usb flash drive trouble, with complex drive layout
I am having trouble getting my usb flash drive working. I have used it on a Linux before, but my problem here is with the Mother board, or configuration.
I am running a an Asus A8NSLI Delux,
It has two sata controllers, one nvidia and one silicon image
I have the nvidia controller configured to act as a standard sata controller
with all 4 ports acting as hard drive ports with one 250 GB drive on sata1
I have the silicon image controller configured as a raid device with two
raptors set up in a raid 0.
Finally I am running my slack 10.2 from the on board pata 1 controller
Now here is the kicker. How the heck to figure out where to mount the flash drive. I know nix sees the sata drives as scsi devices, and I have tried to simply count the drives and then move on to the next drive, to no avail.
any help would be great.