SiliconImage Sata controller works in 2.4 but not 2.6 kernel
I'm recompiling a kernel for an old server and have compiled in the driver for the Silicon Image Sata controller card into the kernel. The older 2.4 kernel works fine and finds 4 disks, but the newer 2.6 kernel doesn't find anything.
The card is shown by lspci:
I've compiled in to the kernel:
03:03.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02)
Why doesn't it work!!!!!
ATA/ATAPI/MFM/RLL support --->
<*> Silicon Image chipset support
SCSI device support --->
<*> SCSI disk support
<*> SCSI generic support
SCSI low-level drivers --->
<*> Serial ATA (SATA) support
<*> Silicon Image SATA support
<*> Silicon Image 3124/3132 SATA support