Configure Nokia 1508i as a modem

[GutierrezPS]

Hello. This is my first post on this forum.

I have a Nokia 1508i, and I want to use it as a modem. But I've tried many times, many configurations and it didn't worked. Please help me!

When I connect it via USB to the computer, it's recognized as /dev/ttyUSB0 and /dev/ttyUSB1. When I try to connect using the

wvdial

, I get the following message:

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.

This is my /etc/wvdial.conf:

[Dialer giro]
Phone = #777
Username = xxxxxx
Password = xxxxx
Stupid mode = 1
Auto Reconnect = on

[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 230400
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem

This is the log of Windows when I connect:

01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600
01-13-2010 00:27:26.578 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600
01-13-2010 00:27:26.578 - Modem type: Nokia 1508i Modem
01-13-2010 00:27:26.578 - Modem inf path: oem6.inf
01-13-2010 00:27:26.578 - Modem inf section: ViaUsbModem
01-13-2010 00:27:26.578 - Hardware identification: usb\vid_0421&pid_018f&mi_00
01-13-2010 00:27:27.000 - 115200,8,N,1, ctsfl=0, rtsctl=1
01-13-2010 00:27:27.203 - Starting modem.
01-13-2010 00:27:27.203 - CD high while starting modem.
01-13-2010 00:27:27.218 - Sending: ATZE0Q0V1<cr>
01-13-2010 00:27:27.234 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.234 - Answer: OK
01-13-2010 00:27:27.250 - Sending: ATE0Q0V1&F&D2&C1S0=0<cr>
01-13-2010 00:27:27.265 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.265 - Answer: OK
01-13-2010 00:27:27.281 - Sending: ATS7=60 X4<cr>
01-13-2010 00:27:27.296 - Received: ATS7=60 X4<cr>
01-13-2010 00:27:27.296 - Command echo.
01-13-2010 00:27:27.296 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.296 - Answer: OK
01-13-2010 00:27:27.296 - Waiting call.
01-13-2010 00:27:27.296 - Sending: ATS0=0<cr>
01-13-2010 00:27:27.312 - Received: ATS0=0<cr>
01-13-2010 00:27:27.312 - Command echo.
01-13-2010 00:27:27.312 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.312 - Answer: OK
01-13-2010 00:27:27.312 - 115200,8,N,1, ctsfl=0, rtsctl=1
01-13-2010 00:27:27.531 - Starting Modem.
01-13-2010 00:27:27.531 - CD high while starting modem.
01-13-2010 00:27:27.546 - Sending: ATZE0Q0V1<cr>
01-13-2010 00:27:27.546 - Received: ATZE0Q0V1<cr>
01-13-2010 00:27:27.546 - Command echo.
01-13-2010 00:27:27.562 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.562 - Answer: OK
01-13-2010 00:27:27.562 - Sending: ATE0Q0V1&F&D2&C1S0=0<cr>
01-13-2010 00:27:27.593 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.593 - Answer: OK
01-13-2010 00:27:27.593 - Sending: ATS7=60 X4<cr>
01-13-2010 00:27:27.609 - Received: ATS7=60 X4<cr>
01-13-2010 00:27:27.609 - Command echo
01-13-2010 00:27:27.609 - Received: <cr><lf>OK<cr><lf>
01-13-2010 00:27:27.609 - Answer: OK
01-13-2010 00:27:27.609 - Dialing.
01-13-2010 00:27:27.609 - Sending: ATDT####<cr>
01-13-2010 00:27:27.640 - Received: ATDT#777<cr>
01-13-2010 00:27:27.640 - Command echo.
01-13-2010 00:27:29.890 - Received: <cr><lf>CONNECT<cr><lf>
01-13-2010 00:27:29.890 - Answer: connect
01-13-2010 00:27:29.890 - Connection stablished.
01-13-2010 00:27:29.890 - Data compression turned off or unknown.
01-13-2010 00:27:59.890 - Read: Total: 338, Per/S: 11, Write: Total: 3887, Per/S: 127

This is what I get when I execute

wvdialconf

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.


Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?

Please, help me!

[Rubberman]

What distribution+version of Linux are you using, and what is your GUI desktop manager (Gnome, KDE, etc)? You need to go to the network manager and add a PPP connection most likely. You will then likely need to add the connection strings to the configuration so it can connect properly.

[GutierrezPS]

I'm sorry for the long time without answer.

Now I'm using Ubuntu 10.10.

I run

modprobe usbserial vendor=0x0421 product=0x018f

to create the files /dev/ttyUSB0 and /dev/ttyUSB1.

I just get an answer form the modem when I run

echo -e "ATDT#777" >> /dev/ttyUSB0

And I just get connected with wvdial when I use the modem first at Windows.

Can somebody hep me?