Results 1 to 2 of 2
I'm having a problem getting a DVD writer working in Linux. Here is my dvdrecord output: Code: root@bubbles:/temp# dvdrecord dev=1,0,0 speed=2 -dao dvdtest.iso dvdrtools v0.2.1 Portions (C) 2002-2005 Ark Linux ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 04-27-2005 #1
- Join Date
- Jan 2004
Problem with DVD Writer in Linux
root@bubbles:/temp# dvdrecord dev=1,0,0 speed=2 -dao dvdtest.iso dvdrtools v0.2.1 Portions (C) 2002-2005 Ark Linux <email@example.com> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.31 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-4081B' Revision : 'A100' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Starting to write CD/DVD at speed 2 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. trackno=1 dvdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 04 0D 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 0D 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 10 00 00 00 0D 00 00 00 00 00 00
- 04-29-2005 #2
- Join Date
- Jan 2004
So no ideas about this?