Find the answer to your Linux question:
Results 1 to 2 of 2
hi all. i have been struggling with this for the last two days, and I was hoping someone might be able to point me in the right direction. i have ...
Enjoy an ad free experience by logging in. Not a member yet? Register.
  1. #1
    Just Joined!
    Join Date
    Sep 2004
    Posts
    2

    intel i875 ICH5 not detecting my cdrom


    hi all. i have been struggling with this for the last two days, and I was hoping someone might be able to point me in the right direction.

    i have a Asus pc-dl mobo running 2.6.8.1 smp. it has the ich5 southbridge controller giving it sata, pata, and raid functions. I have my bios in "combine" mode, which apparently maps all the drives (sata/pata) to primary/secondary master/slave which worked fine for installing debian. but now that the system is up and running, my cdrom drive isn't accessable anywhere i can find.

    the dmesg (attached below) seems to have recognized it (search for PATA), but i cannot mount anything that is it (ie /dev/cdrom, /dev/hdc, /dec/scd0, nothing).

    inspected /proc/scsi section show only my primary hdd (attached as sata) and my two other scsi drives on my promise controller. /proc/ide doesn't show anything except a drivers file saying ide-cdrom is loaded.

    any help anyone can give would be great! thanks a lot.

    eric

    --

    fter generic identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
    CPU: Trace cache: 12K uops, L1 D cache: 8K
    CPU: L2 cache: 512K
    CPU: Physical Processor ID: 3
    CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
    CPU3: Thermal monitoring enabled
    CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 07
    Total of 4 processors activated (24494.08 BogoMIPS).
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 4-0, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 3073.0157 MHz.
    ..... host bus clock speed is 133.0615 MHz.
    checking TSC synchronization across 4 CPUs: passed.
    Brought up 4 CPUs
    CPU0: online
    domain 0: span 03
    groups: 01 02
    domain 1: span 0f
    groups: 03 0c
    CPU1: online
    domain 0: span 03
    groups: 02 01
    domain 1: span 0f
    groups: 03 0c
    CPU2: online
    domain 0: span 0c
    groups: 04 08
    domain 1: span 0f
    groups: 0c 03
    CPU3: online
    domain 0: span 0c
    groups: 08 04
    domain 1: span 0f
    groups: 0c 03
    checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
    Freeing initrd memory: 4480k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfbac0, last bus=3
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20040326
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    PnPBIOS: Scanning system for PnP BIOS support...
    PnPBIOS: Found PnP BIOS installation structure at 0xc00fc480
    PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc4b0, dseg 0xf0000
    PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
    PCI: Using ACPI for IRQ routing
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
    ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 20
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 23 (level, low) -> IRQ 23
    number of MP IRQ sources: 15.
    number of IO-APIC #4 registers: 24.
    testing the IO APIC.......................
    IO APIC #4......
    .... register #00: 04000000
    ....... : physical APIC id: 04
    ....... : Delivery Type: 0
    ....... : LTS : 0
    .... register #01: 00178020
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 1
    ....... : IO APIC version: 0020
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 00F 0F 0 0 0 0 0 1 1 39
    02 00F 0F 0 0 0 0 0 1 1 31
    03 00F 0F 0 0 0 0 0 1 1 41
    04 00F 0F 0 0 0 0 0 1 1 49
    05 00F 0F 0 0 0 0 0 1 1 51
    06 00F 0F 0 0 0 0 0 1 1 59
    07 00F 0F 0 0 0 0 0 1 1 61
    08 00F 0F 0 0 0 0 0 1 1 69
    09 00F 0F 0 1 0 0 0 1 1 71
    0a 00F 0F 0 0 0 0 0 1 1 79
    0b 00F 0F 0 0 0 0 0 1 1 81
    0c 00F 0F 0 0 0 0 0 1 1 89
    0d 00F 0F 0 0 0 0 0 1 1 91
    0e 00F 0F 0 0 0 0 0 1 1 99
    0f 00F 0F 0 0 0 0 0 1 1 A1
    10 00F 0F 1 1 0 1 0 1 1 A9
    11 00F 0F 1 1 0 1 0 1 1 C9
    12 00F 0F 1 1 0 1 0 1 1 B9
    13 00F 0F 1 1 0 1 0 1 1 B1
    14 00F 0F 1 1 0 1 0 1 1 D1
    15 000 00 1 0 0 0 0 0 0 00
    16 000 00 1 0 0 0 0 0 0 00
    17 00F 0F 1 1 0 1 0 1 1 C1
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    IRQ20 -> 0:20
    IRQ23 -> 0:23
    .................................... done.
    Starting balanced_irq
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x0
    Initializing Cryptographic API
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    input: AT Translated Set 2 keyboard on isa0060/serio0
    NET: Registered protocol family 2
    IP: routing cache hash table of 16384 buckets, 128Kbytes
    TCP: Hash tables configured (established 524288 bind 65536)
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    ACPI: (supports S0 S1 S3 S4 S5)
    RAMDISK: cramfs filesystem found at block 0
    RAMDISK: Loading 4480 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
