-
Gateway FHD2400
Anyone using one of these monitors? I just bought one and I'm not seeing the text as clear as I thought I would. Maybe it's just my eyes, not sure. I'm running it at full 1900x1200 with a Nvidia FX5500 card. I installed the Nvidia driver using Nvidia's bin file. I have looked at the Nvidia X Server Setting but don't know what I could tune to see if the text comes in clear. Any help would be a big plus. Even if I should be looking at something else.
Also I have the problem that when starting X it starts in 1600x1200 instead of 1900x1200. :confused:
Here is my xorg.cfg:
Code:
~ $ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Thu Dec 13 19:10:32 PST 2007
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Gateway FHD2400"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5500"
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT: 1920x1200 +0+0; CRT: 1400x1050 +0+0; CRT: 1280x1024 +0+0; CRT: 1280x960 +0+0;CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1920x1200 +0+0; CRT: 1400x1050 +0+0; CRT: 1280x1024 +0+0; CRT: 1280x960 +0+0; CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Searched some on the web but didn't find anything.
Any help would be appreciated.
