ALSA Config Help

[cdfusion]

Hey I deciced to switch to Mandrake 10.0 and once again the only problem I have is sound except this time ALSA's config program will work, and the module will start with no problems.

but at the end of the conf file i get this

saving the mixer setup used for this in /etc/asound.state.
/usr/sbin/alsactl: save_state:1061: No soundcards found...

and I still wont get anysound.... could some one plez help me

Also when running alsamixer iget this
[eric@localhost eric]$ alsamixer

alsamixer: function snd_ctl_open failed for default: No such device

[jasonlambert]

can you paste the output of "lspci"?

Thanks,

Jason

[cdfusion]

[eric@localhost wine-20040309]$ /sbin/lsmod
Module Size Used by
sg 38044 0
sr_mod 17060 0
nfsd 173152 8
exportfs 5920 1 nfsd
lp 12200 0
md5 3872 1
ipv6 232352 12
snd-seq-oss 31232 0
snd-seq-midi-event 7552 1 snd-seq-oss
snd-seq 51024 4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 51812 0
snd-mixer-oss 17952 1 snd-pcm-oss
snd-intel8x0 32776 0
snd-ac97-codec 58148 1 snd-intel8x0
snd-pcm 93156 2 snd-pcm-oss,snd-intel8x0
snd-timer 24484 2 snd-seq,snd-pcm
gameport 4480 1 snd-intel8x0
snd-page-alloc 11972 2 snd-intel8x0,snd-pcm
snd-mpu401-uart 7072 1 snd-intel8x0
snd-rawmidi 23616 1 snd-mpu401-uart
snd-seq-device 8008 3 snd-seq-oss,snd-seq,snd-rawmidi
snd 52484 12 snd-seq-oss,snd-seq-midi-event,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore 9248 1 snd
af_packet 20520 2
hid 53312 0
raw 7616 1
ide-floppy 18752 0
ide-tape 34864 0
ide-cd 40548 1
cdrom 37184 2 sr_mod,ide-cd
floppy 59444 0
forcedeth 14304 0
nls_iso8859-1 3904 1
ntfs 85932 1
supermount 37876 1
ppa 12296 0
parport_pc 32832 1
imm 12360 0
scsi_mod 114744 4 sg,sr_mod,ppa,imm
parport 38952 4 lp,ppa,parport_pc,imm
ehci-hcd 24196 0
ohci-hcd 18692 0
usbcore 99132 4 hid,ehci-hcd,ohci-hcd
rtc 11576 0
ext3 110376 6
jbd 54328 1 ext3

[jasonlambert]

That was "lsmod", can we have "lspci" please

Cheers,

Jason

[cdfusion]

[eric@localhost eric]$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev a2)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)
01:08.0 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)

^lspci