    VFS: Mounted root (cramfs filesystem) readonly.
    Freeing unused kernel memory: 160k freed
    NET: Registered protocol family 1
    SCSI subsystem initialized
    libata version 1.02 loaded.
    ata_piix version 1.02
    ata_piix: combined mode detected
    ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
    ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:207f
    ata1: dev 0 ATA, max UDMA/133, 72303840 sectors: lba48
    ata1: dev 0 configured for UDMA/133
    scsi0 : ata_piix
    Using anticipatory io scheduler
    Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0
    Type: Direct-Access ANSI SCSI revision: 05
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
    ata2: dev 0 cfg 49:0f00 82:0218 83:4000 84:4000 85:0218 86:0000 87:4000 88:0407
    ata2: dev 0 ATAPI, max UDMA/33
    ata2: dev 0 configured for UDMA/33
    scsi1 : ata_piix
    sata_promise version 1.00
    ACPI: PCI interrupt 0000:03:04.0[A] -> GSI 23 (level, low) -> IRQ 23
    ata3: SATA max UDMA/133 cmd 0xF8828200 ctl 0xF8828238 bmdma 0x0 irq 23
    ata4: SATA max UDMA/133 cmd 0xF8828280 ctl 0xF88282B8 bmdma 0x0 irq 23
    ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
    ata3: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
    ata3: dev 0 configured for UDMA/133
    scsi2 : sata_promise
    ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:207f
    ata4: dev 0 ATA, max UDMA/133, 320173056 sectors: lba48
    ata4: dev 0 configured for UDMA/133
    scsi3 : sata_promise
    Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
    Type: Direct-Access ANSI SCSI revision: 05
    Vendor: ATA Model: Maxtor 6Y160M0 Rev: YAR5
    Type: Direct-Access ANSI SCSI revision: 05
    SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
    SCSI device sda: drive cache: write back
    /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
    SCSI device sdb: drive cache: write back
    /dev/scsi/host2/bus0/target0/lun0: p1
    Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
    SCSI device sdc: 320173056 512-byte hdwr sectors (163929 MB)
    SCSI device sdc: drive cache: write back
    /dev/scsi/host3/bus0/target0/lun0: p1
    Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 457812k swap on /dev/sda5. Priority:-1 extents:1
    EXT3 FS on sda2, internal journal
    Real Time Clock Driver v1.12
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
    NTFS driver 2.1.15 [Flags: R/O MODULE].
    NTFS volume version 3.1.
    NTFS volume version 3.1.
    e1000: Ignoring new-style parameters in presence of obsolete ones
    Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
    Copyright (c) 1999-2004 Intel Corporation.
    ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:02:01.0 to 64
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: irq 23, pci mem f8849000
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    PCI: cache line size of 128 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    input: PC Speaker
    input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
    mice: PS/2 mouse device common for all mice
    ts: Compaq touchscreen protocol output
    psmouse.c: Failed to enable mouse on isa0060/serio1
    inserting floppy driver for 2.6.8
    FDC 0 is a post-1991 82077
    parport: PnPBIOS parport detected.
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected an Intel i875 Chipset.
    agpgart: Maximum main memory to use for agp memory: 1919M
    agpgart: AGP aperture is 128M @ 0xe0000000
    cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: shpc_init : shpc_cap_offset == 0
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: irq 16, io base 0000bc00
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: irq 19, io base 0000b000
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: irq 18, io base 0000b400
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: irq 16, io base 0000b800
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 3-2: new low speed USB device using address 2
    usbcore: registered new driver hiddev
    input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    hw_random hardware driver 1.0.0 loaded
    ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    intel8x0_measure_ac97_clock: measured 49583 usecs
    intel8x0: clocking to 48000
    ieee1394: Initialized config rom entry `ip1394'
    ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 20
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fa125000-fa1257ff] Max Packet=[2048]
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800002eb1b1]
    ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
    ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
    NET: Registered protocol family 17
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c0305060(lo)
    IPv6 over IPv4 tunneling driver
    lp0: using parport0 (interrupt-driven).
    atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
    eth0: no IPv6 routers present
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.
    atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.


    Module Size Used by
    sr_mod 18340 0
    vfat 16128 0
    fat 48032 1 vfat
    lp 12068 0
    binfmt_misc 13320 1
    ipv6 277508 21
    af_packet 24456 2
    eth1394 23304 0
    ohci1394 36868 0
    ieee1394 111544 2 eth1394,ohci1394
    snd_intel8x0 37548 0
    snd_ac97_codec 69764 1 snd_intel8x0
    snd_pcm_oss 54824 0
    snd_mixer_oss 20736 1 snd_pcm_oss
    snd_pcm 100384 2 snd_intel8x0,snd_pcm_oss
    snd_timer 27780 1 snd_pcm
    snd_page_alloc 12680 2 snd_intel8x0,snd_pcm
    snd_mpu401_uart 9344 1 snd_intel8x0
    snd_rawmidi 26560 1 snd_mpu401_uart
    snd_seq_device 9224 1 snd_rawmidi
    snd 59364 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi, snd_seq_device
    soundcore 11616 1 snd
    hw_random 6676 0
    joydev 10944 0
    usbhid 32960 0
    uhci_hcd 33936 0
    shpchp 101260 0
    pciehp 97804 0
    pci_hotplug 35644 2 shpchp,pciehp
    intel_agp 23328 0
    intel_mch_agp 11536 1
    agpgart 35244 2 intel_agp,intel_mch_agp
    analog 13088 0
    gameport 6016 2 snd_intel8x0,analog
    parport_pc 36672 1
    parport 43080 2 lp,parport_pc
    floppy 61556 0
    tsdev 8448 0
    mousedev 11408 2
    psmouse 21000 0
    pcspkr 4812 0
    evdev 10624 0
    ehci_hcd 33028 0
    usbcore 119780 5 usbhid,uhci_hcd,ehci_hcd
    e1000 84868 0
    nls_cp437 6912 2
    ntfs 102356 2
    md 51016 0
    ide_cd 43140 0
    ide_core 139728 1 ide_cd
    cdrom 40736 2 sr_mod,ide_cd
    rtc 14920 0
    ext2 73576 0
    ext3 127336 1
    jbd 69400 1 ext3
    mbcache 11012 2 ext2,ext3
    sd_mod 22656 6
    sata_promise 11268 1
    ata_piix 9220 3
    libata 41604 2 sata_promise,ata_piix
    scsi_mod 126148 4 sr_mod,sd_mod,sata_promise,libata
    unix 31536 378


    Character devices:
    1 mem
    2 pty
    3 ttyp
    4 /dev/vc/0
    4 tty
    4 ttyS
    5 /dev/tty
    5 /dev/console
    5 /dev/ptmx
    6 lp
    7 vcs
    10 misc
    13 input
    14 sound
    29 fb
    116 alsa
    128 ptm
    136 pts
    171 ieee1394
    180 usb
    254 devfs

    Block devices:
    1 ramdisk
    2 fd
    8 sd
    9 md
    11 sr
    65 sd
    66 sd
    67 sd
    68 sd
    69 sd
    70 sd
    71 sd
    128 sd
    129 sd
    130 sd
    131 sd
    132 sd
    133 sd
    134 sd
    135 sd
    254 mdp

  2. #2
    Just Joined!
    Join Date
    Sep 2004
    Posts
    2

    Anything?

    Anyone? I STILL have had no success with this. Any help would be really appreciated!

    eric

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •