Huawei ETS2077 Fixed Wireless Terminal

[rodi]

I instaled ubuntu 6.06 end i have some problem with Huawei ETS 2077.For ubuntu 6.06 the kernel is 2.6.15.26.;i instaled Gnome ppp but i don't know how to do this conection.Please somebody give me more clear details.I read what other said but i wish more detailes for my case(ubuntu 6.06)-i am a beginer in linux end i need some explanations like this:"first you open the console,write this line: ....)

P.S.Escuse me my english!

[olivierCLEODE]

Hello,

I try to install the TUSB3410 converter usb serial on Linux 2.6.11.7 and Linux recognize the device but don't attach it to ttyUSB0.

I put the firmware in the path : /etc/hotplug/usb/ti_usb_3410_5052 because we use hotplug.

When i connect it, i have this result:

hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
ocp-ohci 02: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ocp-ohci 02: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 1-1: new full speed USB device using ocp-ohci and address 5
ocp-ohci 02: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
usb 1-1: ep0 maxpacket = 8
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: default language 0x0409
usb 1-1: Product: TUSB3410UART EVM
usb 1-1: Manufacturer: Texas Instruments
usb 1-1: SerialNumber: 00000231
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002


I test an other device, the Prolific PL2103 and Linux recognize and attach it to ttyUSB0.


usb 1-1: Product: USB-Serial Controller
usb 1-1: Manufacturer: Prolific Technology Inc.
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
pl2303 1-1:1.0: usb_probe_interface
usb_probe_interface
pl2303 1-1:1.0: usb_probe_interface - got id
drivers/usb/serial/usb-serial.c: 1) usb_serial_probe
drivers/usb/serial/usb-serial.c: descriptor matches
drivers/usb/serial/usb-serial.c: found interrupt in on endpoint 0
drivers/usb/serial/usb-serial.c: found bulk out on endpoint 1
drivers/usb/serial/usb-serial.c: found bulk in on endpoint 2
pl2303 1-1:1.0: PL-2303 converter detected
drivers/usb/serial/usb-serial.c: get_free_serial 1
drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
drivers/usb/serial/usb-serial.c: usb_serial_probe - setting up 1 port structures
for this device
drivers/usb/serial/pl2303.c: device type: 2
drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
usb 1-1: PL-2303 converter now attached to ttyUSB0
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002

I think i have a problem with hotplug.

Can you help me.

Thanks.

[wasubire]

Kalpa Pathum Welivitigoda try this blog it will definately work with ubuntu you dont need to install anything

[Ajit456]

Visit this page for detailed step instructions on installing huawei modem in linux:
Setting dial-up internet in Linux using Huawei CDMA