Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
Hi, I'm getting these errors every time I enter a dvd: Code: Apr 25 20:14:34 jantar kernel: [ 5508.524000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181

    Entering DVD freezes system , FS error exception Emask


    Hi,

    I'm getting these errors every time I enter a dvd:
    Code:
    Apr 25 20:14:34 jantar kernel: [ 5508.524000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    Apr 25 20:14:34 jantar kernel: [ 5508.524000] ata2.00: cmd ca/00:08:cf:54:c2/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 out
    Apr 25 20:14:34 jantar kernel: [ 5508.524000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    Apr 25 20:14:34 jantar kernel: [ 5508.524000] ata2: soft resetting port
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] ata2.00: configured for UDMA/33
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] ata2: EH complete
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] sd 1:0:0:0: [sda] Write Protect is off
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 25 20:14:34 jantar kernel: [ 5508.724000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 25 20:14:37 jantar kernel: [ 5511.524000] ISO 9660 Extensions: Microsoft Joliet Level 3
    Apr 25 20:14:37 jantar kernel: [ 5511.564000] ISOFS: changing to secondary root
    And the system is getting slow, clearly there is something going in the harddrive then, and the system is freezing.

    I have not seen this error coming other than when I'm entering dvd/cd.

    My kernel is :
    Code:
     2.6.22-14-generic
    I'm using kubuntu 7.10

    This is happening for the last 4-5 hours. Within this time, I have upgraded the kernel.
    Also, from yesterday, twice fsck exited with status 4 at bootup time, and I had to fix those errors manually. It looks like:
    Code:
    Error reading block 180224 while getting next inode from scan
    
