Results 1 to 2 of 2
|
Enjoy an ad free experience by logging in. Not a member yet? Register.
|
|
-
11-30-2005 #1
- Join Date
- Nov 2005
- Posts
- 5
problem with tv board hauppauge pci
I'm trying to install tv hauppauge pci-fm
I know that is using bt878 card=10 and tuner philips type=5 PAL-BG
0000:02:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Hauppauge WinTV 34xxx models
Flags: medium devsel, IRQ 10
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <available only to root>
ema@1[~]$ lsmod | grep bttv
bttv 142608 0
i2c_algo_bit 8584 1 bttv
video_buf 17028 1 bttv
tveeprom 11672 1 bttv
v4l2_common 4864 1 bttv
btcx_risc 3976 1 bttv
videodev 7424 1 bttv
i2c_core 17424 8 bttv,tuner,tvmixer,msp3400,tda9887,i2c_algo_bit,tv eeprom,i2c_i801
I used modconf to load all modules but still i see a blue screen for any client such like xawtv,tvtime or kdetv
it's quite strange,i used a miro before under mandrake and debian with no problem..
is there a how-to somewhere maybe?
Thanks a lot
ema
-
12-01-2005 #2
- Join Date
- Dec 2004
- Location
- Rockin' in the USA!!!
- Posts
- 603
try doing 'cat /dev/video*' to see if maybe it's occupying a different device node, be ready with the Ctrl+C though