I set up lm-sensors on one of my servers to monitor temperature. I compiled a kernel with the necessary bits and when I enter the command sensors I get some information about the current state of temperature and voltage from the motherboard's chipset.

When I type sensors it seems to indicate that something may be wrong.
Code:
# sensors
w83627hf-isa-0290
Adapter: ISA adapter
VCore 1:   +0.00 V  (min =  +1.54 V, max =  +1.95 V)       ALARM  
VCore 2:   +1.47 V  (min =  +1.54 V, max =  +1.95 V)       ALARM  
+3.3V:     +3.33 V  (min =  +2.82 V, max =  +3.79 V)              
+5V:       +5.11 V  (min =  +0.24 V, max =  +0.19 V)       ALARM  
+12V:      +4.92 V  (min =  +4.50 V, max =  +4.74 V)       ALARM  
-12V:      -1.42 V  (min = -13.43 V, max =  -5.12 V)       ALARM  
-5V:       -3.64 V  (min =  +2.29 V, max =  +3.04 V)       ALARM  
V5SB:      +5.62 V  (min =  +0.67 V, max =  +4.41 V)       ALARM  
VBat:      +1.04 V  (min =  +1.73 V, max =  +1.06 V)       ALARM  
fan1:        0 RPM  (min =    0 RPM, div = 8)                     
fan2:     3308 RPM  (min =    0 RPM, div = 8)                     
fan3:        0 RPM  (min =    0 RPM, div = 8)                     
temp1:       +35 C  (high =    +4 C, hyst =   +41 C)   sensor = thermistor           
temp2:     +34.5 C  (high =   +80 C, hyst =   +75 C)   sensor = thermistor           
temp3:     +40.5 C  (high =   +80 C, hyst =   +75 C)   sensor = thermistor           
vid:      +1.400 V  (VRM Version 2.4)
alarms:   
beep_enable:
          Sound alarm enabled
Is it normal to see ALARM next to everything? Do I have a problem?