    UNEXPECTED INCONSISTENCY
    fsck died with exit status 4
    Please help.
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  2. #2
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    My full dmesg:
    Code:
    [    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ec11000 (usable)
    [    0.000000]  BIOS-e820: 000000003ec11000 - 000000003ec13000 (reserved)
    [    0.000000]  BIOS-e820: 000000003ec13000 - 000000003ecfa000 (usable)
    [    0.000000]  BIOS-e820: 000000003ecfa000 - 000000003edea000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003edea000 - 000000003edee000 (usable)
    [    0.000000]  BIOS-e820: 000000003edee000 - 000000003edf3000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003edf3000 - 000000003edf4000 (usable)
    [    0.000000]  BIOS-e820: 000000003edf4000 - 000000003edff000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003edff000 - 000000003ee00000 (usable)
    [    0.000000]  BIOS-e820: 000000003ee00000 - 000000003f800000 (reserved)
    [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [    0.000000] 110MB HIGHMEM available.
    [    0.000000] 896MB LOWMEM available.
    [    0.000000] found SMP MP-table at 000fe200
    [    0.000000] Entering add_active_range(0, 0, 257536) 0 entries of 256 used
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA             0 ->     4096
    [    0.000000]   Normal       4096 ->   229376
    [    0.000000]   HighMem    229376 ->   257536
    [    0.000000] early_node_map[1] active PFN ranges
    [    0.000000]     0:        0 ->   257536
    [    0.000000] On node 0 totalpages: 257536
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1760 pages used for memmap
    [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 220 pages used for memmap
    [    0.000000]   HighMem zone: 27940 pages, LIFO batch:7
    [    0.000000] DMI 2.4 present.
    [    0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
    [    0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
    [    0.000000] ACPI: RSDT 3EDFD038, 004C (r1 INTEL  DG33BU         D8       1000013)
    [    0.000000] ACPI: FACP 3EDFC000, 0074 (r1 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: DSDT 3EDF8000, 3C7D (r1 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: FACS 3ED9E000, 0040
    [    0.000000] ACPI: APIC 3EDF7000, 0078 (r1 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: WDDT 3EDF6000, 0040 (r1 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: MCFG 3EDF5000, 003C (r1 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: ASF! 3EDF4000, 00A6 (r32 INTEL  DG33BU         D8 MSFT  1000013)
    [    0.000000] ACPI: SSDT 3EDF2000, 01B4 (r1 INTEL     CpuPm       D8 MSFT  1000013)
    [    0.000000] ACPI: SSDT 3EDF1000, 0264 (r1 INTEL   Cpu0Ist       D8 MSFT  1000013)
    [    0.000000] ACPI: SSDT 3EDF0000, 0264 (r1 INTEL   Cpu1Ist       D8 MSFT  1000013)
    [    0.000000] ACPI: SSDT 3EDEF000, 0264 (r1 INTEL   Cpu2Ist       D8 MSFT  1000013)
    [    0.000000] ACPI: SSDT 3EDEE000, 0264 (r1 INTEL   Cpu3Ist       D8 MSFT  1000013)
    [    0.000000] ACPI: PM-Timer IO Port: 0x408
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] Processor #0 6:15 APIC version 20
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] Processor #1 6:15 APIC version 20
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:b0800000)
    [    0.000000] Built 1 zonelists.  Total pages: 255524
    [    0.000000] Kernel command line: root=UUID=2d0369f9-5ba4-4e83-9343-ffe149628f64 ro quiet splash
    [    0.000000] mapped APIC to ffffd000 (fee00000)
    [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [    0.000000] Detected 2200.131 MHz processor.
    [   25.494212] Console: colour VGA+ 80x25
    [   25.494463] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [   25.494709] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [   25.515100] Memory: 1008376k/1030144k available (2015k kernel code, 20136k reserved, 916k data, 364k init, 111608k highmem)
    [   25.515107] virtual kernel memory layout:
    [   25.515108]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
    [   25.515109]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [   25.515110]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    [   25.515111]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    [   25.515112]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
    [   25.515112]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
    [   25.515113]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
    [   25.515115] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [   25.515141] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    [   25.595088] Calibrating delay using timer specific routine.. 4403.62 BogoMIPS (lpj=8807257)
    [   25.595105] Security Framework v1.0.0 initialized
    [   25.595109] SELinux:  Disabled at boot.
    [   25.595119] Mount-cache hash table entries: 512
    [   25.595204] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
    [   25.595211] monitor/mwait feature present.
    [   25.595213] using mwait in idle threads.
    [   25.595216] CPU: L1 I cache: 32K, L1 D cache: 32K
    [   25.595217] CPU: L2 cache: 2048K
    [   25.595219] CPU: Physical Processor ID: 0
    [   25.595221] CPU: Processor Core ID: 0
    [   25.595222] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
    [   25.595229] Compat vDSO mapped to ffffe000.
    [   25.595237] Checking 'hlt' instruction... OK.
    [   25.611194] SMP alternatives: switching to UP code
    [   25.611527] Early unpacking initramfs... done
    [   25.871407] ACPI: Core revision 20070126
    [   25.871443] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    [   25.875309] CPU0: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
    [   25.875322] SMP alternatives: switching to SMP code
    [   25.875403] Booting processor 1/1 eip 3000
    [   25.885543] Initializing CPU#1
    [   25.962761] Calibrating delay using timer specific routine.. 4088.88 BogoMIPS (lpj=8177766)
    [   25.962766] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
    [   25.962771] monitor/mwait feature present.
    [   25.962774] CPU: L1 I cache: 32K, L1 D cache: 32K
    [   25.962776] CPU: L2 cache: 2048K
    [   25.962777] CPU: Physical Processor ID: 0
    [   25.962779] CPU: Processor Core ID: 1
    [   25.962780] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
    [   25.963259] CPU1: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz stepping 0d
    [   25.963275] Total of 2 processors activated (8492.51 BogoMIPS).
    [   25.963417] ENABLING IO-APIC IRQs
    [   25.963583] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [   26.110720] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [   26.130714] Brought up 2 CPUs
    [   26.389961] migration_cost=42
    [   26.390070] Booting paravirtualized kernel on bare hardware
    [   26.390122] Time: 13:12:46  Date: 03/25/110
    [   26.390138] NET: Registered protocol family 16
    [   26.390204] EISA bus registered
    [   26.390208] ACPI: bus type pci registered
    [   26.391832] PCI: Using configuration type 1
    [   26.391834] Setting up standard PCI resources
    [   26.398610] ACPI: EC: Look up EC in DSDT
    [   26.400214] ACPI: Interpreter enabled
    [   26.400217] ACPI: (supports S0 S1 S3 S4 S5)
    [   26.400229] ACPI: Using IOAPIC for interrupt routing
    [   26.408645] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [   26.408664] PCI: Probing PCI hardware (bus 00)
    [   26.410045] PCI: Transparent bridge - 0000:00:1e.0
    [   26.410109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [   26.410394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    [   26.410589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    [   26.410673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    [   26.410755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    [   26.410838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    [   26.410920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    [   26.414642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [   26.414716] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [   26.414788] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
    [   26.414859] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [   26.414931] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
    [   26.415001] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [   26.415072] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [   26.415142] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [   26.415231] Linux Plug and Play Support v0.97 (c) Adam Belay
    [   26.415242] pnp: PnP ACPI init
    [   26.415248] ACPI: bus type pnp registered
    [   26.417026] pnp: PnP ACPI: found 11 devices
    [   26.417028] ACPI: ACPI bus type pnp unregistered
    [   26.417031] PnPBIOS: Disabled by ACPI PNP
    [   26.417062] PCI: Using ACPI for IRQ routing
    [   26.417064] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    [   26.417144] NET: Registered protocol family 8
    [   26.417146] NET: Registered protocol family 20
    [   26.417185] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff could not be reserved
    [   26.417188] pnp: 00:01: iomem range 0xfeb00000-0xfeb03fff has been reserved
    [   26.417190] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
    [   26.417192] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    [   26.417198] pnp: 00:06: ioport range 0x500-0x53f has been reserved
    [   26.417200] pnp: 00:06: ioport range 0x400-0x47f has been reserved
    [   26.417202] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
    [   26.418373] Time: tsc clocksource has been installed.
    [   26.447414] PCI: Bridge: 0000:00:1c.0
    [   26.447416]   IO window: disabled.
    [   26.447420]   MEM window: 50400000-504fffff
    [   26.447423]   PREFETCH window: disabled.
    [   26.447427] PCI: Bridge: 0000:00:1c.1
    [   26.447429]   IO window: 1000-1fff
    [   26.447433]   MEM window: 50100000-501fffff
    [   26.447436]   PREFETCH window: disabled.
    [   26.447440] PCI: Bridge: 0000:00:1c.2
    [   26.447441]   IO window: disabled.
    [   26.447445]   MEM window: 50500000-505fffff
    [   26.447448]   PREFETCH window: disabled.
    [   26.447452] PCI: Bridge: 0000:00:1c.3
    [   26.447453]   IO window: disabled.
    [   26.447457]   MEM window: 50600000-506fffff
    [   26.447460]   PREFETCH window: disabled.
    [   26.447463] PCI: Bridge: 0000:00:1c.4
    [   26.447464]   IO window: disabled.
    [   26.447468]   MEM window: 50700000-507fffff
    [   26.447471]   PREFETCH window: disabled.
    [   26.447475] PCI: Bridge: 0000:00:1e.0
    [   26.447476]   IO window: disabled.
    [   26.447480]   MEM window: 50000000-500fffff
    [   26.447483]   PREFETCH window: disabled.
    [   26.447500] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
    [   26.447504] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
    [   26.447510] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [   26.447526] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 17
    [   26.447530] PCI: Setting latency timer of device 0000:00:1c.1 to 64
    [   26.447544] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
    [   26.447547] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    [   26.447552] PCI: Setting latency timer of device 0000:00:1c.2 to 64
    [   26.447566] PCI: Enabling device 0000:00:1c.3 (0000 -> 0002)
    [   26.447569] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
    [   26.447574] PCI: Setting latency timer of device 0000:00:1c.3 to 64
    [   26.447588] PCI: Enabling device 0000:00:1c.4 (0000 -> 0002)
    [   26.447591] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
    [   26.447595] PCI: Setting latency timer of device 0000:00:1c.4 to 64
    [   26.447604] PCI: Setting latency timer of device 0000:00:1e.0 to 64
    [   26.447612] NET: Registered protocol family 2
    [   26.486536] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [   26.486598] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
    [   26.487242] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [   26.487490] TCP: Hash tables configured (established 131072 bind 65536)
    [   26.487493] TCP reno registered
    [   26.498744] checking if image is initramfs... it is
    [   26.946259] Switched to high resolution mode on CPU 1
    [   26.950164] Switched to high resolution mode on CPU 0
    [   27.016514] Freeing initrd memory: 7356k freed
    [   27.016967] audit: initializing netlink socket (disabled)
    [   27.016979] audit(1272201166.284:1): initialized
    [   27.017050] highmem bounce pool size: 64 pages
    [   27.018483] VFS: Disk quotas dquot_6.5.1
    [   27.018518] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [   27.018584] io scheduler noop registered
    [   27.018585] io scheduler anticipatory registered
    [   27.018587] io scheduler deadline registered
    [   27.018597] io scheduler cfq registered (default)
    [   27.018609] Boot video device is 0000:00:02.0
    [   27.018963] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [   27.018999] assign_interrupt_mode Found MSI capability
    [   27.019001] Allocate Port Service[0000:00:1c.0:pcie00]
    [   27.019028] Allocate Port Service[0000:00:1c.0:pcie02]
    [   27.019091] PCI: Setting latency timer of device 0000:00:1c.1 to 64
    [   27.019127] assign_interrupt_mode Found MSI capability
    [   27.019128] Allocate Port Service[0000:00:1c.1:pcie00]
    [   27.019150] Allocate Port Service[0000:00:1c.1:pcie02]
    [   27.019213] PCI: Setting latency timer of device 0000:00:1c.2 to 64
    [   27.019248] assign_interrupt_mode Found MSI capability
    [   27.019250] Allocate Port Service[0000:00:1c.2:pcie00]
    [   27.019273] Allocate Port Service[0000:00:1c.2:pcie02]
    [   27.019338] PCI: Setting latency timer of device 0000:00:1c.3 to 64
    [   27.019373] assign_interrupt_mode Found MSI capability
    [   27.019375] Allocate Port Service[0000:00:1c.3:pcie00]
    [   27.019398] Allocate Port Service[0000:00:1c.3:pcie02]
    [   27.019461] PCI: Setting latency timer of device 0000:00:1c.4 to 64
    [   27.019496] assign_interrupt_mode Found MSI capability
    [   27.019498] Allocate Port Service[0000:00:1c.4:pcie00]
    [   27.019521] Allocate Port Service[0000:00:1c.4:pcie02]
    [   27.019638] isapnp: Scanning for PnP cards...
    [   27.347408] isapnp: No Plug & Play device found
    [   27.362762] Real Time Clock Driver v1.12ac
    [   27.362845] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [   27.362933] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [   27.363034] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    [   27.363455] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [   27.363941] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    [   27.364038] input: Macintosh mouse button emulation as /class/input/input0
    [   27.364098] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [   27.366939] serio: i8042 KBD port at 0x60,0x64 irq 1
    [   27.366943] serio: i8042 AUX port at 0x60,0x64 irq 12
    [   27.367041] mice: PS/2 mouse device common for all mice
    [   27.367118] EISA: Probing bus 0 at eisa.0
    [   27.367123] Cannot allocate resource for EISA slot 1
    [   27.367125] Cannot allocate resource for EISA slot 2
    [   27.367144] EISA: Detected 0 cards.
    [   27.367218] TCP cubic registered
    [   27.367232] NET: Registered protocol family 1
    [   27.367250] Using IPI No-Shortcut mode
    [   27.367393]   Magic number: 6:412:231
    [   27.367410]   hash matches device ttyv1
    [   27.367644] Freeing unused kernel memory: 364k freed
    [   27.387279] input: AT Translated Set 2 keyboard as /class/input/input1
    [   28.532167] AppArmor: AppArmor initialized<5>audit(1272201167.784:2):  type=1505 info="AppArmor initialized" pid=1232
    [   28.536614] fuse init (API version 7.8)
    [   28.539883] Failure registering capabilities with primary security module.
    [   28.565980] Monitor-Mwait will be used to enter C-1 state
    [   28.565985] ACPI: CPU0 (power states: C1[C1] C2[C2])
    [   28.565988] ACPI: Processor [CPU0] (supports 8 throttling states)
    [   28.566098] ACPI: CPU1 (power states: C1[C1] C2[C2])
    [   28.566102] ACPI: Processor [CPU1] (supports 8 throttling states)
    [   28.566113] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    [   28.566121] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
    [    2.944000] Marking TSC unstable due to: possible TSC halt in C2.
    [    2.948000] Time: acpi_pm clocksource has been installed.
    [    3.260000] usbcore: registered new interface driver usbfs
    [    3.260000] usbcore: registered new interface driver hub
    [    3.260000] usbcore: registered new device driver usb
    [    3.260000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 16
    [    3.260000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
    [    3.260000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [    3.260000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [    3.260000] ehci_hcd 0000:00:1a.7: debug port 1
    [    3.260000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    [    3.260000] ehci_hcd 0000:00:1a.7: irq 16, io mem 0x503a5400
    [    3.264000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    3.264000] USB Universal Host Controller Interface driver v3.0
    [    3.264000] usb usb1: configuration #1 chosen from 1 choice
    [    3.264000] hub 1-0:1.0: USB hub found
    [    3.264000] hub 1-0:1.0: 6 ports detected
    [    3.308000] SCSI subsystem initialized
    [    3.312000] libata version 2.21 loaded.
    [    3.368000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
    [    3.368000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
    [    3.368000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    3.368000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [    3.368000] ehci_hcd 0000:00:1d.7: debug port 1
    [    3.368000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    [    3.368000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x503a5000
    [    3.372000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    3.372000] usb usb2: configuration #1 chosen from 1 choice
    [    3.372000] hub 2-0:1.0: USB hub found
    [    3.372000] hub 2-0:1.0: 6 ports detected
    [    3.476000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 18
    [    3.476000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
    [    3.476000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [    3.476000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [    3.476000] uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020c0
    [    3.476000] usb usb3: configuration #1 chosen from 1 choice
    [    3.476000] hub 3-0:1.0: USB hub found
    [    3.476000] hub 3-0:1.0: 2 ports detected
    [    3.580000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
    [    3.580000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
    [    3.580000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [    3.580000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [    3.580000] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0
    [    3.580000] usb usb4: configuration #1 chosen from 1 choice
    [    3.580000] hub 4-0:1.0: USB hub found
    [    3.580000] hub 4-0:1.0: 2 ports detected
    [    3.612000] usb 1-2: new high speed USB device using ehci_hcd and address 2
    [    3.684000] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 16
    [    3.684000] PCI: Setting latency timer of device 0000:00:1a.2 to 64
    [    3.684000] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [    3.684000] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [    3.684000] uhci_hcd 0000:00:1a.2: irq 16, io base 0x00002080
    [    3.684000] usb usb5: configuration #1 chosen from 1 choice
    [    3.684000] hub 5-0:1.0: USB hub found
    [    3.684000] hub 5-0:1.0: 2 ports detected
    [    3.744000] usb 1-2: configuration #1 chosen from 1 choice
    [    3.744000] hub 1-2:1.0: USB hub found
    [    3.744000] hub 1-2:1.0: 4 ports detected
    [    3.788000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
    [    3.788000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
    [    3.788000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    3.788000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [    3.788000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002060
    [    3.788000] usb usb6: configuration #1 chosen from 1 choice
    [    3.788000] hub 6-0:1.0: USB hub found
    [    3.788000] hub 6-0:1.0: 2 ports detected
    [    3.892000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    [    3.892000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
    [    3.892000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    3.892000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [    3.892000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
    [    3.892000] usb usb7: configuration #1 chosen from 1 choice
    [    3.892000] hub 7-0:1.0: USB hub found
    [    3.892000] hub 7-0:1.0: 2 ports detected
    [    3.996000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    [    3.996000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
    [    3.996000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    3.996000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [    3.996000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
    [    3.996000] usb usb8: configuration #1 chosen from 1 choice
    [    3.996000] hub 8-0:1.0: USB hub found
    [    3.996000] hub 8-0:1.0: 2 ports detected
    [    4.100000] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
    [    4.144000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[50004000-500047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    4.148000] ata_piix 0000:00:1f.2: version 2.11
    [    4.148000] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    4.148000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
    [    4.148000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
    [    4.148000] scsi0 : ata_piix
    [    4.148000] scsi1 : ata_piix
    [    4.148000] ata1: SATA max UDMA/133 cmd 0x00012158 ctl 0x00012176 bmdma 0x00012130 irq 21
    [    4.148000] ata2: SATA max UDMA/133 cmd 0x00012150 ctl 0x00012172 bmdma 0x00012138 irq 21
    [    4.200000] usb 1-2.3: new high speed USB device using ehci_hcd and address 3
    [    4.292000] usb 1-2.3: configuration #1 chosen from 1 choice
    [    4.300000] usbcore: registered new interface driver libusual
    [    4.312000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    [    4.312000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [    4.312000] Initializing USB Mass Storage driver...
    [    4.312000] scsi2 : SCSI emulation for USB Mass Storage devices
    [    4.312000] usb-storage: device found at 3
    [    4.312000] usb-storage: waiting for device to settle before scanning
    [    4.312000] usbcore: registered new interface driver usb-storage
    [    4.312000] USB Mass Storage support registered.
    [    4.500000] ata2.00: ATA-8: WDC WD3200AAJS-00YZCA0, 01.03B01, max UDMA/133
    [    4.500000] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    4.516000] ata2.00: configured for UDMA/133
    [    4.516000] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
    [    4.516000] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
