Find the answer to your Linux question:
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
I got this problem after i install suse i connect to network. my question do i need to update the driver? if yes how?...
  1. 06-03-2010 #1
    nilobaniel
    nilobaniel is offline
    Just Joined!
    Join Date
    Jun 2010
    Posts
    6

    How to install lan driver 0f MFSYS25 for suse

    I got this problem after i install suse i connect to network. my question do i need to update the driver? if yes how?
    Reply With Quote Reply With Quote
  2. 06-03-2010 #2
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,144
    Hello and Welcome
    Open a terminal window in SuSe and issue this command please, and post your results here.
    Code:
    lspci -nn
    This will tell us what chipset it has and therefore which driver you need, if any.
    Go ahead and post the output of these too.
    Code:
    lsmod
    Code:
    ifconfig
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  3. 06-03-2010 #3
    nilobaniel
    nilobaniel is offline
    Just Joined!
    Join Date
    Jun 2010
    Posts
    6
    00:03.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
    Express Root Port 3 [8086:340a] (rev 13)
    00:06.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
    Express Root Port 6 [8086:340d] (rev 13)
    00:07.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
    Express Root Port 7 [8086:340e] (rev 13)
    00:09.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
    Express Root Port 9 [8086:3410] (rev 13)
    00:03.0 PCI bridge [0604]: intel corporation Quickpath Architecture I/O Hub PCI
    Express Root Port 10 [8086:3411] (rev 13)
    00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer
    Registers Port 0 [8060:3425] (rev 13)
    00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8060:3426] (rev 13)
    00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer
    Registers Port 1 [8060:3427] (rev 13)
    00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Routing ang Protocol Layer Registers Port 1 [8060:3428] (rev 13)


    linux-hq6n:/home/ingres/desktop #lsmode
    Module Size Used by
    e1000e 1155108 0
    nls_iso8859_1 20480 0
    nls_cp437 22144 0
    vfat 28800 0
    fat 66720 1 vfat
    xt_tcpudp 19584 1
    xt_pkttype 18304 3
    ipt_Log 27788 8
    xt_limmit 19076 8
    binfmt_misc 28040 1
    cpufreq_conservative 24456 0
    cpufreg_userspace 22660 0
    cpufreg_powersave 18176 0
    acpi_cpufreg 26380 3
    speedstep_lib 21598 0
    ipt_REJECT 20352 3
    xt_state 18944 4
    iptable_mangle 19712 0
    iptablenat_nat 23688 0
    nf_nat 35736 1 iptable_nat
    iptable_filter 19840 1
    nf_conntrack_netios_ns 19200 0
    nf_conntrack_ipv4 27652 7 iptable-nat,nf_nat
    nf_conntrack 79188 5 xt_state,iptable_nat,nf_conntrack_netbios
    _ns,nf_conntrack_ipv4
    ip_tables 30224 0
    ip6_tables 31376 0
    x_tables 33668 9 xt_tcpudp,xt_pkttype,ipt_LOG,xtlimit,ipt_REJECT
    ,xt_state,iptable_nat,ip_tables,ip6_tables
    Reply With Quote Reply With Quote
  4. 06-04-2010 #4
    MikeTbob
    MikeTbob is offline
    Super Moderator MikeTbob's Avatar
    Join Date
    Apr 2006
    Location
    Texas
    Posts
    7,144
    What about the result of
    Code:
    ifconfig
    I see that the e1000 module is loading, but I don't see a card listed in the lspci output....is it a PCMCIA or USB card?
    I do not respond to private messages asking for Linux help, Please keep it on the forums only.
    All new users please read this.** Forum FAQS. ** Adopt an unanswered post.
    Reply With Quote Reply With Quote
  5. 06-07-2010 #5
    nilobaniel
    nilobaniel is offline
    Just Joined!
    Join Date
    Jun 2010
    Posts
    6
    Mike sorry for the late reply... i don't have work on Saturday and Sunday.. here i am back to work...

    Code:
    linux-hq6n:/home/ingres/Desktop # lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3406] (rev 13)

00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13)

00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13)

00:06.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 6 [8086:340d] (rev 13)

00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13)

00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13)

00:0a.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13)

00:10.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 0 [8086:3425] (rev 13)

00:10.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13)

00:11.0 PIC [0800]: Intel Corporation QuickPath Interconnect Physical and Link Layer Registers Port 1 [8086:3427] (rev 13)

00:11.1 PIC [0800]: Intel Corporation QuickPath Interconnect Routing and Protocol Layer Registers Port 1 [8086:3428] (rev 13)

00:13.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 13)

00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13)

00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13)

00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13)

00:14.3 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Throttle Registers [8086:3438] (rev 13)

00:15.0 PIC [0800]: Intel Corporation Trusted Execution Technology Registers [8086:342f] (rev 13)

00:16.0 System peripheral [0880]: Intel Corporation DMA Engine [8086:3430] (rev 13)

00:16.1 System peripheral [0880]: Intel Corporation DMA Engine [8086:3431] (rev 13)

00:16.2 System peripheral [0880]: Intel Corporation DMA Engine [8086:3432] (rev 13)

00:16.3 System peripheral [0880]: Intel Corporation DMA Engine [8086:3433] (rev 13)

00:16.4 System peripheral [0880]: Intel Corporation DMA Engine [8086:3429] (rev 13)

00:16.5 System peripheral [0880]: Intel Corporation DMA Engine [8086:342a] (rev 13)

00:16.6 System peripheral [0880]: Intel Corporation DMA Engine [8086:342b] (rev 13)

00:16.7 System peripheral [0880]: Intel Corporation DMA Engine [8086:342c] (rev 13)

00:1a.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #4 [8086:3a37]

00:1a.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #5 [8086:3a38]

00:1a.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #6 [8086:3a39]

00:1a.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #2 [8086:3a3c]

00:1c.0 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 1 [8086:3a40]

00:1c.4 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 5 [8086:3a48]

00:1c.5 PCI bridge [0604]: Intel Corporation ICH10 PCI Express Port 6 [8086:3a4a]

00:1d.0 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #1 [8086:3a34]

00:1d.1 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #2 [8086:3a35]

00:1d.2 USB Controller [0c03]: Intel Corporation ICH10 USB UHCI Controller #3 [8086:3a36]

00:1d.7 USB Controller [0c03]: Intel Corporation ICH10 USB2 EHCI Controller #1 [8086:3a3a]

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)

00:1f.0 ISA bridge [0601]: Intel Corporation ICH10 LPC Interface Controller [8086:3a16]

00:1f.3 SMBus [0c05]: Intel Corporation ICH10 SMBus Controller [8086:3a30]

1:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)

01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)

04:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 08)

08:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)




    Code:
    linux-hq6n:/home/ingres/Desktop # lsmod
Module   


Size  Used by

xt_tcpudp              19584  1 

xt_pkttype             18304  3 

ipt_LOG             22788  8 

xt_limit               19076  8 

binfmt_misc            28040  1 

ipt_REJECT             20352  3 

xt_state               18944  4 

iptable_mangle         19712  0 

iptable_nat            23688  0 

nf_nat                 35736  1 iptable_nat

iptable_filter         19840  1 

cpufreq_conservative    24456  0 

cpufreq_userspace      22660  0 

cpufreq_powersave      18176  0 

nf_conntrack_netbios_ns    19200  0 

nf_conntrack_ipv4      27652  7 iptable_nat,nf_nat

acpi_cpufreq           26380  3 

nf_conntrack           79188  5 xt_state,iptable_nat,nf_nat,nf_conntrack_netbios_ns,nf_conntrack_ipv4

speedstep_lib          21508  0 

ip_tables              30224  3 iptable_mangle,iptable_nat,iptable_filter

ip6_tables             31376  0 

x_tables               33668  9 xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables
microcode              30608  0 

firmware_class         25984  1 microcode

fuse                   66332  3 

loop                   35332  0 

dm_mod                 78676  0 

rtc_cmos               27168  0 

rtc_core               37148  1 rtc_cmos
i2c_i801               26128  0 

rtc_lib                19328  1 rtc_core
i2c_core               41108  1 i2c_i801
button                 25360  0 

igb                    89604  0 

sg                     52020  0 

usbhid                 60260  0 

hid                    53708  1 usbhid
ff_memless             21896  1 usbhid
uhci_hcd               40848  0 

ehci_hcd               52492  0 

usbcore               164684  4 usbhid,uhci_hcd,ehci_hcd

sd_mod                 45208  4 

edd                    26440  0 

ext3                  155784  2 

mbcache                25348  1 ext3

jbd                    73376  1 ext3

fan                    22660  0 

mptsas                 47624  3 

mptscsih               43648  1 mptsas
mptbase                77016  2 mptsas,mptscsih
scsi_transport_sas     48256  1 mptsas

scsi_mod              168308  5 sg,sd_mod,mptsas,mptscsih,scsi_transport_sas

thermal                39452  0 

processor              67504  2 acpi_cpufreq,thermal



    Code:
    linux-hq6n:/home/ingres/Desktop # ifconfig


eth0      Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4C  

          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:1822 errors:0 dropped:0 overruns:0 frame:0

          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 
          RX bytes:130611 (127.5 Kb)  TX bytes:4110 (4.0 Kb)

          Memory:b1a20000-b1a40000 



eth1      Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4D  

          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:2843 errors:0 dropped:0 overruns:0 frame:0

          TX packets:33 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000 

          RX bytes:192843 (188.3 Kb)  TX bytes:5152 (5.0 Kb)

          Memory:b1a00000-b1a20000 

lo        Link encap:Local Loopback  

          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:6493 errors:0 dropped:0 overruns:0 frame:0

          TX packets:6493 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0 

          RX bytes:928592 (906.8 Kb)  TX bytes:928592 (906.8 Kb)


linux-hq6n:/home/ingres/Desktop #
    Last edited by MikeTbob; 06-12-2010 at 12:11 PM.
    Reply With Quote Reply With Quote
  6. 06-12-2010 #6
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    If you are still having problems with this, here is what I see.

    You have two identical network cards:
    Code:
    1:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)
01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02)
    They use the igb driver, which is loading:
    Code:
    Size  Used by
igb                    89604  0
    And it does seem to have a network connection, on both cards:
    Code:
    eth0   Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4C  
          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1822 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:130611 (127.5 Kb)  TX bytes:4110 (4.0 Kb)
          Memory:b1a20000-b1a40000 

eth1   Link encap:Ethernet  HWaddr 00:15:17:B0:B5:4D  
          inet addr:192.168.50.250  Bcast:192.168.50.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2843 errors:0 dropped:0 overruns:0 frame:0
          TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:192843 (188.3 Kb)  TX bytes:5152 (5.0 Kb)
          Memory:b1a00000-b1a20000
    You do seem to be connected to a network, as your cards have IP addresses assigned to them. If your problem is that you cannot connect to the internet, then I would guess that you need to configure the cards.

    You need to run YaST, and go to the network configuration page. There you need to set a default gateway for each device. The default gateway is usually the IP address of the router that has internet access. Afterwards, you may need to reboot.

    Hope this helps.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  7. 06-13-2010 #7
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    I just noticed something, both cards have the exact same IP address! I don't think that this is possible using DHCP. Did you manually configure the IP address?

    You may want to change this.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  8. 06-15-2010 #8
    nilobaniel
    nilobaniel is offline
    Just Joined!
    Join Date
    Jun 2010
    Posts
    6
    Yes i already did it the configuration on YAST i manually configure it. the eth0 and eth1. i also try to configure it in defferent IP. but still i cannot ping another PC in the network..
    I can't understand why? since i am a newbie in linux...thanks waterhead...... more help plsssssss....
    Reply With Quote Reply With Quote
  9. 06-15-2010 #9
    waterhead
    waterhead is offline
    Linux Guru waterhead's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, Wisconsin
    Posts
    4,577
    Use DHCP to assign the IP address. If you need to have a specific IP address, have the router assign it. And do you really need two network cards? Remove one of them to help simplify things.

    Like I already said, you need to tell it where the router is. This is done by putting the router's IP address in the "default gateway" section.
    Paul

    Please do not send Private Messages to me with requests for help. I will not reply.
    Reply With Quote Reply With Quote
  10. 06-15-2010 #10
    nilobaniel
    nilobaniel is offline
    Just Joined!
    Join Date
    Jun 2010
    Posts
    6
    i need to configure it with static ip because i used it for a server. the two network card is built-in in intel modular server MFSYS25. i need to connect to this server throught IP address but i connot ping the server. i tried to configure the ip add. by this command; ifconfig eth0 192.168.50.250
    then i can ping the other PC in my network but when i restart the server it will return to old problem witch i cannot ping again..
    Reply With Quote Reply With Quote
Page 1 of 2 1 2 LastLast
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules