Find the answer to your Linux question:
Results 1 to 6 of 6
I found this when I booted up. What is the error about? Do I need to be concerned about this? 0.327904] pci 0000:01:00.0: BAR 6: no parent found for of ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Linux Newbie
    Join Date
    Dec 2008
    Posts
    163

    Error message on boot


    I found this when I booted up. What is the error about? Do I need to be concerned about this?

    0.327904] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8000ffff]
    [ 0.327993] pci 0000:02:08.0: BAR 6: address space collision on of device [0xfe200000-0xfe23ffff]
    Thanks

  2. #2
    Linux Guru Rubberman's Avatar
    Join Date
    Apr 2009
    Location
    I can be found either 40 miles west of Chicago, or in a galaxy far, far away.
    Posts
    11,168
    Good question as to being concerned. The second line indicates that whatever device it is referring to, it conflicts with some other board/device in the system. If you can boot up, run this command from a terminal window and post the output here: lspci
    Sometimes, real fast is almost as good as real time.
    Just remember, Semper Gumbi - always be flexible!

  3. #3
    Linux Newbie
    Join Date
    Dec 2008
    Posts
    163
    Code:
    joe@Debian:~$ lspci
    00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)                               
    00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01)                                                
    00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)                                
    00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)                                
    00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)                                
    00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)                                             
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)                                                                               
    00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)                                                 
    00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)                                                               
    00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)                                               
    00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)                   
    01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15)                                                           
    02:08.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 25)

  4. #4
    Linux Guru Rubberman's Avatar
    Join Date
    Apr 2009
    Location
    I can be found either 40 miles west of Chicago, or in a galaxy far, far away.
    Posts
    11,168
    01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15)
    02:08.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 25)
    Well, these are the two devices that the system is complaining about - the video and the network board. Are they add-in devices - or built into the mobo?
    Sometimes, real fast is almost as good as real time.
    Just remember, Semper Gumbi - always be flexible!

  5. #5
    Linux Newbie
    Join Date
    Dec 2008
    Posts
    163
    They are both add-in devices. I haven't installed the nvidia driver for the video yet.

  6. #6
    Just Joined!
    Join Date
    Oct 2011
    Posts
    1
    Rubberman, I have the same message, I already know the device my Debian squeeze is complaining about, but we need to know what to do for that messages dissapear.
    My problem was that in the board pci port I had a network card realtek and I changed for an intel, and now I received the message at the beginning of boot.
    Please, advice what to do.
    Thanks in advance,
    Hector.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •