Results 1 to 1 of 1
Hi all, I am having difficulty to setup the connection from my Linux to communicate with Ms-Windows via a " serial port ". what i have done is: Type of ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
- 04-30-2005 #1
- Join Date
- Mar 2005
Ms-windows to linux via serial port
I am having difficulty to setup the connection from my Linux to communicate with Ms-Windows via a " serial port ". what i have done is:
Type of cable: NULL CABLE
* setup a linux virtual terminal to accepting connection from serial port ttyS1 here is my "/etc/initab" look like.
s2:123456:respawn:/sbin/agetty -L ttyS1 -f /etc/issue 9600 vt100
root%:dmesg | grep tty*
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
* The same in Ms-windows, I am using Hyperterm to establish the connection corresponding to the ports and terminal setup in linux.
Configure: VT100 9600-8-N-1
here is what happened when i connected them together:
I recieved the linux's login prompt on windows hyperterm. But then as soon as I type in my username and press enter. The Hyperterm is freezing up. I got absolutly no responding back after that. What did I do wrong?.
I am very desperate to get this working. Can someone please point out any solution for this issue , I would be very apperciated.
Once again Many thanks for your help.