    [    4.516000] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 21 (level, low) -> IRQ 21
    [    4.516000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
    [    4.516000] scsi3 : ata_piix
    [    4.516000] scsi4 : ata_piix
    [    4.516000] ata3: SATA max UDMA/133 cmd 0x00012148 ctl 0x0001216e bmdma 0x00012110 irq 21
    [    4.516000] ata4: SATA max UDMA/133 cmd 0x00012140 ctl 0x0001216a bmdma 0x00012118 irq 21
    [    4.848000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
    [    4.848000] PCI: Setting latency timer of device 0000:02:00.0 to 64
    [    4.848000] scsi5 : pata_marvell
    [    4.848000] scsi6 : pata_marvell
    [    4.848000] ata5: PATA max UDMA/100 cmd 0x00011018 ctl 0x00011026 bmdma 0x00011000 irq 16
    [    4.848000] ata6: DUMMY
    [    4.848000] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 
    [    4.852000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    4.852000] sd 1:0:0:0: [sda] Write Protect is off
    [    4.852000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    4.852000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.852000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    4.852000] sd 1:0:0:0: [sda] Write Protect is off
    [    4.852000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    4.852000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    4.852000]  sda: sda1 sda2 sda3 < sda5 >
    [    4.880000] sd 1:0:0:0: [sda] Attached SCSI disk
    [    4.880000] sd 1:0:0:0: Attached scsi generic sg0 type 0
    [    5.096000] Attempting manual resume
    [    5.096000] swsusp: Resume From Partition 8:2
    [    5.096000] PM: Checking swsusp image.
    [    5.096000] PM: Resume from disk failed.
    [    5.140000] kjournald starting.  Commit interval 5 seconds
    [    5.140000] EXT3-fs: mounted filesystem with ordered data mode.
    [    5.356000] ata5.01: ATAPI: ASUS    DRW-22B1S, 1.01, max UDMA/66
    [    5.416000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090270001e71556]
    [    5.528000] ata5.01: configured for UDMA/66
    [    5.528000] scsi 5:0:1:0: CD-ROM            ASUS     DRW-22B1S        1.01 PQ: 0 ANSI: 5
    [    5.528000] scsi 5:0:1:0: Attached scsi generic sg1 type 5
    [    9.312000] usb-storage: device scan complete
    [    9.312000] scsi 2:0:0:0: Direct-Access     Seagate  Desktop          0130 PQ: 0 ANSI: 4
    [    9.324000] Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
    [    9.324000] Copyright (c) 1999-2007 Intel Corporation.
    [    9.324000] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17
    [    9.324000] PCI: Setting latency timer of device 0000:00:19.0 to 64
    [    9.332000] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
    [    9.336000] sd 2:0:0:0: [sdb] Write Protect is off
    [    9.336000] sd 2:0:0:0: [sdb] Mode Sense: 2f 08 00 00
    [    9.336000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    9.340000] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
    [    9.344000] sd 2:0:0:0: [sdb] Write Protect is off
    [    9.344000] sd 2:0:0:0: [sdb] Mode Sense: 2f 08 00 00
    [    9.344000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [    9.344000]  sdb: sdb1
    [    9.348000] sd 2:0:0:0: [sdb] Attached SCSI disk
    [    9.348000] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [    9.372000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:ac:a1:46
    [    9.404000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    9.440000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    [    9.440000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [    9.508000] Linux agpgart interface v0.102 (c) Dave Jones
    [    9.644000] heci: Intel(R) AMT Management Interface - version 3.1.0.31
    [    9.644000] heci: Copyright (c) 2003 - 2007 Intel Corporation.
    [    9.644000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 22
    [    9.644000] PCI: Setting latency timer of device 0000:00:03.0 to 64
    [    9.644000] heci: link layer has been established.
    [    9.700000] input: PC Speaker as /class/input/input2
    [    9.748000] heci: heci driver initialization successful.
    [    9.748000] agpgart: Detected an Intel G33 Chipset.
    [    9.748000] agpgart: Detected 7164K stolen memory.
    [    9.764000] agpgart: AGP aperture is 256M @ 0x40000000
    [    9.856000] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
    [    9.856000] Uniform CD-ROM driver Revision: 3.20
    [    9.856000] sr 5:0:1:0: Attached scsi CD-ROM sr0
    [    9.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   10.012000] Netfilter messages via NETLINK v0.30.
    [   10.024000] nf_conntrack version 0.5.0 (8048 buckets, 64384 max)
    [   10.124000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
    [   10.124000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
    [   10.356000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    [   10.364000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
    [   11.284000] NET: Registered protocol family 17
    [   11.560000] lp: driver loaded but no devices found
    [   11.600000] Adding 498004k swap on /dev/sda2.  Priority:-1 extents:1 across:498004k
    [   11.796000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    [   11.796000] e1000: eth0: e1000_watchdog_task: 10/100 speed: disabling TSO
    [   11.896000] EXT3 FS on sda1, internal journal
    [   12.324000] kjournald starting.  Commit interval 5 seconds
    [   12.324000] EXT3 FS on sda5, internal journal
    [   12.324000] EXT3-fs: mounted filesystem with ordered data mode.
    [   12.908000] input: Power Button (FF) as /class/input/input4
    [   12.908000] ACPI: Power Button (FF) [PWRF]
    [   12.932000] input: Sleep Button (CM) as /class/input/input5
    [   12.932000] ACPI: Sleep Button (CM) [SLPB]
    [   12.980000] No dock devices found.
    [   14.416000] ppdev: user-space parallel port driver
    [   14.472000] audit(1272201179.982:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5065 profile="/usr/sbin/cupsd"
    [   15.236000] [drm] Initialized drm 1.1.0 20060810
    [   15.236000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
    [   15.236000] [drm] Initialized i915 1.6.0 20060119 on minor 0
    [   15.236000] set status page addr 0x00033000
    [   15.992000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [   15.992000] apm: disabled - APM is not SMP safe.
    [   16.760000] Failure registering capabilities with primary security module.
    [   16.896000] Bluetooth: Core ver 2.11
    [   16.896000] NET: Registered protocol family 31
    [   16.896000] Bluetooth: HCI device and connection manager initialized
    [   16.896000] Bluetooth: HCI socket layer initialized
    [   16.916000] Bluetooth: L2CAP ver 2.8
    [   16.916000] Bluetooth: L2CAP socket layer initialized
    [   16.968000] Bluetooth: RFCOMM socket layer initialized
    [   16.968000] Bluetooth: RFCOMM TTY layer initialized
    [   16.968000] Bluetooth: RFCOMM ver 1.8
    [   17.648000] iptables denied: IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 
    [   17.652000] iptables denied: IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=141 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=121 
    [   17.884000] NET: Registered protocol family 10
    [   17.884000] lo: Disabled Privacy Extensions
    [   17.904000] iptables denied: IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 
    [   18.152000] iptables denied: IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 
    [   18.352000] iptables denied: IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=224.0.0.251 LEN=207 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=187 
    [   28.836000] eth0: no IPv6 routers present
    [   42.200000] iptables denied: IN=eth0 OUT= MAC=00:19:d1:ac:a1:46:00:1b:57:95:a1:6c:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=352 TOS=0x00 PREC=0x00 TTL=64 ID=276 DF PROTO=UDP SPT=1900 DPT=32769 LEN=332 
    [   42.200000] iptables denied: IN=eth0 OUT= MAC=00:19:d1:ac:a1:46:00:1b:57:95:a1:6c:08:00 SRC=192.168.1.1 DST=192.168.1.2 LEN=352 TOS=0x00 PREC=0x00 TTL=64 ID=277 DF PROTO=UDP SPT=1900 DPT=32769 LEN=332 
    [  795.288000] UDF-fs: No VRS found
    [  795.352000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [  795.476000] ISO 9660 Extensions: RRIP_1991A
    [  930.536000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [  930.536000] ata2.00: cmd ca/00:58:3f:06:72/00:00:00:00:00/e2 tag 0 cdb 0x0 data 45056 out
    [  930.536000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [  930.536000] ata2: soft resetting port
    [  930.736000] ata2.00: configured for UDMA/133
    [  930.736000] ata2: EH complete
    [  930.736000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [  930.736000] sd 1:0:0:0: [sda] Write Protect is off
    [  930.736000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [  930.736000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1450.184000] UDF-fs: No VRS found
    [ 1450.264000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 1450.316000] ISO 9660 Extensions: RRIP_1991A
    [ 1510.864000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1510.864000] ata2.00: cmd 35/00:00:cf:ac:0c/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1510.864000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1510.864000] ata2: soft resetting port
    [ 1511.064000] ata2.00: configured for UDMA/133
    [ 1511.064000] ata2: EH complete
    [ 1511.068000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1511.072000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1511.072000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1511.076000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1541.132000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1541.132000] ata2.00: cmd 35/00:00:bf:d8:0c/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1541.132000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1541.132000] ata2: soft resetting port
    [ 1541.328000] ata2.00: configured for UDMA/133
    [ 1541.328000] ata2: EH complete
    [ 1541.332000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1541.332000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1541.332000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1541.356000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1571.368000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1571.368000] ata2.00: cmd 35/00:00:c7:f8:0c/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1571.368000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1571.368000] ata2: soft resetting port
    [ 1571.564000] ata2.00: configured for UDMA/133
    [ 1571.564000] ata2: EH complete
    [ 1571.568000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1571.568000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1571.568000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1571.572000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1601.632000] ata2.00: limiting speed to UDMA/100:PIO4
    [ 1601.632000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1601.632000] ata2.00: cmd 35/00:00:cf:30:0d/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1601.632000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1601.632000] ata2: soft resetting port
    [ 1601.832000] ata2.00: configured for UDMA/100
    [ 1601.832000] ata2: EH complete
    [ 1601.836000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1601.836000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1601.836000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1601.864000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1631.888000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1631.888000] ata2.00: cmd 35/00:00:df:58:0d/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1631.888000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1631.888000] ata2: soft resetting port
    [ 1632.096000] ata2.00: configured for UDMA/100
    [ 1632.096000] ata2: EH complete
    [ 1632.100000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1632.100000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1632.100000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1632.104000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1662.120000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1662.120000] ata2.00: cmd 35/00:00:e7:84:0d/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1662.120000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1662.124000] ata2: soft resetting port
    [ 1662.332000] ata2.00: configured for UDMA/100
    [ 1662.332000] ata2: EH complete
    [ 1662.336000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1662.336000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1662.336000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1662.340000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1692.392000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1692.392000] ata2.00: cmd 35/00:00:37:c9:0d/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1692.392000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1692.392000] ata2: soft resetting port
    [ 1692.600000] ata2.00: configured for UDMA/100
    [ 1692.600000] ata2: EH complete
    [ 1692.604000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1692.604000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1692.604000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1692.608000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1722.704000] ata2.00: limiting speed to UDMA/33:PIO4
    [ 1722.704000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1722.704000] ata2.00: cmd 35/00:00:7f:fd:0d/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1722.704000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1722.704000] ata2: soft resetting port
    [ 1722.908000] ata2.00: configured for UDMA/33
    [ 1722.908000] ata2: EH complete
    [ 1722.912000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1722.912000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1722.912000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1722.920000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1752.980000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1752.980000] ata2.00: cmd 35/00:00:0f:2a:0e/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1752.980000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1752.980000] ata2: soft resetting port
    [ 1753.184000] ata2.00: configured for UDMA/33
    [ 1753.184000] ata2: EH complete
    [ 1753.188000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1753.188000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1753.188000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1753.192000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1783.220000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1783.220000] ata2.00: cmd 35/00:00:9f:6a:0e/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1783.220000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1783.220000] ata2: soft resetting port
    [ 1783.428000] ata2.00: configured for UDMA/33
    [ 1783.428000] ata2: EH complete
    [ 1783.432000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1783.432000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1783.432000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1783.436000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1813.496000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1813.496000] ata2.00: cmd 35/00:00:a7:a2:0e/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1813.496000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1813.496000] ata2: soft resetting port
    [ 1813.696000] ata2.00: configured for UDMA/33
    [ 1813.696000] ata2: EH complete
    [ 1813.696000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1813.700000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1813.700000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1813.704000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1843.740000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1843.740000] ata2.00: cmd 35/00:00:b7:d2:0e/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1843.740000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1843.740000] ata2: soft resetting port
    [ 1843.940000] ata2.00: configured for UDMA/33
    [ 1843.940000] ata2: EH complete
    [ 1843.944000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1843.944000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1843.944000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1843.948000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1874.052000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1874.052000] ata2.00: cmd 35/00:00:c7:06:0f/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1874.052000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1874.052000] ata2: soft resetting port
    [ 1874.256000] ata2.00: configured for UDMA/33
    [ 1874.256000] ata2: EH complete
    [ 1874.260000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1874.260000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1874.260000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1874.264000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1904.288000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1904.288000] ata2.00: cmd 35/00:00:cf:3e:0f/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1904.288000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1904.288000] ata2: soft resetting port
    [ 1904.484000] ata2.00: configured for UDMA/33
    [ 1904.484000] ata2: EH complete
    [ 1904.488000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1904.488000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1904.488000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1904.492000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1934.544000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1934.544000] ata2.00: cmd 35/00:00:df:7a:0f/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1934.544000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1934.544000] ata2: soft resetting port
    [ 1934.744000] ata2.00: configured for UDMA/33
    [ 1934.744000] ata2: EH complete
    [ 1934.748000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1934.748000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1934.748000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1934.752000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1964.832000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1964.832000] ata2.00: cmd 35/00:00:ef:aa:0f/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1964.832000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1964.832000] ata2: soft resetting port
    [ 1965.032000] ata2.00: configured for UDMA/33
    [ 1965.032000] ata2: EH complete
    [ 1965.036000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1965.036000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1965.036000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1965.040000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1995.104000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 1995.104000] ata2.00: cmd 35/00:00:ff:ea:0f/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 1995.104000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 1995.104000] ata2: soft resetting port
    [ 1995.312000] ata2.00: configured for UDMA/33
    [ 1995.312000] ata2: EH complete
    [ 1995.316000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 1995.316000] sd 1:0:0:0: [sda] Write Protect is off
    [ 1995.316000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1995.320000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2025.512000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2025.512000] ata2.00: cmd 35/00:00:87:42:10/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2025.512000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2025.512000] ata2: soft resetting port
    [ 2025.704000] ata2.00: configured for UDMA/33
    [ 2025.704000] ata2: EH complete
    [ 2025.708000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2025.708000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2025.708000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2025.712000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2055.732000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2055.732000] ata2.00: cmd 35/00:00:8f:72:10/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2055.732000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2055.732000] ata2: soft resetting port
    [ 2055.944000] ata2.00: configured for UDMA/33
    [ 2055.944000] ata2: EH complete
    [ 2055.948000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2055.948000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2055.948000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2055.952000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2086.032000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2086.032000] ata2.00: cmd 35/00:00:9f:aa:10/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2086.032000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2086.032000] ata2: soft resetting port
    [ 2086.224000] ata2.00: configured for UDMA/33
    [ 2086.224000] ata2: EH complete
    [ 2086.228000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2086.228000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2086.228000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2086.232000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2116.424000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2116.424000] ata2.00: cmd 35/00:00:b7:06:11/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2116.424000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2116.424000] ata2: soft resetting port
    [ 2116.612000] ata2.00: configured for UDMA/33
    [ 2116.612000] ata2: EH complete
    [ 2116.616000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2116.616000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2116.616000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2116.620000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2146.812000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2146.812000] ata2.00: cmd 35/00:00:57:6c:11/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2146.812000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2146.812000] ata2: soft resetting port
    [ 2147.032000] ata2.00: configured for UDMA/33
    [ 2147.032000] ata2: EH complete
    [ 2147.036000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2147.036000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2147.036000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2147.040000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2177.220000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2177.220000] ata2.00: cmd 35/00:00:af:cc:11/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2177.220000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2177.220000] ata2: soft resetting port
    [ 2177.424000] ata2.00: configured for UDMA/33
    [ 2177.424000] ata2: EH complete
    [ 2177.428000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2177.428000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2177.428000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2177.432000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2213.260000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2213.260000] ata2.00: cmd 35/00:00:af:0b:13/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2213.260000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2213.260000] ata2: soft resetting port
