 1440 x 900 @ 60 Hz. Still no avail. Here's my lspci - v output:
Code:linux-wjzw:~ # lspci -v 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Intel Corporation Device d612 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device d612 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at f140 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable- Capabilities: [d0] Power Management version 2 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d612 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Capabilities: [90] Subsystem: Intel Corporation Device d612 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: d0500000-d05fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Capabilities: [90] Subsystem: Intel Corporation Device d612 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at f080 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at f060 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at f040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at f020 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at d0604000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: d0400000-d04fffff Capabilities: [50] Subsystem: Intel Corporation Device d612 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Device d612 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f0f0 [size=16] Kernel driver in use: ata_piix Kernel modules: piix, ata_piix 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Intel Corporation Device d612 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at f0e0 [size=8] I/O ports at f0d0 [size=4] I/O ports at f0c0 [size=8] I/O ports at f0b0 [size=4] I/O ports at f0a0 [size=16] Capabilities: [70] Power Management version 2 Kernel driver in use: ata_piix Kernel modules: ata_piix 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation Device d612 Flags: medium devsel, IRQ 19 I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Intel Corporation Device d612 Flags: bus master, fast devsel, latency 0, IRQ 221 I/O ports at e000 [size=256] Memory at d0514000 (64-bit, prefetchable) [size=4K] Memory at d0510000 (64-bit, prefetchable) [size=16K] Expansion ROM at d0500000 [disabled] [size=64K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Count=1/1Enable+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 Communication controller: Agere Systems LT WinModem Subsystem: Agere Systems Device 044c Flags: bus master, medium devsel, latency 32, IRQ 3 Memory at d0400000 (32-bit, non-prefetchable) [size=256] I/O ports at d100 [size=8] I/O ports at d000 [size=256] Capabilities: [f8] Power Management version 2 linux-wjzw:~ #"When you have nothing to say, say nothing."
- 07-15-2009 #2
Post the contents of /etc/X11/xorg.conf file here.
It is amazing what you can accomplish if you do not care who gets the credit.
New Users: Read This First
- 07-15-2009 #3Linux User
- Join Date
- Jun 2007
- Posts
- 458
Should have done this earlier, but I was in a fix then:
Code:linux-wjzw:~ # cat /etc/X11/xorg.conf # /.../ # SaX generated X11 config file # Created on: 2009-07-14T14:27:00+0500. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" FontPath "/usr/share/fonts/latin2/100dpi:unscaled" FontPath "/usr/share/fonts/latin2/Type1" FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" Option "ZapWarning" "on" EndSection Section "Module" Load "freetype" Load "dbe" Load "dri" Load "glx" Load "extmod" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "microsoftpro" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "9" Option "Device" "/dev/input/mice" Option "Name" "ImExPS/2 Generic Explorer Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 366 229 HorizSync 50-70 Identifier "Monitor[0]" ModelName "1440X900@60HZ" Option "PreferredMode" "1440x900" VendorName "--> LCD" VertRefresh 50-60 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1440x900" 106 1440 1520 1672 1904 900 903 909 934 +hsync -vsync EndSection Section "Screen" SubSection "Display" Depth 15 Modes "default" EndSubSection SubSection "Display" Depth 16 Modes "default" EndSubSection SubSection "Display" Depth 24 Modes "default" EndSubSection SubSection "Display" Depth 8 Modes "default" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "Framebuffer Graphics" Driver "fbdev" Identifier "Device[0]" Screen 0 VendorName "VESA" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection linux-wjzw:~ #"When you have nothing to say, say nothing."
- 07-16-2009 #4Linux User
- Join Date
- Jun 2007
- Posts
- 458
Hey guys, anyone?
"When you have nothing to say, say nothing."
- 07-21-2009 #5
Edit HorizSync and VertRefresh rates:
Code:Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 366 229 HorizSync 31-70 Identifier "Monitor[0]" ModelName "1440X900@60HZ" Option "PreferredMode" "1440x900" VendorName "--> LCD" VertRefresh 50-160 UseModes "Modes[0]" EndSection
It is amazing what you can accomplish if you do not care who gets the credit.
New Users: Read This First


Reply With Quote
