[SOLVED] nvidia not working

[zetrotrack000]

Kindly replace [dot] with .
As I am not able to post links

Hi
I have reinstalled bodhi linux because of some reasons. After fresh install, now bodhi is running X in 800x600 resolution. I want 1024x768 resolution so I installed nvidia driver. My nvidia card is nvidia GeForce 7050/nForce 610i. I followed the following guide to install nvidia driver;
wiki[dot]bodhilin...u.php?id=nvidia
I used the Manual Installation method. After the installation, I used the following xorg.conf file which I have saved form my previous installation and was working very well;
pastebin[dot]com/z1H1Tj5N
Previously, this xorg.conf was working well but now with this xorg.conf file my pc freezes while loading X and I have to press power button to turn it off.

Can anyone tell me that is there anything wrong with this xorg.conf file
or
How can I get 1024x768 resolution?

PS: As always, I used the nvidia-current dirver while installation. My kernel is 3.0.0-9-generic
Here is the output of /var/log/Xorg.0.log
pastebin[dot]com/PQb51SUc

Please let me know I you need any other information.

Regards

[MikeTbob]

[ 15.281] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)

Are you sure you got the correct driver installed? Was/is the Nouveau driver installed? If yes, then you need to blacklist that before the Nvidia driver will work.

Open /etc/modprobe.d/blacklist.conf
Add

blacklist nouveau

Save and exit. Reinstall the Nvidia driver and reboot

[Rubberman]

As MikeTbob says. Also, the current xorg servers do not need the xorg.conf files as they will interrogate the hardware on boot to see what they need to know. I assume you have a fairly recent display - if not then you may need to manually configure your xorg.conf file.

[zetrotrack000]

I tried removing xorg.conf and also blocking nouveau but X freezes while loading.
After removing xorg.conf then I can not get 1024x768 resolution. I am on 800x600

[zetrotrack000]

Problem solved

I used the following xorg.conf and problem gone...

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30-50
VertRefresh 50-120

EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

[MikeTbob]

Problem solved

I used the following xorg.conf and problem gone...

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
HorizSync 30-50
VertRefresh 50-120

EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Very nice, and good job. Thanks for posting your solution also....it'll come in handy for others.