    [ 2213.472000] ata2.00: configured for UDMA/33
    [ 2213.472000] ata2: EH complete
    [ 2213.476000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2213.476000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2213.476000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2213.480000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2243.576000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2243.576000] ata2.00: cmd 35/00:40:8f:33:13/00:01:12:00:00/e0 tag 0 cdb 0x0 data 163840 out
    [ 2243.576000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2243.576000] ata2: soft resetting port
    [ 2243.768000] ata2.00: configured for UDMA/33
    [ 2243.768000] ata2: EH complete
    [ 2243.768000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2243.768000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2243.768000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2243.768000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2273.824000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2273.824000] ata2.00: cmd 35/00:00:2f:ab:13/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2273.824000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2273.824000] ata2: soft resetting port
    [ 2274.028000] ata2.00: configured for UDMA/33
    [ 2274.028000] ata2: EH complete
    [ 2274.032000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2274.032000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2274.032000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2274.040000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2304.104000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2304.104000] ata2.00: cmd 35/00:00:3f:db:13/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2304.104000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2304.104000] ata2: soft resetting port
    [ 2304.304000] ata2.00: configured for UDMA/33
    [ 2304.304000] ata2: EH complete
    [ 2304.308000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2304.308000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2304.308000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2304.312000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2334.460000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2334.460000] ata2.00: cmd 35/00:00:97:33:14/00:04:12:00:00/e0 tag 0 cdb 0x0 data 524288 out
    [ 2334.460000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2334.460000] ata2: soft resetting port
    [ 2334.660000] ata2.00: configured for UDMA/33
    [ 2334.660000] ata2: EH complete
    [ 2334.664000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2334.664000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2334.664000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2334.668000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2923.000000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2923.000000] ata2.00: cmd ca/00:20:9f:24:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 16384 out
    [ 2923.000000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2923.000000] ata2: soft resetting port
    [ 2923.200000] ata2.00: configured for UDMA/33
    [ 2923.200000] ata2: EH complete
    [ 2923.200000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2923.204000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2923.204000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2923.212000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2958.148000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2958.148000] ata2.00: cmd c8/00:08:7f:98:df/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
    [ 2958.148000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2958.148000] ata2: soft resetting port
    [ 2958.352000] ata2.00: configured for UDMA/33
    [ 2958.352000] ata2: EH complete
    [ 2958.360000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2958.368000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2958.368000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2958.368000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2959.356000] UDF-fs: No VRS found
    [ 2959.428000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 2959.468000] ISOFS: changing to secondary root
    [ 2993.988000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 2993.988000] ata2.00: cmd ca/00:08:57:46:1e/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
    [ 2993.988000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 2993.988000] ata2: soft resetting port
    [ 2994.180000] ata2.00: configured for UDMA/33
    [ 2994.180000] ata2: EH complete
    [ 2994.180000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 2994.180000] sd 1:0:0:0: [sda] Write Protect is off
    [ 2994.180000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2994.180000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3386.684000] iptables denied: IN=eth0 OUT= MAC=00:19:d1:ac:a1:46:00:1b:57:95:a1:6c:08:00 SRC=62.73.58.149 DST=192.168.1.2 LEN=52 TOS=0x00 PREC=0x20 TTL=45 ID=42757 DF PROTO=TCP SPT=80 DPT=58092 WINDOW=54 RES=0x00 ACK URGP=0 
    [ 4745.452000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 4745.492000] ISOFS: changing to secondary root
    [ 4772.984000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 4772.984000] ata2.00: cmd c8/00:08:37:d4:ff/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 in
    [ 4772.984000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 4772.984000] ata2: soft resetting port
    [ 4773.160000] ata2.00: configured for UDMA/33
    [ 4773.160000] ata2: EH complete
    [ 4773.188000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 4773.204000] sd 1:0:0:0: [sda] Write Protect is off
    [ 4773.204000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 4773.228000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 4804.312000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 4804.312000] ata2.00: cmd ca/00:08:27:28:1d/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
    [ 4804.312000]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 4804.312000] ata2: soft resetting port
    [ 4804.508000] ata2.00: configured for UDMA/33
    [ 4804.508000] ata2: EH complete
    [ 4804.508000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 4804.508000] sd 1:0:0:0: [sda] Write Protect is off
    [ 4804.508000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 4804.508000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 4951.780000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
    [ 4951.780000] ata2.00: (BMDMA stat 0x26)
    [ 4951.780000] ata2.00: cmd ca/00:10:df:76:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 8192 out
    [ 4951.780000]          res 51/84:01:01:00:00/00:00:00:00:00/00 Emask 0x30 (host bus error)
    [ 4951.780000] ata2: soft resetting port
    [ 4951.984000] ata2.00: configured for UDMA/33
    [ 4951.984000] ata2: EH complete
    [ 4951.984000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 4951.984000] sd 1:0:0:0: [sda] Write Protect is off
    [ 4951.984000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 4951.984000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 4982.948000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 4982.948000] ata2.00: cmd ca/00:08:5f:58:c2/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 out
    [ 4982.948000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 4982.948000] ata2: soft resetting port
    [ 4983.144000] ata2.00: configured for UDMA/33
    [ 4983.144000] ata2: EH complete
    [ 4983.144000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 4983.144000] sd 1:0:0:0: [sda] Write Protect is off
    [ 4983.144000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 4983.144000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5014.316000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 5014.316000] ata2.00: cmd ca/00:08:d7:d4:c2/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 out
    [ 5014.316000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 5014.316000] ata2: soft resetting port
    [ 5014.524000] ata2.00: configured for UDMA/33
    [ 5014.524000] ata2: EH complete
    [ 5014.524000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 5014.524000] sd 1:0:0:0: [sda] Write Protect is off
    [ 5014.524000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5014.524000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5049.988000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 5049.988000] ata2.00: cmd ca/00:08:47:a9:ba/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
    [ 5049.988000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 5049.988000] ata2: soft resetting port
    [ 5050.200000] ata2.00: configured for UDMA/33
    [ 5050.200000] ata2: EH complete
    [ 5050.200000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 5050.200000] sd 1:0:0:0: [sda] Write Protect is off
    [ 5050.200000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5050.200000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5508.524000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 5508.524000] ata2.00: cmd ca/00:08:cf:54:c2/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 out
    [ 5508.524000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 5508.524000] ata2: soft resetting port
    [ 5508.724000] ata2.00: configured for UDMA/33
    [ 5508.724000] ata2: EH complete
    [ 5508.724000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 5508.724000] sd 1:0:0:0: [sda] Write Protect is off
    [ 5508.724000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5508.724000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5511.524000] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 5511.564000] ISOFS: changing to secondary root
    [ 5561.776000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
    [ 5561.776000] ata2.00: cmd c8/00:08:67:dc:fc/00:00:00:00:00/ec tag 0 cdb 0x0 data 4096 in
    [ 5561.776000]          res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 5561.776000] ata2: soft resetting port
    [ 5561.968000] ata2.00: configured for UDMA/33
    [ 5561.968000] ata2: EH complete
    [ 5561.984000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [ 5561.984000] sd 1:0:0:0: [sda] Write Protect is off
    [ 5561.984000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5561.988000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 25 20:36:56 jantar kernel: [ 6851.340000] ata2.00: (BMDMA stat 0x24)
    Apr 25 20:36:56 jantar kernel: [ 6851.340000] ata2.00: cmd c8/00:08:e8:69:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
    Apr 25 20:36:56 jantar kernel: [ 6851.340000]          res 51/40:00:e8:69:01/00:00:00:00:00/e0 Emask 0x9 (media error)
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] ata2.00: configured for UDMA/33
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] Descriptor sense data with sense descriptors (in hex):
    Apr 25 20:36:56 jantar kernel: [ 6851.364000]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    Apr 25 20:36:56 jantar kernel: [ 6851.364000]         00 01 69 e8
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] end_request: I/O error, dev sda, sector 92648
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] Buffer I/O error on device sda, logical block 11581
    Apr 25 20:36:56 jantar kernel: [ 6851.364000] ata2: EH complete
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Write Protect is off
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Write Protect is off
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Apr 25 20:36:56 jantar kernel: [ 6851.368000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    hdparm returned:

    Code:
    imran@jantar:~$ sudo hdparm -t /dev/sda
    
    /dev/sda:
     Timing buffered disk reads:  read(2097152) returned 1298432 bytes
    Thanks
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  3. #3
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    Sorry I forgot to mention this:

    Code:
    imran@jantar:~$ sudo sdparm -a /dev/sda
        /dev/sda: ATA       WDC WD3200AAJS-0  01.0
    Read write error recovery mode page:
      AWRE        1
      ARRE        1
      TB          0
      RC          0
      EER         0
      PER         0
      DTE         0
      DCR         0
      RRC         0
      COR_S       0
      HOC         0
      DSOC        0
      WRC         0
      RTL         0
    Caching (SBC) mode page:
      IC          0
      ABPF        0
      CAP         0
      DISC        0
      SIZE        0
      WCE         1
      MF          0
      RCD         0
      DRRP        0
      WRP         0
      DPTL        0
      MIPF        0
      MAPF        0
      MAPFC       0
      FSW         0
      LBCSS       0
      DRA         0
      NV_DIS      0
      NCS         0
      CSS         0
    Control mode page:
      TST         0
      TMF_ONLY    0
      D_SENSE     0
      GLTSD       1
      RLEC        0
      QAM         0
      QERR        0
      RAC         0
      UA_INTLCK   0
      SWP         0
      ATO         0
      TAS         0
      AUTOLOAD    0
      BTP        -1
      ESTCT      30
    I'm bit suspicous why my SATA disk is showing as ATA here, is there anything in bios I need to change?

    Also, my lspci:

    Code:
    imran@jantar:~$ lspci
    00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02)
    00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02)
    00:19.0 Ethernet controller: Intel Corporation 82801I (ICH9 Family) Gigabit Ethernet Controller (rev 02)
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
    00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
    00:1f.0 ISA bridge: Intel Corporation 82801IH (ICH9DH) LPC Interface Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
    00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
    02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b1)
    06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  4. $spacer_open
    $spacer_close
  5. #4
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    Lets see if anything useful comes from these commands, please.
    Code:
    sudo apt-get install smartmontools
    Code:
    sudo smartctl -a /dev/sda
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  6. #5
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    Here it is:
    Code:
    smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
    Home page is http://smartmontools.sourceforge.net/
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD3200AAJS-00YZCA0
    Serial Number:    WD-WCAYU1604715
    Firmware Version: 01.03B01
    User Capacity:    320,072,933,376 bytes
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   8
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Sun Apr 25 23:16:08 2010 IST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x84) Offline data collection activity
                                            was suspended by an interrupting command from host.
                                            Auto Offline Data Collection: Enabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                                            without error or no self-test has ever
                                            been run.
    Total time to complete Offline
    data collection:                 (6000) seconds.
    Offline data collection
    capabilities:                    (0x7b) SMART execute Offline immediate.
                                            Auto Offline data collection on/off support.
                                            Suspend Offline collection upon new
                                            command.
                                            Offline surface scan supported.
                                            Self-test supported.
                                            Conveyance Self-test supported.
                                            Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                                            power-saving mode.
                                            Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                                            General Purpose Logging supported.
    Short self-test routine
    recommended polling time:        (   2) minutes.
    Extended self-test routine
    recommended polling time:        (  73) minutes.
    Conveyance self-test routine
    recommended polling time:        (   5) minutes.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       2
      3 Spin_Up_Time            0x0027   186   138   021    Pre-fail  Always       -       1691
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       211
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       156
     10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       209
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       166
    193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       44
    194 Temperature_Celsius     0x0022   101   090   000    Old_age   Always       -       42
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       43
    198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       12
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       12
    
    SMART Error Log Version: 1
    ATA Error Count: 84 (device log contains only the most recent five errors)
            CR = Command Register [HEX]
            FR = Features Register [HEX]
            SC = Sector Count Register [HEX]
            SN = Sector Number Register [HEX]
            CL = Cylinder Low Register [HEX]
            CH = Cylinder High Register [HEX]
            DH = Device/Head Register [HEX]
            DC = Device Command Register [HEX]
            ER = Error register [HEX]
            ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    
    Error 84 occurred at disk power-on lifetime: 156 hours (6 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 e8 69 01 e0  Error: UNC 8 sectors at LBA = 0x000169e8 = 92648
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e8 69 01 e0 08      00:21:55.709  READ DMA
      ec 00 00 00 00 00 a0 08      00:21:55.700  IDENTIFY DEVICE
      ef 03 42 00 00 00 a0 08      00:21:55.693  SET FEATURES [Set transfer mode]
    
    Error 83 occurred at disk power-on lifetime: 156 hours (6 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 e8 69 01 e0  Error: UNC 8 sectors at LBA = 0x000169e8 = 92648
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e8 69 01 e0 08      00:21:53.915  READ DMA
      ec 00 00 00 00 00 a0 08      00:21:53.909  IDENTIFY DEVICE
      ef 03 42 00 00 00 a0 08      00:21:53.899  SET FEATURES [Set transfer mode]
    
    Error 82 occurred at disk power-on lifetime: 156 hours (6 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 e8 69 01 e0  Error: UNC 8 sectors at LBA = 0x000169e8 = 92648
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e8 69 01 e0 08      00:21:52.117  READ DMA
      ec 00 00 00 00 00 a0 08      00:21:52.108  IDENTIFY DEVICE
      ef 03 42 00 00 00 a0 08      00:21:52.101  SET FEATURES [Set transfer mode]
    
    Error 81 occurred at disk power-on lifetime: 156 hours (6 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 e8 69 01 e0  Error: UNC 8 sectors at LBA = 0x000169e8 = 92648
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e8 69 01 e0 08      00:21:50.319  READ DMA
      ec 00 00 00 00 00 a0 08      00:21:50.310  IDENTIFY DEVICE
      ef 03 42 00 00 00 a0 08      00:21:50.303  SET FEATURES [Set transfer mode]
    
    Error 80 occurred at disk power-on lifetime: 156 hours (6 days + 12 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 08 e8 69 01 e0  Error: UNC 8 sectors at LBA = 0x000169e8 = 92648
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      c8 00 08 e8 69 01 e0 08      00:21:48.508  READ DMA
      ec 00 00 00 00 00 a0 08      00:21:48.500  IDENTIFY DEVICE
      ef 03 42 00 00 00 a0 08      00:21:48.494  SET FEATURES [Set transfer mode]
    
    SMART Self-test log structure revision number 1
    No self-tests have been logged.  [To run self-tests, use: smartctl -t]
    
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    Thanks
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  7. #6
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    Something unusual happening here. From my System Settings many things are missing now. Like, in regional language settings, I don't see any Keyboard Layout. Or in the network section I don't see the window where the my eth0 interface is shown. I don't know how they can vanish by part...
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  8. #7
    Administrator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,864
    It could be that your hard drive is failing, have you been experiencing random reboot/shutdowns or just system errors in general? I would advise a backup solution for all your important files before proceeding further...you just never know.

    Try smart self tests, here is a link for more info on SMART.
    Monitoring Hard Disks with SMART | Linux Journal
    Code:
    sudo smartctl -t /dev/sda
    Boot a LiveCD and fsck the whole (unmounted) disk.
    Code:
    fsck -aV /dev/sda1
    fsck -aV /dev/sda2
    And so on, until you check all partitions.
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.

    I'd rather be lost at the lake than found at home.

  9. #8
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    No reboot or shutdowns, only these messages coming, and I think the culprit is these upgrades that I have done. I bought the harddisk just 3 weeks back, and already 2 hard disk crashed on this kubuntu 7.10. I don't know if this 7.10 kubuntu has some major problem with hardware compatibility or not.

    And can somebody tell why so many setting options are now missing from System Settings? Like keyboard layout, like eth0 configuration etc.

    Please advise me, I am thinking of removing kubuntu 7.10, but want to keep kde (and not kde 4x), so which distro will be best suitable for me? I am thinking of debian.
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  10. #9
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    Here it says ata 4.00 is the dvd drive not the hard disk. is that correct?
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

  11. #10
    Linux Newbie imranka's Avatar
    Join Date
    Dec 2007
    Location
    Kolkata
    Posts
    181
    fsck from livecd gives this:
    Code:
    ubuntu@ubuntu:~$ sudo fsck -aV /dev/sda1
    fsck 1.40.2 (12-Jul-2007)
    [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a /dev/sda1
    /dev/sda1: clean, 125740/2501856 files, 863327/5000223 blocks
    ubuntu@ubuntu:~$ sudo fsck -aV /dev/sda5
    fsck 1.40.2 (12-Jul-2007)
    [/sbin/fsck.ext3 (1) -- /dev/sda5] fsck.ext3 -a /dev/sda5
    /dev/sda5: clean, 53444/36519936 files, 12374851/73017425 blocks
    Imran
    Linux User #467555 | Debian Squeeze | Intel(R) Core(TM)2 Duo CPU 4500 @ 2.20GHz | Gigabyte GA-G41MT-ES2L
    | 2 GB RAM | 320 GB SATA | Kernel: 2.6.32-5-686

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •