What? Help! My hardware not working

[MaxiServer]

PLease help me this morning mandriva was working fine it was working fine. I turn the COmputer off. And in the afternoon when i turn it on again the monitore wasnot reacting and the mouse and keyborde werent either working. I check that everything was plugged in properly. PLeeaaaaaaasssssssseeeeeeee HHHHHHHHHHEeeeeeeeeelllllllllppppppppp!!!!! MEeeeeeee

[Vergil83]

ok, in order to help you, we need actual information.

Does the bios come up?
Is your bootloader starting?
Is the problem after linux starts?
etc........

[MaxiServer]

Ok, when i push the button to turn on the computer, the actual computer turns on but the monitore and mouse and keybord doesent react. So i just have a blank screen. I tried a diifferent screen but the same thing happend. I even tried to put in a second visual card, but still it didnt help.

Is that better?

[deltaflyer]

sosunds like a hardware problem, try having just the minimal kit in your p.c. e.g. memory,graphics,cpu & see if it boots. if it does, gradually add to it until you find the part that stops it booting. somtimes just taking out components & resating them works.

andy

[Game master pro]

ok, in order to help you, we need actual information...

^^
That's so funny for some reason, sigged



And it sounds to me that you have a buggered power supply, they do that after a while, how old is the computer?

[Vergil83]

Also, some motherboard use a series of beeps to indicate problems (one beep = bad memory, two beeps = no video card, etc... ) look in your information about your motherboard

ok, in order to help you, we need actual information...

^^
That's so funny for some reason, sigged

Thank You

[reachajay1]

Why not try Clearing the Cmos Settings of your PC by removing the Cmos Battery from its Socket and inserting a new battery.


Pls. Do reply